©
本文档使用
php.cn手册 发布
(PHP 4, PHP 5)
strcmp — 二进制安全字符串比较
$str1
, string $str2
)注意该比较区分大小写。
str1
第一个字符串。
str2
第二个字符串。
如果 str1
小于
str2
返回 < 0;
如果 str1
大于 str2
返回 > 0;如果两者相等,返回 0。
Example #1 strcmp() 例子
<?php
$var1 = "Hello" ;
$var2 = "hello" ;
if ( strcmp ( $var1 , $var2 ) !== 0 ) {
echo '$var1 is not equal to $var2 in a case sensitive string comparison' ;
}
?>
[#1] luizvid at gmail dot com [2015-10-04 22:01:50]
strcmp returns -1 ou 1 if two strings are not identical,
and 0 when they are, except when comparing a string and an empty string (
<?php $a = ""; ?>
), it returns the length of the string.
For instance:
<?php
$a = "foo"; // length 3
$b = ""; // empty string
$c = "barbar"; // length 6
echo strcmp($a, $a); // outputs 0
echo strcmp($a, $c); // outputs 1
echo strcmp($c, $a); // outputs -1
echo strcmp($a, $b); // outputs 3
echo strcmp($b, $a); // outputs -3
echo strcmp($c, $b); // outputs 6
echo strcmp($b, $c); // outputs -6
?>
[#2] chris at unix-ninja dot com [2013-10-01 18:52:47]
Since it may not be obvious to some people, please note that there is another possible return value for this function.
strcmp() will return NULL on failure.
This has the side effect of equating to a match when using an equals comparison (==).
Instead, you may wish to test matches using the identical comparison (===), which should not catch a NULL return.
---------------------
Example
---------------------
$variable1 = array();
$ans === strcmp($variable1, $variable2);
This will stop $ans from returning a match;
Please use strcmp() carefully when comparing user input, as this may have potential security implications in your code.
[#3] lehal2 at hotmail dot com [2013-01-01 23:32:28]
i hope this will give you a clear idea how strcmp works internally.
<?php
$str1 = "b";
echo ord($str1); //98
echo "<br/>";
$str2 = "t";
echo ord($str2); //116
echo "<br/>";
echo ord($str1)-ord($str2);//-18
$str1 = "bear";
$str2 = "tear";
$str3 = "";
echo "<pre>";
echo strcmp($str1, $str2); // -18
echo "<br/>";
echo strcmp($str2, $str1); //18
echo "<br/>";
echo strcmp($str2, $str2); //0
echo "<br/>";
echo strcmp($str2, $str3); //4
echo "<br/>";
echo strcmp($str3, $str2); //-4
echo "<br/>";
echo strcmp($str3, $str3); // 0
echo "</pre>";
?>
[#4] jendoj at gmail dot com [2012-05-07 11:00:38]
If you rely on strcmp for safe string comparisons, both parameters must be strings, the result is otherwise extremely unpredictable.
For instance you may get an unexpected 0, or return values of NULL, -2, 2, 3 and -3.
strcmp("5", 5) => 0
strcmp("15", 0xf) => 0
strcmp(61529519452809720693702583126814, 61529519452809720000000000000000) => 0
strcmp(NULL, false) => 0
strcmp(NULL, "") => 0
strcmp(NULL, 0) => -1
strcmp(false, -1) => -2
strcmp("15", NULL) => 2
strcmp(NULL, "foo") => -3
strcmp("foo", NULL) => 3
strcmp("foo", false) => 3
strcmp("foo", 0) => 1
strcmp("foo", 5) => 1
strcmp("foo", array()) => NULL + PHP Warning
strcmp("foo", new stdClass) => NULL + PHP Warning
strcmp(function(){}, "") => NULL + PHP Warning
[#5] hrodicus at gmail dot com [2011-02-28 06:40:17]
Note a difference between 5.2 and 5.3 versions
echo (int)strcmp('pending',array());
will output -1 in PHP 5.2.16 (probably in all versions prior 5.3)
but will output 0 in PHP 5.3.3
Of course, you never need to use array as a parameter in string comparisions.
[#6] hm2k at php dot net [2010-08-02 04:41:38]
Don't forget the similar_text() function...
http://php.net/manual/en/function.similar-text.php
[#7] Rob Wiesler [2009-07-21 12:48:21]
One big caveat - strings retrieved from the backtick operation may be zero terminated (C-style), and therefore will not be equal to the non-zero terminated strings (roughly Pascal-style) normal in PHP. The workaround is to surround every `` pair or shell_exec() function with the trim() function. This is likely to be an issue with other functions that invoke shells; I haven't bothered to check.
On Debian Lenny (and RHEL 5, with minor differences), I get this:
====PHP====
<?php
$sz = `pwd`;
$ps = "/var/www";
echo "Zero-terminated string:<br />sz = ".$sz."<br />str_split(sz) = "; print_r(str_split($sz));
echo "<br /><br />";
echo "Pascal-style string:<br />ps = ".$ps."<br />str_split(ps) = "; print_r(str_split($ps));
echo "<br /><br />";
echo "Normal results of comparison:<br />";
echo "sz == ps = ".($sz == $ps ? "true" : "false")."<br />";
echo "strcmp(sz,ps) = ".strcmp($sz,$ps);
echo "<br /><br />";
echo "Comparison with trim()'d zero-terminated string:<br />";
echo "trim(sz) = ".trim($sz)."<br />";
echo "str_split(trim(sz)) = "; print_r(str_split(trim($sz))); echo "<br />";
echo "trim(sz) == ps = ".(trim($sz) == $ps ? "true" : "false")."<br />";
echo "strcmp(trim(sz),ps) = ".strcmp(trim($sz),$ps);
?>
====Output====
Zero-terminated string:
sz = /var/www
str_split(sz) = Array ( [0] => / [1] => v [2] => a [3] => r [4] => / [5] => w [6] => w [7] => w [8] => )
Pascal-style string:
ps = /var/www
str_split(ps) = Array ( [0] => / [1] => v [2] => a [3] => r [4] => / [5] => w [6] => w [7] => w )
Normal results of comparison:
sz == ps = false
strcmp(sz,ps) = 1
Comparison with trim()'d zero-terminated string:
trim(sz) = /var/www
str_split(trim(sz)) = Array ( [0] => / [1] => v [2] => a [3] => r [4] => / [5] => w [6] => w [7] => w )
trim(sz) == ps = true
strcmp(trim(sz),ps) = 0
[#8] wsogmm at seznam dot cz [2009-05-16 08:45:03]
Just a short comment to the note of arnar at hm dot is: md5() is a hash function and therefore it may happen (although it is very unlikely) that the md5() checksums of two different strings will be equal (hash collision) ...
[#9] arnar at hm dot is [2009-05-15 07:51:06]
Sometimes when you compare two strings that look "the same", you will find that they aren't. If you don't want to bother finding out why, then this is a simple solution:
$string = implode(str_split($string));
Converting the strings to md5 is also a nice method to see if they're equal.
md5($str1)."\n";
md5($str2)."\n\n";
____________
Arnar Yngvason
ThinkSoftware
[#10] nullhility at gmail dot com [2009-03-15 02:36:41]
For those that are confused about the way this function works:
<?php
$str1 = 'a';
$str2 = 'b';
var_dump(strcmp($str1, $str2)); //int(-1)
?>
Alphabetically 'a' precedes 'b'. If we view the strings as values 'a' is less than 'b' and therefore the function returns -1.
If we were searching through an alphabetically sorted list we'd have a numerical index ($i) and compare the search string ($sstr) against each member of the string list ($slist), using strcmp we can check whether to go "up"($i++) or "down"($i--) through this list.
Here's the example function:
<?php
function strInList ($sstr)
{
$slist = array('a', 'b', 'c', 'd', 'e' );
$i = sizeof($slist) / 2; //start the index in the middle
while ($i < sizeof($slist) && $i >= 0) { //constrain $i to the scope of $slist
$cmp = strcmp($slist[$i], $sstr);
if ($cmp > 0) { //alphabetically, $slist[$i] procedes $sstr
$i--; //move DOWN the list
} else if ($cmp < 0) { //alphabetically, $slist[$i] precedes $sstr
$i++; //move UP the list
} else if ($cmp == 0) { //$slist[$i] occurs neither before nor after $sstr
return true; //successful match
}
}
return false; //The index fell out of the list scope, with no match made
}
?>
[#11] g-lock at nv-net.ru [2008-06-18 23:08:00]
Here is my function to compare russian words.
You can replace $abc to your alphabet.
function strcmp_rus($str1, $str2)
{
$abc = "??????????????????????????????????????????????????????????????????
???????????????????????????????????";
$len = min(strlen($str1), strlen($str2));
for ($i = 0; $i < $len; $i++)
{
$s1 = strlen($abc);
$s2 = strlen($abc);
for ($j = 0; $j < strlen($abc); $j++) if ($str1[$i] == $abc[$j]) $s1 = $j;
for ($k = 0; $k < strlen($abc); $k++) if ($str2[$i] == $abc[$k]) $s2 = $k;
if ($s1 < $s2) return -1;
else if ($s1 > $s2) return 1;
}
return 0;
}
[#12] M. Egmond [2006-08-22 03:21:24]
php dot or dot die at phpuser dot net wrote that he had an unexpected difference in comparing between case sensitive and insensitive. They key there is that the case insensitive comparison converts both strings to lowercase before comparing. Since the underscore character is in a different place when compared to an uppercase or lowercase string, the result is different.
There is no 'clear' order of punctuation and other characters in or around the alphabet. Most code assumes ASCII order in which case there are several characters before both upper- and lowercase, a few inbetween, and some after both upper- and lowercase.
Note also many other/older implementations of sorting sort accented character wrong since they appear after all other alphabetical characters in most charactersets. There is probably a function in PHP to take this into account though.
Therefore I would not recommend to make a detailed assumption on how punctuation and other characters sort in relation to alphabetical characters. If sorting these characters at a specific place and in a specific order is important for you, you should probably write a custom string comparison function that does it the way you want. Usually it's sufficient to have a consistent sorting order though, which is what you get by using either strcmp, or strcasecmp consistently.
[#13] jeff at skrysak dot com [2006-08-03 07:36:53]
The definition of return values of this function is listed correctly on this page, however, there is a common misconception in the notes posted here previously from users.
A previous poster said:
If $str1 == $str2 strcmp return 0.
If $str1? > $str2 strcmp return 1.
If $str1? < $str2 strcmp return -1.
That is incorrect, please look at the definition of the function
at the top of this page. It returns less than 0 if str1 is less than str2. Note the phrase "less than", it does not return just -1, but any negative value. The same happens when str1 is greater than str2, but it returns a positive, non-zero value. It returns a positive value that can be 1, or any number thereafter.
strcmp() returns a number that is the difference between the two strings starting with the last character that was found to be similar.
Here is an example:
$output = strcmp("red", "blue");
The variable $output with contain a value of 16
[#14] francis at flourish dot org [2005-12-08 06:57:36]
If you want to strings according to locale, use strcoll instead.
[#15] element @ no spam dot net [2005-02-19 15:42:37]
When using strcmp to compare results received from a form, keep in mind that the way you decide to encapsulate the value of the form will have an effect on your strcmp() results.
Example:
<input type="post" name="user[0]" value="abc">
<input type="post" name="user[1]" value='abc'>
strcmp() will not return the values sent from this form as "0".
However, by using single-quotes or double-quotes to encapsulate BOTH values, strcmp() will return a "0" result.
[#16] jcanals at totsoft dot com [2004-01-30 18:05:23]
Some notes about the spanish locale. I've read some notes that says "CH", "RR" or "LL" must be considered as a single letter in Spanish. That's not really tru. "CH", "RR" and "LL" where considered a single letter in the past (lot of years ago), for that you must use the "Tradictional Sort". Nowadays, the Academy uses the Modern Sort and recomends not to consider anymore "CH", "RR" and "LL" as a single letter. They must be considered two separated letters and sort and compare on that way.
Ju just have to take a look to the Offial Spanish Language Dictionary and you can see there that from many years ago there is not the separated section for "CH", "LL" or "RR" ... i.e. words starting with CH must be after the ones starting by CG, and before the ones starting by CI.
[#17] gregd at sad dot net [2003-09-08 11:49:17]
In cases when you need to compare a line from a just parsed file stream to match a user-defined "nametag" (useful for parsing ini and configuration files), keep in mind the 'end of line' tags as well:
// nametag to look for in a file (notice a required "\r\n" at the end)
$nametag = "[System]\r\n";
// ...assuming the file has been aready opened for reading and the stream is bound to $filehandle... parse the file until an EOF or $nametag encountered.
while (!feof ($handle))
{
$buffer = fgets($filehandle);
if (strcmp($nametag, $buffer) == 0)
{
// at this point "[System]" is found, do additional parsings...
break;
}
}
[#18] admin[nospam] at pretend dot tk [2003-06-17 19:44:15]
Reguarding the above note on language specific string comparisons, LL and RR are also single letters in the Spanish language.
[#19] izhan dot khalib at acpibhd dot com [2002-12-16 23:13:19]
I have tried the strcmp function. Pls be very carefull. The string comparison must exactly "equal". So many people had confused.
I.e
My program read a string from test.txt file to get the
"[company name]" string.
// get contents of a file into a string
$filename = "test.txt";
$fd = fopen ($filename, "rb");
$contents = fread ($fd, filesize ($filename));
for($i=0;$i<strpos($contents, "]")+1;$i++)
{
//print $contents[$i];
//$a=trim($contents[$i]);
$a=$contents[$i];
echo $a;
//echo $i;
}
$str2="[companyname]";
// this comparison will resulted on greater (1), $result=1
//please remember $tempvariable[2] != $tempvariable (is not equal)
$result = strcmp(strtolower($a),strtolower($str2));
//this comparison working properly, $result=0
//$result = strcmp(strtolower($a),strtolower($str2[12]));
echo $result;
if ($a==$str2[12]) //double check the equality of string
{
echo "read the NextLine"; }
else {
echo "not equal";
}
//end
fclose ($fd);
?>
I hope the above example will help you.
[#20] madsen at sjovedyr dot dk [2002-10-02 11:59:33]
It's definitely worth noting that the return-values of strcmp() when used for i.e. password-checking is the oposite of that of the ==-operator.
I.e.:
$pw1 = "yeah";
$pw2 = "yeah";
if (strcmp($pw1, $pw2)) { // This returns false.
// $pw1 and $pw2 are NOT the same.
} else {
// $pw1 and $pw2 are the same.
}
Where the use of the == operator would give us.:
if ($pw1==$pw2) { // This returns true.
// $pw1 and $pw2 are the same.
} else {
// $pw1 and $pw2 are NOT the same.
}
Additionally, to check if $pw1 and $pw2 are of the same type you can use the === operator.
[#21] [2002-08-27 06:45:47]
[#22] owen at cips dot nokia dot com [2000-11-03 16:23:02]
Regarding bizarre return values from str*cmp(), I was having similar troubles until I realized that I was attempting to compare a string with HTML formatting with its plain-text equivilant. The formatted string was an <OPTION> value, so the HTML was rendered without the <b> and <i> formatting I was using. Consequently the formatted and unformatted strings were rendered identically in the browser. D'oh!
[#23] frewuill at merlin-corp dot com [2000-02-28 14:49:38]
Hey be sure the string you are comparing has not special characters like '\n' or something like that.