What should I do if my graphics card is blackened by flashing the BIOS?

Flashing the BIOS of the graphics card refers to the situation where an error occurs when modifying the BIOS, causing the graphics card to fail to start. Solutions include: 1. Power-off method: release the remaining power and then restart; 2. Short-circuit method: short-circuit the short-circuit point on the PCB; 3. Restore the BIOS to default values; 4. Use third-party tools to refresh the BIOS; 5. Contact technology Support seeking help. Be careful to back up the original BIOS, use a compatible version, and proceed with caution to avoid damage.

What should I do if I refresh the BIOS of the graphics card?

Flashing the BIOS of the graphics card means that an error occurs when modifying the BIOS of the graphics card, causing the graphics card to fail to start or appear abnormal.

Solution:

1. Power off method

• Disconnect the computer power supply and remove the graphics card.
• Let it sit for about 30 minutes to release the remaining power.
• Reinsert the graphics card and start the computer.

2. Short circuit method

• Remove the graphics card and find the two short circuit points on the graphics card PCB (usually marked "CLS" or " CLR CMOS").
• Use tweezers or a conductive object to short-circuit the two points for about 10 seconds.
• Reinsert the graphics card and start the computer.

3. Restore BIOS to default settings

• Remove the graphics card and insert the motherboard integrated graphics card or a spare graphics card.
• Start the computer and enter the BIOS settings.
• Find "Load Optimized Defaults" or similar options and press Enter to restore the BIOS to default settings.
• Remove the integrated graphics card or backup graphics card and reinsert the blackened graphics card.
• Start the computer.

4. Use third-party tools

• to download and install specialized BIOS recovery tools, such as NVFlash or ATIFlash.
• Use the tool to load the original BIOS file and refresh the graphics card.

5. Contact technical support

• If none of the above methods can solve the problem, please contact the graphics card manufacturer or technical support directly for professional help .

Note:

• Be sure to back up the original BIOS before flashing the BIOS.
• Only use a BIOS version that is compatible with your graphics card model.
• Operate with caution, any incorrect operation may cause permanent damage.

The above is the detailed content of What should I do if my graphics card is blackened by flashing the BIOS?. For more information, please follow other related articles on the PHP Chinese website!