Home >Computer Tutorials >Computer Knowledge >How to set up the keyboard boot function on a GIGABYTE motherboard (enable keyboard boot mode on GIGABYTE motherboard)
First of all, to support keyboard startup, it must be a PS2 keyboard! ! The setting steps are as follows:
Step 1: Press Del or F2 to enter the bios after booting, and go to the Advanced (advanced) mode of the bios
Ordinary motherboards enter the EZ (easy) mode of the motherboard by default. You need to press F7 switches to advanced mode. ROG series motherboards enter the advanced mode of bios by default (we use simplified Chinese to demonstrate)
Step 2: Select to - [Advanced] - [Advanced Power Management (APM)]
Step 3: Find the option [Wake up by PS2 keyboard]
Step 4: This option is Disabled by default. After pulling down, you can see three different setting options. You can press the [Spacebar] to turn on the computer, press the key combination [Ctrl Esc] to turn on the computer, and press the power button to turn on the computer. You can choose the boot method you need.
Solution:
1. First unplug all the live wires on the motherboard, including network cables and power cords , video cable.
2. Disconnect the battery from the motherboard, wait for 1 minute and then put it back. After this step, the USB mouse and keyboard or round mouse and keyboard can be used after powering on. If it still cannot be used, continue to use the following steps to solve the problem:
3. Find the CMOS clear jumper on the motherboard, next to it is marked "CLEAR CMOS", unplug the jumper cap, and use tweezers or copper Use a short circuit such as a wire to clear the CMOS.
4. Reinsert the jumper, turn on the computer, and the mouse and keyboard will light up.
The driver is missing.
The most direct way is to change the system to one that comes with its own mouse driver. If you don't want to change, you can only download and install the mouse driver. Specific method: Use the keyboard instead of the mouse to move (switch: left ALT left SHIFT NUM LOCK, movement key: right small keyboard 8
2 4 6 7 9
1 3, / is the left button, - means right-click, 5 means click, means double-click, 0 means drag and drop). If you can connect to the Internet, download the driver yourself. If you can't, just use a USB flash drive or memory card reader to transfer the driver elsewhere.
1.
First enter the BIOS, use the up, down, left and right keys on the keyboard to control the options, select the POWERMANAGEMENT main option, and select in the main option The first item controls whether to support incoming call activation. The default is off; ;
3.
After selecting, press and hold Enter, and it will be set to support incoming calls.
4.
You also need to set the startup time. The startup time is in the last item, and the default setting is not allowed (Disabled);
5.
Hold down the Enter key on the keyboard, select Enabled, and press Enter;
The Gigabyte motherboard is stuck in the logo interface and the keyboard cannot be used
This situation may be due to the computer self-testing Sometimes a certain piece of hardware cannot be detected or is stuck in detecting a piece of hardware.
2. Hard drive and optical drive, most likely hard drive and optical drive. For desktop computers, you need to open the case and unplug the power cord of the hard drive and optical drive to see if it passes the self-test. If it passes, further rule out the problem of the hard drive or the data cable.
3. If none of the above are true, then the most likely problem is that there is a problem with the motherboard bios and it needs to be returned to the factory for repair.
The above is the detailed content of How to set up the keyboard boot function on a GIGABYTE motherboard (enable keyboard boot mode on GIGABYTE motherboard). For more information, please follow other related articles on the PHP Chinese website!