bios settings settings usb boot

php editor Strawberry will introduce to you how to set the U disk as the boot device through BIOS settings. BIOS, or Basic Input Output System, is the first program loaded when the computer starts and controls the computer's hardware and software. In some cases, we may need to install or repair the system through a USB flash drive, which requires setting the USB flash drive as the boot device. You can achieve this easily with a simple BIOS setup. Next, let’s learn about the specific steps.

First, we need to connect the pre-prepared USB boot disk to the computer, and then restart the computer. When the startup screen appears, press the corresponding button to enter the BIOS setup. Different brands of computers may have different keys, so it is recommended that you check them by yourself to avoid confusion with the shortcut keys for one-click USB boot.

After entering the BIOS interface, we need to understand several important operation methods. First, you can use the arrow keys on your keyboard to move your cursor around to navigate through the different options. Secondly, the Enter key is usually used to confirm the selected item. Finally, press the F10 key to save the changes and exit the BIOS interface. Please note that the specific operation method may vary depending on the instructions on the BIOS interface. Please refer to the illustration.

2. After entering the BIOS interface, we move the cursor to "boot" and then find the option of our U disk (generally the U disk brand name will be displayed or starts with USB), the editor shows here is "removable device", which means "removable device", as shown in the picture:

3. Check the instructions and press the button to move up. We need to move "removable device" to the top , so that you can boot from the U disk, as shown in the picture:

After the setting is completed, press F10, select "yes", press Enter to confirm, and you can boot from the U disk after restarting (picture) ).

Finally restart the computer and enter the udeeppe startup interface

The above is the detailed content of bios settings settings usb boot. For more information, please follow other related articles on the PHP Chinese website!