search
HomeBackend DevelopmentPHP TutorialPHP simple socket server client code example_PHP tutorial

This article mainly introduces the example of PHP simple socket server client code. This article gives two versions of the server port, explains the problems and improvements of the code, and gives the client using this socket server. Code, friends who need it can refer to

This article shares a simple socket example, using php. Implement a TCP service that receives an input string, processes and returns this string to the client.

Generate a socket server

<?php
/*文件名:socket_server.php*/
// 设置一些基本的变量
$host="127.0.0.1";//Socket运行的服务器的IP地址
$port=1234;//Socket运行的服务器的端口,端口取值为1到65535之间的数字,前提是这个端口未被使用
// 设置超时时间,这里设置为永不超时,确保PHP在等待客户端连接时不会超时。
set_time_limit(0);
// 创建一个Socket,返回一个Socket句柄
$socket=socket_create(AF_INET,SOCK_STREAM,0) or die("Could not create socket\n");
//绑定Socket到指定的地址和端口
$result=socket_bind($socket,$host,$port) or die("Could not bind to socket\n");
// 开始监听外部连接
$result=socket_listen($socket,3) or die("Could not set up socket listener\n");
/******到这里,服务器除了等待来自客户端的连接请求外基本上什么也不做******/
// 另一个Socket来处理服务端与客户端的通信
$spawn=socket_accept($socket) or die("Could not accept incoming connection\n");
// 读取客户端的输入,当一个连接被建立后,服务器就会等待客户端发送一些输入信息,这些信息可以由socket_read()函数来获得,并把它赋值给PHP的$input变量
$input=socket_read($spawn,1024) or die("Could not read input\n");
//socker_read的第二个参数用以指定读入的字节数,你可以通过它来限制从客户端获取数据的大小
// 下面这不就不解释了,不知道的自己面壁去
$input=trim($input);
//处理客户端输入并返回结果,当客户端发来数据信息后,信息输出就要靠socket_write()函数来完成
$output=strrev($input) ."\n";//反转字符串,这里仅仅是为了更好的区分两条信息
socket_write($spawn,$output,strlen($output)) or die("Could not write output\n");
// 关闭sockets
socket_close($spawn);
socket_close($socket);

Tip: You should use your command prompt to run the above code. The reason is because a server will be generated here, not a Web page. If you try to run this script using a web browser, there's a good chance it will exceed the 30 second limit. You can use the code below to set an infinite run time, but it is recommended to use the command prompt to run.

The code is as follows:

set_time_limit(0);

Simply test this script in your command prompt:

The code is as follows:

Php.exe socket_server.php


If you do not set the path of the php interpreter in the system environment variable, then you will need to specify the detailed path to php.exe. When you run the server, you can test the server by connecting to port 1337 via telnet.

There are three problems with the server side above:

1. It cannot accept multiple connections.

2. It only completes one command.

3. You cannot connect to this server through a web browser.

This first problem is easier to solve, you can use an application to connect to the server every time. But the next problem is that you need to use a Web page to connect to the server, which is more difficult. You can have your server accept the connection, write some data to the client (if it must write it), close the connection and wait for the next connection.

Improve on the previous code and generate the following code to make your new server:

<?php
$commonProtocol = getprotobyname("tcp");
$socket = socket_create(AF_INET, SOCK_STREAM, $commonProtocol);
socket_bind($socket, &#39;localhost&#39;, 1337); //socket_bind() 把socket绑定在一个IP地址和端口上
socket_listen($socket);
$buffer = "NO DATA";
while(true) {
 // Accept any connections coming in on this socket
 $connection = socket_accept($socket);//socket_accept() 接受一个Socket连接
 printf("Socket connected\r\n");
 // Check to see if there is anything in the buffer
 if($buffer != ""){
 printf("Something is in the buffer...sending data...\r\n");
 socket_write($connection, $buffer . "\r\n"); //socket_write() 写数据到socket缓存
 printf("Wrote to socket\r\n");
 }else {
 printf("No Data in the buffer\r\n");
 }
 // Get the input
 while($data = socket_read($connection, 1024, PHP_NORMAL_READ)){//socket_read() 读取指定长度的数据
 $buffer = $data;
 socket_write($connection, "Information Received\r\n");
 printf("Buffer: " . $buffer . "\r\n");
 }
 socket_close($connection); //socket_close() 关闭一个socket资源
 printf("Closed the socket\r\n\r\n");
}


What should this server do? It initializes a socket and opens a cache to send and receive data. It waits for a connection and once a connection is made it prints "Socket connected" on the screen on the server side. This server checks the buffer and if there is data in the buffer, it sends the data to the connected computer. Then it sends an acceptance message for this data. Once it accepts the message, it saves the message to the data, makes the connected computer aware of the message, and finally closes the connection. When the connection is closed, the server starts processing the next connection.

Spawning a socket client

Handling the second problem is easy. You need to generate a php page, connect to a socket, send some data to its cache and process it. Then you have the processed data waiting, and you can send your data to the server. On another client connection, it will process that data.

The following example demonstrates the use of sockets:

<?php
// Create the socket and connect
$socket = socket_create(AF_INET, SOCK_STREAM, SOL_TCP);
$connection = socket_connect($socket,&#39;localhost&#39;, 1337);
while($buffer = socket_read($socket, 1024, PHP_NORMAL_READ)) {
 if($buffer == "NO DATA") {
 echo("<p>NO DATA</p>");
 break;
 }else{
 // Do something with the data in the buffer
 echo("<p>Buffer Data: " . $buffer . "</p>");
 }
}
echo("<p>Writing to Socket</p>");
// Write some test data to our socket
if(!socket_write($socket, "SOME DATA\r\n")){
 echo("<p>Write failed</p>");
}
// Read any response from the socket phpernote.com
while($buffer = socket_read($socket, 1024, PHP_NORMAL_READ)){
 echo("<p>Data sent was: SOME DATA<br> Response was:" . $buffer . "</p>");
}
echo("<p>Done Reading from Socket</p>");

The code in this example demonstrates the client connecting to the server. The client reads the data. If this is the first connection to arrive in this cycle, the server will send "NO DATA" back to the client. If this happens, the client is on top of the connection. The client sends its data to the server, the data is sent to the server, and the client waits for a response. Once the response is received, it writes the response to the screen.


Statement
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
What are some common problems that can cause PHP sessions to fail?What are some common problems that can cause PHP sessions to fail?Apr 25, 2025 am 12:16 AM

Reasons for PHPSession failure include configuration errors, cookie issues, and session expiration. 1. Configuration error: Check and set the correct session.save_path. 2.Cookie problem: Make sure the cookie is set correctly. 3.Session expires: Adjust session.gc_maxlifetime value to extend session time.

How do you debug session-related issues in PHP?How do you debug session-related issues in PHP?Apr 25, 2025 am 12:12 AM

Methods to debug session problems in PHP include: 1. Check whether the session is started correctly; 2. Verify the delivery of the session ID; 3. Check the storage and reading of session data; 4. Check the server configuration. By outputting session ID and data, viewing session file content, etc., you can effectively diagnose and solve session-related problems.

What happens if session_start() is called multiple times?What happens if session_start() is called multiple times?Apr 25, 2025 am 12:06 AM

Multiple calls to session_start() will result in warning messages and possible data overwrites. 1) PHP will issue a warning, prompting that the session has been started. 2) It may cause unexpected overwriting of session data. 3) Use session_status() to check the session status to avoid repeated calls.

How do you configure the session lifetime in PHP?How do you configure the session lifetime in PHP?Apr 25, 2025 am 12:05 AM

Configuring the session lifecycle in PHP can be achieved by setting session.gc_maxlifetime and session.cookie_lifetime. 1) session.gc_maxlifetime controls the survival time of server-side session data, 2) session.cookie_lifetime controls the life cycle of client cookies. When set to 0, the cookie expires when the browser is closed.

What are the advantages of using a database to store sessions?What are the advantages of using a database to store sessions?Apr 24, 2025 am 12:16 AM

The main advantages of using database storage sessions include persistence, scalability, and security. 1. Persistence: Even if the server restarts, the session data can remain unchanged. 2. Scalability: Applicable to distributed systems, ensuring that session data is synchronized between multiple servers. 3. Security: The database provides encrypted storage to protect sensitive information.

How do you implement custom session handling in PHP?How do you implement custom session handling in PHP?Apr 24, 2025 am 12:16 AM

Implementing custom session processing in PHP can be done by implementing the SessionHandlerInterface interface. The specific steps include: 1) Creating a class that implements SessionHandlerInterface, such as CustomSessionHandler; 2) Rewriting methods in the interface (such as open, close, read, write, destroy, gc) to define the life cycle and storage method of session data; 3) Register a custom session processor in a PHP script and start the session. This allows data to be stored in media such as MySQL and Redis to improve performance, security and scalability.

What is a session ID?What is a session ID?Apr 24, 2025 am 12:13 AM

SessionID is a mechanism used in web applications to track user session status. 1. It is a randomly generated string used to maintain user's identity information during multiple interactions between the user and the server. 2. The server generates and sends it to the client through cookies or URL parameters to help identify and associate these requests in multiple requests of the user. 3. Generation usually uses random algorithms to ensure uniqueness and unpredictability. 4. In actual development, in-memory databases such as Redis can be used to store session data to improve performance and security.

How do you handle sessions in a stateless environment (e.g., API)?How do you handle sessions in a stateless environment (e.g., API)?Apr 24, 2025 am 12:12 AM

Managing sessions in stateless environments such as APIs can be achieved by using JWT or cookies. 1. JWT is suitable for statelessness and scalability, but it is large in size when it comes to big data. 2.Cookies are more traditional and easy to implement, but they need to be configured with caution to ensure security.

See all articles

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

Video Face Swap

Video Face Swap

Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Tools

SecLists

SecLists

SecLists is the ultimate security tester's companion. It is a collection of various types of lists that are frequently used during security assessments, all in one place. SecLists helps make security testing more efficient and productive by conveniently providing all the lists a security tester might need. List types include usernames, passwords, URLs, fuzzing payloads, sensitive data patterns, web shells, and more. The tester can simply pull this repository onto a new test machine and he will have access to every type of list he needs.

Dreamweaver CS6

Dreamweaver CS6

Visual web development tools

SAP NetWeaver Server Adapter for Eclipse

SAP NetWeaver Server Adapter for Eclipse

Integrate Eclipse with SAP NetWeaver application server.

SublimeText3 Linux new version

SublimeText3 Linux new version

SublimeText3 Linux latest version

SublimeText3 Mac version

SublimeText3 Mac version

God-level code editing software (SublimeText3)