©
本文档使用
php.cn手册 发布
This appendix is normative.
This appendix provides an introduction to the SVG DOM and discusses the relationship of the SVG DOM with the Document Object Model (DOM) Level 2 Core Specification [DOM2]. The specific SVG DOM interfaces that correspond to particular sections of the SVG specification are defined at the end of corresponding chapters in this specification, as follows:
The SVG DOM builds upon and is compatible with DOM Level 2. In particular:
A DOM application can use the hasFeature method of the DOMImplementation interface to verify that the interfaces listed in this section are supported. The list of available interfaces is provided in section Feature strings for the hasFeature method call.
All SVG DOM objects that directly correspond to an attribute, e.g. the SVGAnimatedLength ry in an SVGRectElement, are live. This means that any changes made to the attribute are immediately reflected in the corresponding SVG DOM object.
The SVG DOM allows attributes to be accessed even though they haven't been specified explicitly in the document markup. When this happens an appropriate object is created, initialized and returned. This newly constructed object does not affect rendering until it is modified for the first time. After the first modification the object becomes live, such that any modifications made to the corresponding attribute are immediately reflected in the object.
For example, if rectElement.x.baseVal
is accessed
and the ‘x’ attribute was not specified in the document, the
returned SVG DOM object would represent the value 0 user units.
For cases where an attribute has a default value the returned SVG DOM object that must reflect that value, and for all other cases the object is initialized as described below. If a particular SVG DOM interface is not listed below that means that the object initialization shall be done using the values for the objects that the interface contains, e.g DOMString in the case of SVGAnimatedString, or four floats in the case of SVGRect.
Every Element object that corresponds to an SVG element (that is, an element with namespace URI "http://www.w3.org/2000/svg" and a local name that is one of the elements defined in this specification) must also implement the DOM interface identified in element definition. For example, in The ‘rect’ element, the SVGRectElement interface is identified. This means that every Element object whose namespace URI is "http://www.w3.org/2000/svg" and whose local name is "rect" must also implement SVGRectElement.
The SVG DOM follows similar naming conventions to the Document Object Model HTML ([DOM1], chapter 2).
All names are defined as one or more English words concatenated together to form a single string. Property or method names start with the initial keyword in lowercase, and each subsequent word starts with a capital letter. For example, a property that returns document meta information such as the date the file was created might be named "fileDateCreated". In the ECMAScript binding, properties are exposed as properties of a given object. In Java, properties are exposed with get and set methods.
For attributes with the CDATA data type, the case of the return value is that given in the source document.
exception SVGException { unsigned short code; }; // SVGException code const unsigned short SVG_WRONG_TYPE_ERR = 0; const unsigned short SVG_INVALID_VALUE_ERR = 1; const unsigned short SVG_MATRIX_NOT_INVERTABLE = 2;
Raised when an object of the wrong type is passed to an operation.
Note that no operation is defined to raise an SVGException with this code in SVG 1.1 Second Edition. The constant remains defined here for consistency with SVG 1.1 First Edition.
Raised when an attempt is made to invert a matrix that is not invertible.
Note the unusual spelling of this constant, which is necessary for compatibility with existing content.
The feature strings that are available for the hasFeature method call that is part of the SVG DOM's support for the DOMImplementation interface defined in DOM Level 2 Core [DOM2] are the same features strings available for the ‘requiredFeatures’ attribute that is available for many SVG elements.
For all features that correspond to the SVG language and are documented in this specification (see appendix Feature Strings for a list of features in the SVG language), the version number for the hasFeature method call is "1.1". For features that correspond to other languages, refer to the relevant other specifications to determine the appropriate version number for the given feature.
The SVG DOM supports all of the interfaces defined in, and the following event types from, DOM Level 2 Events [DOM2EVENTS]:
While event listeners can be registered using an
addEventListener
call on any element in the DOM,
the use of event attributes
on elements where those attributes are disallowed will not result in their
being invoked if the relevant event is dispatched to the element.
For example, if the ‘onclick’ attribute were specified on
a ‘title’ element, its contents would never be run in
response to a click event:
<svg xmlns="http://www.w3.org/2000/svg"> <title onclick="alert('Hello')">Invalid event attribute</title> <script> // Find the 'title' element. var title = document.getElementsByTagNameNS("http://www.w3.org/2000/svg", "title")[0]; // Create and initialize a 'click' event. var event = document.createEvent("MouseEvent"); event.initMouseEvent("click", true, false, this, 1, 0, 0, 0, 0, false, false, false, false, 0, null); // Dispatch the event to the 'title' element. Since onclick="" is not // allowed on 'title', the alert will not show. title.dispatchEvent(event); </script> </svg>
See the Attribute Index for details on which elements a given event attribute is allowed to be specified on.
Implementors may view the setting of event attributes as the
creation and registration of an EventListener on the
EventTarget. Such event listeners are invoked only for
the "bubbling" and "at target" phases, as if false were specified
for the useCapture
argument to addEventListener
.
This EventListener behaves in the same manner as any other
which may be registered on the EventTarget.
If the attribute representing the event listener is changed, this may be viewed as the removal of the previously registered EventListener and the registration of a new one. Futhermore, no specification is made as to the order in which event attributes will receive the event with regards to the other EventListeners on the EventTarget.
In Java, one way that event listeners can be established is to define a class which implements the EventListener interface, such as:
1 2 3 4 5 6 7 8 |
|
In ECMAScript, one way to establish an event listener is to
define a function and pass that function to the addEventListener
method:
1 2 3 4 5 |
|
In ECMAScript, the character data content of an event attribute becomes the definition of the ECMAScript function which gets invoked in response to the event. As with all registered ECMAScript event listener functions, this function receives an Event object as a parameter, and the name of the Event object is evt. For example, it is possible to write:
1 |
|
which will pass the Event object evt into
function MyActivateHandler
.
The section describes the facilities from DOM Level 2 CSS ([DOM2STYLE], chapter 2) that are part of the SVG DOM.
User agents that do not support styling with CSS are only required to support the following interfaces from DOM Level 2 CSS ([DOM2STYLE], chapter 2), along with any interfaces necessary to implement the interfaces, such as CSSPrimitiveValue and CSSValueList. These interfaces are used in conjunction with the getPresentationAttribute method call on interface SVGStylable, which must be supported on all implementations of the SVG DOM.
User agents that support Styling with CSS, the SVG DOM, and aural styling ([CSS2], chapter 19) must support all of the interfaces defined in DOM Level 2 CSS ([DOM2STYLE], chapter 2) which apply to aural properties.
For visual media ([CSS2], section 7.3.1), user agents must support all of the required interfaces defined in DOM Level 2 CSS. All of the interfaces that are optional for DOM Level 2 CSS are also optional for user agents implementing the SVG DOM.
Note: the getPresentationAttribute method and the interfaces that extend CSSValue are deprecated, and may be dropped from future versions of the SVG specification.
Whether or not a user agent supports styling with CSS, a user agent still must support interface CSSValue, as this is the type that is returned from the getPresentationAttribute method call on interface SVGStylable.
DOM Level 2 CSS defines a set of extended interfaces ([DOM2STYLE], section 2.3) for use in conjunction with interface CSSValue. The table below specifies the type of CSSValue used to represent each SVG property that applies to visual media ([CSS2], section 7.3.1). The expectation is that the CSSValue returned from the getPropertyCSSValue method on the CSSStyleDeclaration interface or the getPresentationAttribute method on the SVGStylable interface can be cast down, using binding-specific casting methods, to the specific derived interface.
For properties that are represented by a custom interface (the cssValueType of the CSSValue is CSS_CUSTOM), the name of the derived interface is specified in the table. For these properties, the table below indicates which extended interfaces are mandatory and which are not.
For properties that consist of lists of values (the cssValueType of the CSSValue is CSS_VALUE_LIST), the derived interface is CSSValueList. For all other properties (the cssValueType of the CSSValue is CSS_PRIMITIVE_VALUE), the derived interface is CSSPrimitiveValue.
For shorthand properties, a CSSValue always will have a value of null. Shorthand property values can only be accessed and modified as strings.
The SVG DOM defines the following SVG-specific custom property interfaces, all of which are mandatory for SVG user agents:
Property Name | Representation | Mandatory? (Extended interfaces only) |
---|---|---|
‘alignment-baseline’ | ident | |
‘baseline-shift’ | ident, length, percentage | |
‘clip’ | rect, ident | |
‘clip-path’ | uri, ident | |
‘clip-rule’ | ident | |
‘color’ | rgbcolor, ident | |
‘color-interpolation’ | ident | |
‘color-profile’ | list of strings, uri's and idents | |
‘color-rendering’ | ident | |
‘cursor’ | uri, ident | no |
‘direction’ | ident | |
‘display’ | ident | |
‘dominant-baseline’ | ident | |
‘enable-background’ | list of idents and numbers | |
‘fill’ | SVGPaint | yes |
‘fill-opacity’ | number | |
‘fill-rule’ | ident | |
‘filter’ | uri, ident | |
‘flood-color’ | SVGColor | yes |
‘flood-opacity’ | number | |
‘font’ | null | |
‘font-family’ | list of strings and idents | |
‘font-size’ | ident, length, percentage | |
‘font-size-adjust’ | number, ident | |
‘font-stretch’ | ident | |
‘font-style’ | ident | |
‘font-variant’ | ident | |
‘font-weight’ | ident | |
‘glyph-orientation-horizontal’ | ident | |
‘glyph-orientation-vertical’ | ident | |
‘image-rendering’ | ident | |
‘kerning’ | ident, length | |
‘letter-spacing’ | ident, length | |
‘lighting-color’ | SVGColor | yes |
‘marker’ | null | |
‘marker-end’ | uri, ident | |
‘marker-mid’ | uri, ident | |
‘marker-start’ | uri, ident | |
‘mask’ | uri, ident | |
‘opacity’ | number | |
‘overflow’ | ident | |
‘pointer-events’ | ident | |
‘shape-rendering’ | ident | |
‘stop-color’ | SVGColor | yes |
‘stop-opacity’ | number | |
‘stroke’ | SVGPaint | yes |
‘stroke-dasharray’ | ident or list of lengths | |
‘stroke-dashoffset’ | length | |
‘stroke-linecap’ | ident | |
‘stroke-linejoin’ | ident | |
‘stroke-miterlimit’ | length | |
‘stroke-opacity’ | number | |
‘stroke-width’ | length | |
‘text-anchor’ | ident | |
‘text-decoration’ | list of ident | |
‘text-rendering’ | ident | |
‘unicode-bidi’ | ident | |
‘visibility’ | ident | |
‘word-spacing’ | length, ident | |
‘writing-mode’ | ident |
Some operations and attributes in the SVG DOM are defined to raise an
exception when an attempt is made to modify a node in the DOM that
is read only. Such read only nodes are not related to attributes declared
in IDL with the readonly
keyword. Rather, they are nodes
that cannot be modified by virtue of being defined as
readonly nodes
by DOM Level 2 Core
([DOM2], Glossary appendix).
Specifically, Entity
and EntityReference
nodes and their descendants are read only ([DOM2], section 1.3).
If a script sets a DOM attribute to an invalid value (e.g., a negative number for an attribute that requires a non-negative number or an out-of-range value for an enumeration), unless this specification indicates otherwise, no exception shall be raised on setting, but the given document fragment shall become technically in error as described in Error processing.