How to solve the problem that iPad cannot be turned off

Many iPad users often complain that they cannot turn off their iPad. This is a common problem that many users will encounter. Therefore, it becomes very necessary to solve this problem. If you are one of the users who encounter this problem, then we have some solutions to help you solve it. But before we continue, let’s first understand why users’ iPad won’t turn off after updating.

Why won’t my iPad turn off?

If you are one of the many iPad users complaining that my iPad has frozen and won’t turn off, then you need to know the possible reasons behind this issue.

Software Issue: Most of the time, it is a software issue that causes the iPad to freeze and won’t close in question. Therefore, you should check for bad apps or bad updates on iOS. If you find that the reason behind your problem is software related, you may find the solution below.

If your iPad won't turn off, it's most likely due to a hardware component failure. In order to resolve this issue, you need to go to an Apple service center for help. They'll inspect your iPad and repair or replace faulty hardware parts. So, if you encounter this problem, please contact the Apple Service Center in time.

Now that you have a general idea of ​​the cause of this problem, let’s explore possible solutions.

Eight Solutions to Fix iPad Won’t Turn Off

Here are some possible solutions that may solve your “iPad frozen and won’t turn off” issue. All methods are suitable for iPad Pro/Air 2/Air/4/3/2/1, iPad mini 4/3/2/1. Before you start using the following tips to repair your iPad, you'd better back up your device. Because some of the tips below will require you to wipe your iOS device. You can use iTunes or iCloud for backup or use Tenorshare iCareFone - a third-party tool that provides more flexible backup options.

• Solution 1: Force iPad to shut down
• Solution 2: Update iOS
• Solution 3: Turn on airplane mode
• Solution 4 : Enable AssistiveTouch off
• Solution 5: Put iPad into recovery mode
• Solution 6: Reset all settings
• Solution 7. Fix iPad won’t turn on without Turn off in case of data loss
• Solution 8: Turn on airplane mode

Solution 1: Force iPad to shut down

To solve the problem of iPad freezing, you can Restart the device. Here are the steps to turn off your iPad, follow these instructions: 1. Press and hold the power button on the top of the iPad until the slide to power off prompt appears on the screen. 2. Swipe on the screen to power off. 3. Wait a few seconds, then press and hold the power button again until the iPad restarts. Through this method, you can solve the problem of iPad freezing. hope it helps you!

Step 1: Press and hold the "Sleep" button and the iPad's "Home" button for about 8-10 seconds.

Step 2: Press and hold the power button and home button until the screen turns off, and then the Apple logo appears on the screen.

Solution 2: Update iOS

To resolve operating system-related issues, you need to update your iPad’s iOS. Please follow these steps: 1. Make sure your iPad is connected to the Internet. 2. Open the iPad’s Settings app. 3. In the settings menu, scroll down and find the "General" option. 4. Click on the "General" option and then scroll down to find "Software Update". 5. Click on the "Software Update" option and the system will start checking for available updates. 6. If an update is available, the system will display an update version number and a Download and Install button. 7. Click the Download and Install button and follow the on-screen prompts to complete the update process. 8. Once the update is complete, your iPad will restart and your operating system will be up to date. By updating your iPad’s iOS, you can resolve operating system-related issues. Please follow the steps above to ensure your iPad is always up to date with the latest operating system version.

Step 1: To update your device, you need to connect your iPad to a power source. Make sure it's connected to a strong Wi-Fi network.

The second step is to go to the settings menu, then click on the general options and then find the software update option.

Step 3: If an update is available, you can simply download and install it. Make sure your device is connected to the network and power source throughout the process.

Solution 3: Turn on airplane mode

Sometimes, turning on airplane mode may also solve the problem. Basically, airplane mode disconnects all connections from your iPhone.

Step 1: Swipe up to open Control Center on iPad.

Step 2: Please click the airplane mode button on your device. This will put your device into airplane mode. Wait a moment and your device will successfully switch to airplane mode. Please wait a few minutes and then you can try to exit airplane mode and observe whether the device works normally.

Solution 4: Enable AssistiveTouch to shut down

iPhone won't shut down using power button? AssistiveTouch is an iPad feature that helps you use the Home button within the iPad through the screen. All you need to do is enable AssistiveTouch on your device. This can be accomplished by following the steps below.

The first step is to open your phone’s settings by clicking on the settings icon on the screen. Next, find the general options in the settings interface, which can be found by sliding down the screen. Then, find Accessibility in the general options and continue searching by swiping down the screen. Finally, find AssistiveTouch in Accessibility, an option that provides additional accessibility features.

Step 2: Open the solider of AssistiveTouch.

Step 3: You can also tell Siri to turn on AssistiveTouch. She will do your job.

Solution 5: Put iPad into Recovery Mode

It may be useful to put iPad into Recovery Mode. This is a tricky process. However, by following the steps below, you will be able to obtain it.

Step one: Connect your iPad to your computer and open iTunes.

Step 2: While your iPad is still connected to your computer, turn off the device and then press and hold the Home button.

Step 3: When you see the "Connect to iTunes" screen, move away from the Home button. Your device is in recovery mode. To exit this mode, you need to force restart your device. This can be done by pressing and holding the Home and Sleep buttons until the screen turns off and the Apple device appears again.

Solution 6: Reset all settings

You can also reset all settings of your device. This won't delete your device, but it will reset settings to default. All you need to do is follow the steps given below.

Step 1: Go to the Settings app and then go to General.

The second step is what you normally need to do is look for the reset option.

Step 3: In "Reset", click on the "Reset All Settings" option. Your work is done.

Solution 7. Fix iPad won’t shut down without data loss

If you are facing some important issues while using iOS devices like iPad If a black screen does not rotate, the screen freezes or crashes, you can consider using Tenorshare ReiBoot software to solve the problem. This software provides simple yet effective solutions to fix various iPad issues without losing any data. You just need to download and install the program on your computer and follow the troubleshooting steps.

Step 1: After connecting the device to the computer, run the software and click "Fix All iOS Stuck".

Step 2: Install the latest firmware package online. Click "Download" to start the package download process.

Step 3: After installing the software package, you need to select "Start Repair" to start the recovery process of your device. Once the process is completed, your device will reboot and the issue will be resolved.

Solution 8: Restore iPad from iTunes

Restore iPad using iTunes can also be used as a potential solution to the problem. All you need to do is follow the steps given below.

Step 1: Open iTunes and connect your device to your computer.

Step 2: Select the device shown in iTunes. Click on the "Restore iPad" option.

Step 3: This will restore the device making all data disappear.

If your iPad becomes unresponsive or shuts down, you just have to check out the best 8 solutions. Please tell us your feedback on this article in the comments below.

The above is the detailed content of How to solve the problem that iPad cannot be turned off. For more information, please follow other related articles on the PHP Chinese website!