Upload files on mac springboard machine?

Introduction: Today, this site will share with you the relevant content about uploading files on Mac springboard machine. If it can solve the problem you are facing now, don’t forget to pay attention to this site and start now!

How to create a shared folder between the intranet and the external network

1. The intranet defense path through FTP is ftp://aaa:aaa@1916130.247 It is convenient to use by adding the network location , the network location in the picture below can be opened directly like a local disk. After opening the network disk, as follows, gg is the public directory, and the others are department internal directories and files.

2. Next step is to enable file and printer sharing - next step - a while later - complete the wizard. I don't need to run the wizard on another computer. - Done - Restart. Repeat the same method on another computer. Then set the IP and get it automatically. As long as the router turns on the DHCP server function, it will be fine.

3. There are three ways to share files between different LANs: router link, network disk, and Weili synchronization. LANs with different router links are very common in our school, but each LAN can access each other. For example, shared folders can be opened in different LANs.

4. Let’s talk about how to share folders in such a LAN. 1. Start the computer, select Control Panel, then select Network and Internet, and finally select "Network and Sharing Center".

5. Intranet sharing: download Feiqiu software, which provides sharing functions; external network sharing: register a Baidu cloud disk (others are also available), upload the files that need to be shared to the network disk, and then select private To share, just tell the other party the link and password.

Configuration of the springboard machine connection server

First establish the springboard machine connection and configure the tunnel. Open XShell, click the File menu and then click New to pop up the new session properties window. The name is Springboard, the port is 22, and the host fills in the IP address assumed previously. Click User Authentication and fill in the SSH username and password to log in to the springboard machine.

The situation is local ssh to springboard machine A, and then ssh to server B. mobaxterm creates a new session. Check the red box and fill in the relevant information of springboard machine A, and fill in the relevant information of server B in the yellow box. Save That’s it.

B: Springboard machine C: The server process is usually like this a = b = c. In this case, if you log in through ssh, you will need to enter your password twice. It is more cumbersome. You can use the following steps to allow you to log in locally, You can log in directly to the server through ssh 4946.

Global block: configure instructions that affect nginx globally. Generally, there is a user group for running the nginx server, nginx process pid storage path, log storage path, configuration file introduction, the number of worker processes allowed to be generated, etc. events block: Configuration that affects the nginx server or the network connection to the user.

Bastion machine settings The automatic startup settings of the server are as follows: Log in to the bastion machine management interface and enter the "Device Management" page. Find the server that needs to be set to start automatically and click the "Edit" button. After entering the server editing page, click the "Advanced Settings" tab.

iterm2 in mac has rzsz installed, and it is available for local testing, but not on the Linux server_hundred...

Open SSH on the computer The client (such as Terminal on Mac OS X, or PuTTY on Windows) enters the host name or IP address on the PuTTY login interface. The default IP address of EdgeOS is 19161. When logging in for the first time, a host key is displayed. You will be asked to confirm saving the host key to the local database.

First connect the router to the Broadband Mode computer, as shown in the figure: Then open the browser and enter the router’s management address and login password. After logging in to the background, click the setup wizard, and then fill in the corresponding parameters according to the wizard's instructions.

Server-side installation 1) Install pppd Check whether pppd is installed on the Linux server. The default installation is in the /usr/sbin/ subdirectory.

If you have two or more computers in a home or small office, it is natural to want to form them into a network. For convenience of description, the following convention refers to it as a local area network. In a home environment, this network can be used to share resources, play games that require multi-person participation, share a modem and enjoy an Internet connection, etc.

「Xshell」Xshell springboard machine connects to the remote server through a tunnel

First establish the connection to the springboard machine and configure the tunnel. Open XShell, click the File menu and then click New to pop up the new session properties window. The name is Springboard, the port is 22, and the host fills in the IP address assumed previously. Click User Authentication and fill in the SSH username and password to log in to the springboard machine.

(1) Configure the bastion host IP and port: (2) Configure the login username and password. For example, select the first server and click Enter to confirm. Then enter the corresponding password to log in. On the basis of 1 Login to the bastion host, add the username and password to configure the login server.

Xshell supports various security features such as SSH1/SSH2 protocols, passwords, and DSA and RSA public key user authentication methods, and encrypts all traffic with various encryption algorithms.

iTem2 uses PEM files to log in via SSH on MAC

First, you need to install iterm2 yourself. After opening the iterm2 official website, click Download to download and install.

Later I came to mac and also used it. It's a pity that it has expired... So I searched online and found that iterm2 was recommended. My colleagues also recommended this. A brief summary of the advantages: It is refreshing to use and easy to operate.

At this point, after transferring this file to Mac OSX, you can execute ssh under Mac OSX to log in remotely. The command format I use is: ssh -2 user@ip -i myppk.ssh. Above, user and ip need to be replaced according to your actual situation. The myppk.ssh file name can also be specified by yourself.

securecrt is an excellent ssh client tool that has been used under Windows for a long time. It also has a MAC version. However, after a period of understanding and familiarity with iterm2, I found that it can completely replace securecrt under MAC. After all, securecrt is too expensive, costing 99 US dollars.

The springboard machine uploads files to the server and displays 0k

1. Use binary upload. If it still doesn’t work, your gateway has blocked the FTP protocol. However, FTP upload is slow. You can upload it after compression, and then decompress it online. ASP and PHP have corresponding online decompression tools, which only have a single file.

2. I can test it. It seems that what you are showing is different. There are no gallery and directory browsing tags, and the upload type is not displayed either. It should be that the device file cannot be read. Try modifying the site again and updating the cache.

3. Let’s analyze the reasons below: Some Internet cafes will limit the upload speed. You need to ensure that your mobile phone data is normal and that the Internet cafe has no restrictions; you can try to pause and resend, or directly cancel and resend.

4. If the Lenovo laptop displays 0k when opening, it means that the system is broken. Just use a good attitude to reinstall the system, so that the problem of the system being unable to start can be solved automatically and smoothly.

Conclusion: The above is all the content about uploading files on mac springboard machine that this site has compiled for you. Thank you for taking the time to read the content of this site. I hope it will be helpful to you. Don’t forget more related content. Find it on this site.

The above is the detailed content of Upload files on mac springboard machine?. For more information, please follow other related articles on the PHP Chinese website!