Can you still save things when making a boot disk using a USB flash drive?

php editor Banana’s answer: When making a boot disk, you usually need to format the U disk, which will clear all data on the U disk. Moreover, the boot disk produced usually uses the entire USB disk space to install the boot system, so other files cannot be directly stored. However, some tools for making a boot disk provide a "reserve space" or "partition" function, which allows you to reserve a part of the free space for storing files while making a boot disk. You can store additional files on your startup disk by simply selecting the appropriate settings when making it. However, it should be noted that this part of the space will be regarded as an independent partition and will not be automatically mounted when the system is started. Manual operation is required to access it. Therefore, if you need to access files frequently, it is recommended to use other storage devices to avoid cumbersome operations.

Prepare a storage device of more than 8g, preferably 16g or 32g, because modern system images are larger and a smaller capacity will be better.

Then search for a PE production tool. I use u depth here

Then just download and install it directly. After downloading and installing, open the software Select the USB disk we inserted

. During the production process, click one-click production to start production. Please note that if you have installed software such as 360, you need to exit first because they may occupy the USB disk and cause the production to fail.

After we finished making it, we put the image into the USB boot disk. I have already tested it here.

Reinstall using the USB disk System or solving other problems is very simple. First, we need to prepare a bootable USB flash drive, which contains system installation files or other related tools. Then, follow the boot menu shortcut keys of different computers (usually pressing F12) to choose to boot from the USB disk. In this way, we can enter the U disk interface and follow the prompts to reinstall the system or solve other problems.

Then make a selection. After it is loaded and enters the system, we can start the installation.

After the system is loaded, we choose this u depth for one-click installation and select The system image we just put in

and then just execute the installation directly

Then we just need to wait for it to complete. This is actually Very simple

The above is the detailed content of Can you still save things when making a boot disk using a USB flash drive?. For more information, please follow other related articles on the PHP Chinese website!