Why does the h81 motherboard not enter the system when it is turned on?

php editor Xinyi will answer for you: The H81 motherboard's failure to boot into the system may be caused by a variety of reasons, including hardware failure, driver problems, system errors, etc. You can first check whether the hardware connection is normal and try to restart the computer or enter safe mode. If the problem is not resolved, you may need to update your drivers or perform a system repair. If the problem persists, it is recommended to contact a professional for further investigation and repair.

#h81 motherboard cannot enter the system when it is turned on?

h81 motherboard failure to boot into the system may be caused by the following reasons:

1. System software failure: It may be that the operating system crashes or the startup file is lost, etc., and it needs to be reinstalled or Repair the system.

2. Hardware failure: It may be a hard disk failure, memory failure, or other hardware problems on the motherboard. The faulty parts need to be checked and replaced.

3. BIOS setting problem: It may be that the BIOS setting is incorrect and the system cannot be booted. You need to enter the BIOS interface to adjust the settings.

4. Power supply problem: The power supply may be unstable or the power cord is loose. You need to check the power cord connection and power supply.

If you cannot troubleshoot the problem yourself, it is recommended to find a professional or repair center for inspection and repair.

What should I do if the Elsa motherboard cannot be booted into the system?

1. Turn on the computer and find that you cannot enter the system page.

2. At this time, you can check the bios, select boot, and view.

3. Whether the boot option #1 item exists windows boot manage.

4. If it exists, it means that the system is generally in good condition. You need to enter pe for further inspection. Before entering pe, set the fast boot in the boot to disabled, and then enter the secure boot in the security item to change the Secure boot control is set to disabled. Finally, use your own USB drive as the first boot (put your own USB drive in the boot option first), plug in the USB drive, and enter PE according to different brands of computers (press the shortcut key Enter).

5. Select boot repair, repair it a few times, and then restart to see if you can enter the system interface. If not, continue with the following steps. Select Disk Utility and select Hard Drive Test. If the result is excellent: 1. You can try to unplug the battery for a few minutes and then restart. 2. Dust cleaning treatment. 3. Unplug the graphics card, etc.

6. If the result is bad: you may need to replace the hard drive.

7. If it does not exist, it means that your computer system may have crashed and you need to reinstall the system. But you need to pay attention to a few points during the reinstallation process:

If the original system is win10 and the owner requires to install win7, you must pay attention to changing the guid format to mbr format when formatting the entire disk, otherwise you will not be able to Enter the pe interface.

The computer shows that the motherboard cannot enter the system?

1. Turn on the computer and find that you cannot enter the system page.

2. At this time, you can check the BIOS, select Boot, and view.

3. Whether BOOT Option #1 item exists Windows Boot manage.

4. If it exists, it means that the system is generally in good condition. You need to enter PE for further inspection. Before entering PE, set Fast Boot in Boot to Disabled, and then enter Secure Boot in the security item to change the Secure boot control is set to Disabled. Finally, use your U disk as the first boot (put your U disk first in the Boot option), plug in the U disk, and enter PE according to the computer of different brands (press the shortcut key Enter).

5. Select boot repair, repair it a few times, and then restart to see if you can enter the system interface. If not, continue with the following steps. Select Disk Utility and select Hard Drive Test. If the result is excellent: 1. You can try to unplug the battery for a few minutes and then restart. 2. Dust cleaning treatment. 3. Unplug the graphics card, etc.

Reinstalling the system and I don’t know which motherboard it is, but I can’t enter the system by pressing the wrong key. What should I do?

If you cannot enter the system by pressing the wrong key, you can try to solve it by following the following steps:

First, try to boot the system from a CD or USB flash drive.

Secondly, press F2 on the keyboard to enter the BIOS settings, adjust the device parameters to be detected before booting, select the correct boot device, and restart the system.

If you still cannot enter the system, you can try to uninstall all device drivers in the computer, reinstall the motherboard driver, and update the BIOS firmware version.

If all else fails, you may need to consider replacing the motherboard and reinstalling a new system. Before reinstalling the system, be sure to back up important data to avoid data loss.

The above is the detailed content of Why does the h81 motherboard not enter the system when it is turned on?. For more information, please follow other related articles on the PHP Chinese website!