Computer startup display recovery

The computer always shows that Windows is recovering when it is turned on

The laptop shows that Windows is recovering when it is turned on. This is usually because the system did not shut down properly the last time it was shut down, resulting in the system Automatic repair is required on startup. In this case, Windows will automatically start the system recovery program to try to solve problems such as file system errors and hard disk failures.

Your system has completely collapsed. At this time, it is recommended that you don’t think too much and just find a master who knows the system to help you reinstall your system. (This situation applies to when the system crashes. The system is recovering and the recovery time is more than 20 minutes. It can basically be determined that the system has crashed.

When the computer is turned on, it shows that Windows is being restored. In this case, it means that the operating system has The boot files, system registry, and system files necessary for booting into the system are damaged or are missing or damaged. The specific solutions are as follows. Method 1: Restart the computer, press F8 immediately after the self-test, and select "Last Known Good Configuration".

What to do if the computer prompts that your device needs to be restored when it is turned on

You can press and hold the power button until the machine is powered off, then turn it on again, and then power off again, repeat 3-5 times until you enter the picture below Recovery mode. ② From the selection option screen, please click or click Troubleshooting

It may be a virus that causes the system to malfunction. Use anti-virus software to detect and disinfect the virus. Because the installed software or plug-ins are compatible with the system The performance is not good and a conflict occurs. Just delete the conflicting software.

Restart the computer. After the computer displays the hardware information and before entering the Windows interface, press the F8 key. In the option menu that appears, select: Last time Correct configuration. After selecting, press Enter and the computer will automatically enter the system. After entering the system, the computer has been restored to the last correct configuration.

Try to use the repair function that comes with Windows: Select " Advanced Options" and then select "Troubleshooting" "Advanced Options" "Automatic Repair". The system will try to automatically repair any file system errors or startup errors.

The computer starts up and displays Windows error recovery. What is the reason and how to Solution

1. Windows error recovery occurs when the computer starts, which is caused by setting errors. The solution is as follows: Restart the computer, then press the F8 key during startup to enter the menu. Select the option in the startup menu and click to enter .

2. The laptop shows that Windows is recovering when it is turned on. This is usually because the system did not shut down properly the last time it was shut down, resulting in the need for automatic repair when the system starts. In this case, Windows will automatically start System recovery program to try to solve problems such as file system errors, hard disk failures, etc.

3. Restart, check whether the hardware devices are working properly, and check whether there are any abnormal software on the computer. Use safe mode to run recovery Tools that can help restore system health and potentially resolve Windows error recovery issues.

The above is the detailed content of Computer startup display recovery. For more information, please follow other related articles on the PHP Chinese website!