Home  >  Article  >  Backend Development  >  Implement your own sha-256 hashing algorithm in PHP!

Implement your own sha-256 hashing algorithm in PHP!

藏色散人
藏色散人forward
2022-05-23 11:39:227342browse

Hash is also called "hash". It receives any set of input information of any length and transforms it into a fixed-length data fingerprint through the hash algorithm. The fingerprint is the hash value. Overall, a hash can be thought of as a message digest.

There is this function hash() in PHP, which can calculate the hash value of a string. Out of curiosity, I Googled the specific steps of hash calculation and wrote a set of calculation sha-256 using PHP. The code for the hash value. Of course, there are other hash algorithms besides sha-256, but currently sha-256 is more commonly used. The following is the hash algorithm currently released by the National Institute of Standards and Technology:

##sha-384< 2^128102464 38496sha-512< 2^128102464512128##sha-512/224##sha-512/256< 2 ^12810246425664
Hash algorithm Input size (bits) Block size (bits) Row size (bits) Generate binary length (bits) Generate hexadecimal length (chars)
sha1 < 2^64 512 32 160 40
sha-224 < 2^64 512 32 224 56
sha-256 < 2^64 512 32 256 64
< 2^128 1024 64 224 56
##

During the writing process, I mainly referred to the following documents and sites:

Lane Wagner - How SHA-256 Works Step-By-Step:https://blog.boot.dev/cryptography/how-sha-2-works-step-by-step-sha-256/
Secure Hash Standard (SHS) - FIPS 180-4(官方文档):https://csrc.nist.gov/publications/detail/fips/180/4/final
ASCII Table:https://www.asciitable.com/

This article has a lot of content and is mainly divided into the following parts. Readers can skip preparation two when reading: Assistant method directly Enter the step part. When you need to use the specified method in the step part, go back and check the functions in Preparation 2: Assistant Method.

  • Preparation 1: Code body

  • Preparation 2: Assistant method (you can skip it when reading)

  • Step 1: Convert string to binary

  • Step 2: Append the number 1

  • Step 3: Fill to a multiple of 512

  • Step 4: Append original length information

  • Step 5: Split blocks and fill to 2048 bits

  • Step 6: Block data modification

  • Step 7: Compression

##Preparation 1: Code body

We create a class Algorithm to store the methods and properties we need to calculate the hash. There is only one public method sha256() in this class. This method passes in a string parameter and outputs the sha-256 hash value of the string. To complete our hash calculation, we need to go through a total of seven steps. We first write the calls of these seven steps into the function body of sha256().

<?php 
declare(strict_types=1);
class Algorithm
{
    public function sha256(string $str): string
    {
        // 步骤一:将字符串转化为二进制
        $this->step1_convert_str_to_bits($str);
        // 步骤二:在最后面追加一个1
        $this->step2_append_1();
        // 步骤三:在数据末尾添加0,确保二进制的个数是512的倍数,最后预留64位用于存储原始长度信息
        $this->step3_extend_to_multiple_of_512();
        // 步骤四:把原始字符串位长度,填充到预留在最后的64位(8个字节的长整型)中
        $this->step4_append_origin_length();
        // 步骤五:每一个512位切分区块,在区块末尾填充0,使得每个区块位数为2048位,需要增加48行(32位一行)
        $this->step5_split_blocks_and_append_48_lines();
        // 步骤六:针对每一个2048位区块处理:以32位为一行,总共有64行,修改【16-63】行的数据
        $this->step6_modify_blocks_appended_48_lines();
        // 步骤七:压缩数据,生成最终的哈希值
        return $this->step7_compress_to_final_hash();
    }
}

In addition to the sha256() function, we need several member attributes to save the data generated during the calculation process.

$originLen attribute is used to record the original length of the string after it is converted into binary. This length value will be appended to the data later.

/** @var int 原始数据的二进制长度  */
private int $originLen = 0;

$bits attribute is used to store the binary data obtained after string conversion.

/** @var array 存储二进制数组 */
private array $bits;

$blocks stores binary data divided into blocks.

/** @var array 二进制区块 */
private array $blocks;

H The constants required for the hash meter, the 8 hash constants of hash-256 are the prime numbers 2, 3, 5, 7, 11, 13, 17, and 19. The square root of each is the first 32 binary decimal parts. position income.

/** @var array 质数平方根常量 */
private const H = [
    0x6a09e667, // 质数2的平方根取二进制小数部分前32位
    0xbb67ae85, // 质数3的平方根取二进制小数部分前32位
    0x3c6ef372, // 质数5的平方根取二进制小数部分前32位
    0xa54ff53a, // 质数7的平方根取二进制小数部分前32位
    0x510e527f, // 质数11的平方根取二进制小数部分前32位
    0x9b05688c, // 质数13的平方根取二进制小数部分前32位
    0x1f83d9ab, // 质数17的平方根取二进制小数部分前32位
    0x5be0cd19, // 质数19的平方根取二进制小数部分前32位
];

For the above constants, interested students can also calculate them by themselves. I only provide a simple calculation example here. Taking prime number 2 as an example, we first obtain its square root through a calculator: 1.4142135623730950488016887242097 Then only take the decimal part: 0.4142135623730950488016887242097, then convert this decimal decimal to binary, the conversion process is as follows:

小数转二进制
                            0.
0.4142135623730950488016887242097 x 2 => 0
0.8284271247461900976033774484194 x 2 => 1
0.6568542494923801952067548968388 x 2 => 1
0.3137084989847603904135097936776 x 2 => 0
0.6274169979695207808270195873552 x 2 => 1
0.2548339959390415616540391747104 x 2 => 0
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 1
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 0
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 0
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 0
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 0
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 0
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 1
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 0
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 0
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 1
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 1
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 1
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 1
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 0
0.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x 2 => 0
. . .

The binary part of the decimal part calculated above, take the first 32 digits: 011 01010 00001001 11100110 01100111, ext. It is expressed in hexadecimal: 0x6a09e667, and the calculation of several other prime numbers is similar. Of course, since it is a constant, the value is fixed, so we only need to know its calculation principle.

Similar to the square root constant above, the other 64 constants of hash-256 are the first 32 digits of the binary decimal part of the respective cube roots of the prime numbers 2, 3, 5, ..., 311.

/** @var array 质数立方根常量 */
private const K = [
    0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5, 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5,
    0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3, 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174,
    0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc, 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da,
    0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7, 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967,
    0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13, 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85,
    0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3, 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070,
    0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5, 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3,
    0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208, 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2,
];

Preparation 2: Assistant function

You can skip this part directly and start from step 1 below to calculate the hash value. When you need to use a certain assistant function Just search here again.

In the process of calculating hash, we store binary data into an array. Each element in the array corresponds to a binary bit, so if we want to perform AND and non-exclusion on these binary arrays, Or operations such as addition, we need to implement our own operation function.

Convert decimal integer to binary array.

/**
 * 十进制整数转化为二进制数组
 * @param int $num 十进制整数
 * @param int $fillTo 填充到多少位,不够的用0来补齐
 */
public function int2bits(int $num, int $fillTo = 0): array
{
    $bits = str_split(decbin($num));
    array_walk($bits, function (&$val) {
        $val = intval($val);
    });
    for ($len = count($bits); $len < $fillTo; $len++) {
        array_unshift($bits, 0);
    }
    return $bits;
}

Move the binary array to the right by the specified number of digits.

/**
 * 二进制数组向右移动
 * @param array $bits 二进制数组
 */
public function rightShift(array $bits, int $move): array
{
    $len = count($bits);
    $move = $move % $len;
    if ($move <= 0) return $bits;
    return array_merge(array_fill(0, $move, 0), array_slice($bits, 0, $len-$move));
}

The binary array is rotated to the right, which is similar to the right shift, but the number moved out must be inserted back to the head.

/**
 * 二进制数组向右旋转
 * @param array $bits 二进制数组
 */
public function rightRotate(array $bits, int $move): array
{
    $len = count($bits);
    $move = $move % $len;
    if ($move <= 0) return $bits;
    return array_merge(array_slice($bits, $len-$move, $move), array_slice($bits, 0, $len-$move));
}

Find the negation of a binary array.

/**
 * 二进制数组求非
 * @param array $bits 二进制数组
 */
public function not(array $bits): array
{
    for ($i = count($bits)-1; $i >= 0; $i--) {
        $bits[$i] = ($bits[$i] == 0) ? 1 : 0;
    }
    return $bits;
}

AND multiple binary arrays.

/**
 * 二进制数组求与
 * @param array $args 二进制数组
 */
public function and(array ...$args): array
{
    $argc = count($args);
    if ($argc == 0) return [];
    for ($i = 1; $i < $argc; $i++) {
        $j = count($args[0]) - 1;
        $k = count($args[$i]) - 1;
        while ($j >= 0 || $k >= 0) {
            $j < 0 and array_unshift($args[0], 0) and $j = 0; // 如果是$args[0]不够长就头插补齐
            ($args[$i][$k] ?? 0) == 0 and $args[0][$j] = 0;
            $j--;
            $k--;
        }
    }
    return $args[0];
}

XOR multiple binary arrays.

/**
 * 二进制数组求异或
 * @param array $args 二进制数组
 */
public function xor(array ...$args): array
{
    $argc = count($args);
    if ($argc == 0) return [];
    for ($i = 1; $i < $argc; $i++) {
        $j = count($args[0]) - 1;
        $k = count($args[$i]) - 1;
        while ($j >= 0 || $k >= 0) {
            $j < 0 and array_unshift($args[0], 0) and $j = 0; // 如果是$args[0]不够长就头插补齐
            $args[0][$j] = intval($args[0][$j] != ($args[$i][$k] ?? 0));
            $j--;
            $k--;
        }
    }
    return $args[0];
}

Add multiple binary arrays.

/**
 * 二进制数组相加
 * @param array $args 二进制数组
 */
public function add(array ...$args): array
{
    $argc = count($args);
    if ($argc == 0) return [];
    for ($i = 1; $i < $argc; $i++) {
        $carry = 0;
        $j = count($args[0]) - 1;
        $k = count($args[$i]) - 1;
        while ($j >= 0 || $k >= 0) {
            $j < 0 and array_unshift($args[0], 0) and $j = 0; // 如果是$args[0]不够长就头插补齐
            $carry += $args[0][$j] + ($args[$i][$k] ?? 0);
            switch ($carry) {
                case 1: $carry = 0; $args[0][$j] = 1; break;
                case 2: $carry = 1; $args[0][$j] = 0; break;
                case 3: $carry = 1; $args[0][$j] = 1; break;
            }
            $j--;
            $k--;
        }
        $carry == 1 and array_unshift($args[0], $carry); // 计算完后还有进位则加长存放
    }
    return array_slice($args[0], -32); // 计算结果只保留32位
}

Print binary array for debugging purposes. Every 8 bits will be filled with a space, every 32 bits will be filled with two spaces, every 64 bits will be changed to a new line, and every 512 bits will be a blank line to make printing data easier. Check.

/**
 * 打印二进制数组
 * @param array $bits 二进制数组
 */
public function printBits(array $bits): void
{
    $len = 0;
    foreach ($bits as $bit) {
        if ($len > 0) {
            if ($len % 512 == 0) echo PHP_EOL;
            if ($len % 64 == 0) {
                echo PHP_EOL;   
            } else {
                if ($len % 32 == 0) echo &#39; &#39;;
                if ($len % 8 == 0) echo &#39; &#39;;
            }
        }
        echo $bit;
        $len++;
    }
    echo PHP_EOL;
}

The binary array is converted to hexadecimal, which is used in the last step to convert the binary into a hash value string.

/**
 * 二进制数组转化为十六进制
 * @param array $bits 二进制数组
 */
public function bits2hex(array $bits): string
{
    $str = &#39;&#39;;
    for ($i = count($bits)-1; $i >= 0; $i -= 4) {
        $dec = $bits[$i] + ($bits[$i-1] ?? 0)*2 + ($bits[$i-2] ?? 0)*4 + ($bits[$i-3] ?? 0)*8;
        switch ($dec) {
            case 0:  $str = &#39;0&#39; . $str; break;
            case 1:  $str = &#39;1&#39; . $str; break;
            case 2:  $str = &#39;2&#39; . $str; break;
            case 3:  $str = &#39;3&#39; . $str; break;
            case 4:  $str = &#39;4&#39; . $str; break;
            case 5:  $str = &#39;5&#39; . $str; break;
            case 6:  $str = &#39;6&#39; . $str; break;
            case 7:  $str = &#39;7&#39; . $str; break;
            case 8:  $str = &#39;8&#39; . $str; break;
            case 9:  $str = &#39;9&#39; . $str; break;
            case 10: $str = &#39;a&#39; . $str; break;
            case 11: $str = &#39;b&#39; . $str; break;
            case 12: $str = &#39;c&#39; . $str; break;
            case 13: $str = &#39;d&#39; . $str; break;
            case 14: $str = &#39;e&#39; . $str; break;
            case 15: $str = &#39;f&#39; . $str; break;
        }
    }
    return $str;
}

Step 1: Convert string to binary

Here we use the "hello world" string to demonstrate the entire hash calculation process. We can first use PHP's built-in hash function to calculate the result. The hash value of "hello world" is "b94d27b9934d3e08a52e52d7da7dabfac484efe37a5380ee9088f7ace2efcde9". If the hash value we calculated in the end is equal to this value, our calculation logic is correct. .

First we split "hello world" into characters. Each character has a corresponding ASCII code value. These ASCII code values ​​are all integers from 0-256. You can use PHP's ord() function to convert these characters into integers, then convert these integers into the corresponding binary and store them in the attribute $bits. And save the length value of $bits at this time to the $originLen attribute.

The data after converting "hello world" to binary is:

“hello world”
01101000 01100101 01101100 01101100  01101111 00100000 01110111 01101111
01110010 01101100 01100100
/**
 * 步骤一:将字符串转化为二进制
 * @param string $str 原始字符串
 */
public function step1_convert_str_to_bits(string $str): void
{
    $this->bits = [];
    $chars = str_split($str);
    foreach ($chars as $char) {
        $this->bits = array_merge($this->bits, $this->int2bits(ord($char), 8));
    }
    $this->originLen = count($this->bits);
}

Step 2: Append the number 1

Then add it at the end of the binary array A 1.

$bits
01101000 01100101 01101100 01101100  01101111 00100000 01110111 01101111
01110010 01101100 01100100 1
/**
 * 步骤二:在最后面追加一个1
 */
public function step2_append_1(): void
{
    $this->bits[] = 1;
}

Step 3: Fill to multiples of 512

在二进制数组的末尾添加 0 以使得整个二进制数组的个数刚好是 512 的倍数。需要注意的是,二进制数组的最末尾要预留 64 位用于存放原始二进制的长度。也就是一开始将字符串转换成二进制时的长度,我们在 步骤一 中将这个长度值保存到了 $originLen 属性里。

$bits
01101000 01100101 01101100 01101100  01101111 00100000 01110111 01101111
01110010 01101100 01100100 10000000  00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000  00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000  00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000  00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000  00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000  00000000 00000000 00000000 00000000
[    预留 64 位用于存储原始字符串的长度    ]
/**
 * 步骤三:在数据末尾添加0,确保二进制的个数是512的倍数,最后预留64位用于存储原始长度信息
 */
public function step3_extend_to_multiple_of_512(): void
{
    $rem = (count($this->bits) + 64) % 512;
    if ($rem > 0) {
        while ($rem < 512) {
            $this->bits[] = 0;
            $rem++;
        }
    }
}

步骤四:追加原始长度信息

把之前记录的原始数据长度 $originLen 转换为 64 位的二进制追加到 $bits 末尾。

$bits
01101000 01100101 01101100 01101100  01101111 00100000 01110111 01101111
01110010 01101100 01100100 10000000  00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000  00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000  00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000  00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000  00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000  00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000  00000000 00000000 00000000 01011000
/**
 * 步骤四:把原始字符串位长度,填充到预留在最后的64位(8个字节的长整型)中
 */
public function step4_append_origin_length(): void
{
    $this->bits = array_merge($this->bits, $this->int2bits($this->originLen, 64));
}

步骤五:切分区块并填充至 2048 位

经过 步骤四 之后,$bits 二进制数组的个数已经是 512 的倍数,现在以每 512 位分为一个区块,然后在每个区块末尾填充 0,让每个区块的大小变成 2048 位。每个区块的 2048 位数据以 32 位作为一行,那么就有 64 行。由于 "hello world" 数据比较短,我们就只有一个区块。

- $blocks[0] $blocks[0] -
0
2
4
6
8
10
12
14

16
18
20
22
24
26
28
30

32
34
36
38
40
42
44
46

48
50
52
54
56
58
60
62
01101000 01100101 01101100 01101100
01110010 01101100 01100100 10000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000

00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000

00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000

00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
01101111 00100000 01110111 01101111
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 01011000

00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000

00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000

00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
1
3
5
7
9
11
13
15

17
19
21
23
25
27
29
31

33
35
37
39
41
43
45
47

49
51
53
55
57
59
61
63
/**
 * 步骤五:每一个512位切分区块,在区块末尾填充0,使得每个区块位数为2048位,经计算
 * 每个区块还需要添加48x32个0
 */
public function step5_split_blocks_and_append_48_lines(): void
{
    $this->blocks = [];
    $append = $this->int2bits(0, 48 * 32);
    $len = count($this->bits);
    for ($i = 0; $i < $len; $i += 512) {
        $this->blocks[] = array_merge(array_slice($this->bits, $i, 512), $append);
    }
}

步骤六:区块数据修改

上一步中我们给每一个区块末尾添加了很多 0,在这一步中,通过一些位操作将这些数据进一步调整。按 32 位为一行,我们需要修改新增加的 16-63 行的数据。修改的逻辑如下:

算法逻辑

For i from w[16…63]:
    s0 = (w[i-15] rightrotate 7) xor (w[i-15] rightrotate 18) xor (w[i-15] rightshift 3)
    s1 = (w[i-2] rightrotate 17) xor (w[i- 2] rightrotate 19) xor (w[i- 2] rightshift 10)
    w[i] = w[i-16] + s0 + w[i-7] + s1

其中 w 是每个区块的行数组,w[i] 就是第 i 行。

rightshift 是右移,rightrotate 是旋转右移, xor 是异或。

这里以第 16 行的处理为例:

算法详解

i = 16
(w[1] rightrotate 7) = 01101111001000000111011101101111 -> 11011110110111100100000011101110
(w[1] rightrotate 18) = 01101111001000000111011101101111 -> 00011101110110111101101111001000
(w[1] rightshift 3) = 01101111001000000111011101101111 -> 00001101111001000000111011101101
s0 = (w[1] rightrotate 7) xor (w[1] rightrotate 18) xor (w[1] rightshift 3)
 = 11001110111000011001010111001011
(w[14] rightrotate 17) = 00000000000000000000000000000000 -> 00000000000000000000000000000000
(w[14] rightrotate 19) = 00000000000000000000000000000000 -> 00000000000000000000000000000000
(w[14] rightshift 10) = 00000000000000000000000000000000 -> 00000000000000000000000000000000
s1 = (w[14] rightrotate 17) xor (w[14] rightrotate 19) xor (w[14] rightshift 10)
= 00000000000000000000000000000000
w[i] = w[0] + s0 + w[9] + s1
= 00110111010001110000001000110111(相加得到的值如果超过 32 位,则抹去高位)
/**
 * 步骤六:针对每一个2048位区块处理:以32位为一行,总共有64行,修改【16-63】行的数据,
 * 这【16-63】行就是上一步新增的48x32个0
 */
public function step6_modify_blocks_appended_48_lines(): void
{
    foreach ($this->blocks as &$block) {
        for ($i = 16; $i < 64; $i++) {
            $w0 = array_slice($block, ($i-16)*32, 32);
            $w1 = array_slice($block, ($i-15)*32, 32);
            $w9 = array_slice($block, ($i-7)*32, 32);
            $w14 = array_slice($block, ($i-2)*32, 32);
            $s0 = $this->xor(                
                $this->rightRotate($w1, 7),
                $this->rightRotate($w1, 18),
                $this->rightShift($w1, 3)
            );
            $s1 = $this->xor(
                $this->rightRotate($w14, 17),
                $this->rightRotate($w14, 19),
                $this->rightShift($w14, 10)
            );
            $wi = $this->add($w0, $s0, $w9, $s1);
            // 如果$wi的长度超过了32位,则只取32位,舍弃高位
            $k = count($wi) - 1;
            for ($j = $i * 32 + 31; $j >= $i * 32; $j--) {
                $block[$j] = $wi[$k] ?? 0;
                $k--;
            }
        }
    }
}

步骤七:压缩

新建变量 $a、$b、$c、$d、$e、$f、$g、$h 值依次分别等于哈希常量 H[0-7],接着循环每一个区块的每一行,通过 与 非 异或 等操作将信息压缩到 $a、$b、$c、$d、$e、$f、$g、$h 中,最后将 $a、$b、$c、$d、$e、$f、$g、$h 的值与原始常量 H[0-7] 相加,拼接相加后的二进制结果 h0~h7 并转化为十六进制字符串得到最终的哈希值。

具体的压缩算法如下:

算法逻辑

For i from 0 to 63
    s1 = (e rightrotate 6) xor (e rightrotate 11) xor (e rightrotate 25)
    ch = (e and f) xor ((not e) and g)
    temp1 = h + s1 + ch + k[i] + w[i]
    s0 = (a rightrotate 2) xor (a rightrotate 13) xor (a rightrotate 22)
    maj = (a and b) xor (a and c) xor (b and c)
    temp2 := s0 + maj
    h = g
    g = f
    f = e
    e = d + temp1
    d = c
    c = b
    b = a
    a = temp1 + temp2

这里以第 0 行的处理为例,列出了变量计算结果方便大家对照调试:

计算结果

i = 0
s1 = 00110101100001110010011100101011
ch = 00011111100001011100100110001100
temp1 = 01011011110111010101100111010100
s0 = 11001110001000001011010001111110
maj = 00111010011011111110011001100111
temp2 = 00001000100100001001101011100101
h = 00011111100000111101100110101011
g = 10011011000001010110100010001100
f = 01010001000011100101001001111111
e = 00000001001011010100111100001110
d = 00111100011011101111001101110010
c = 10111011011001111010111010000101
b = 01101010000010011110011001100111
a = 01100100011011011111010010111001
/**
 * 步骤七:压缩数据
 */
public function step7_compress_to_final_hash(): string
{
    $a = $h0 = $this->int2bits(static::H[0], 32);
    $b = $h1 = $this->int2bits(static::H[1], 32);
    $c = $h2 = $this->int2bits(static::H[2], 32);
    $d = $h3 = $this->int2bits(static::H[3], 32);
    $e = $h4 = $this->int2bits(static::H[4], 32);
    $f = $h5 = $this->int2bits(static::H[5], 32);
    $g = $h6 = $this->int2bits(static::H[6], 32);
    $h = $h7 = $this->int2bits(static::H[7], 32);
    foreach ($this->blocks as $block) {
        for ($i = 0; $i < 64; $i++) {
            $s1 = $this->xor(
                $this->rightRotate($e, 6),
                $this->rightRotate($e, 11),
                $this->rightRotate($e, 25)
            );
            $ch = $this->xor(
                $this->and($e, $f),
                $this->and($this->not($e), $g)
            );
            $ki = $this->int2bits(static::K[$i], 32);
            $wi = array_slice($block, $i*32, 32);
            $temp1 = $this->add($h, $s1, $ch, $ki, $wi);
            $s0 = $this->xor(
                $this->rightRotate($a, 2),
                $this->rightRotate($a, 13),
                $this->rightRotate($a, 22),
            );
            $maj = $this->xor(
                $this->and($a, $b),
                $this->and($a, $c),
                $this->and($b, $c)
            );
            $temp2 = $this->add($s0, $maj);
            $h = $g;
            $g = $f;
            $f = $e;
            $e = $this->add($d, $temp1);
            $d = $c;
            $c = $b;
            $b = $a;
            $a = $this->add($temp1, $temp2);
        }
    }
    $h0 = $this->add($h0, $a);
    $h1 = $this->add($h1, $b);
    $h2 = $this->add($h2, $c);
    $h3 = $this->add($h3, $d);
    $h4 = $this->add($h4, $e);
    $h5 = $this->add($h5, $f);
    $h6 = $this->add($h6, $g);
    $h7 = $this->add($h7, $h);
    return $this->bits2hex(array_merge($h0, $h1, $h2, $h3, $h4, $h5, $h6, $h7));
}

至此整个哈希 sha-256 计算流程就完成了, 计算得到的哈希值也与 PHP 自带的 hash() 函数计算结果一致。

The above is the detailed content of Implement your own sha-256 hashing algorithm in PHP!. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:learnku.com. If there is any infringement, please contact admin@php.cn delete