


How to install WinNTSetup to Win11 system? For users who want to install WinNTSetup on Win11 systems, this problem has troubled many people. Today, PHP editor Xinyi brings you a detailed graphic tutorial to guide you on how to use WinNTSetup to install on the Win11 system.
First download the latest Win11 system ISO image, and then in Win10 system, you can directly right-click on the downloaded ISO image file and select [Load]; if it is under WinPE, WinXP, or Win7 system, you need Use the virtual optical drive tool to load the ISO image; or you can directly decompress the ISO image file without using the virtual optical drive.
Then run WinNTSetup, the software interface is as shown in the figure:
First locate the location of the install.wim file, in the sources directory of the Win11 ISO image loaded or decompressed by the virtual optical drive You can find the install.wim file.
Then set the location of the boot disk and installation disk. Generally, you can set the location of the boot disk and installation disk to whichever disk you plan to install Windows 11 to.
ps: If you don’t understand a certain setting item, you can move the mouse over it, and a prompt message will pop up (such as the prompt for the boot drive in the picture above)
Then pay attention to the right There are two options in the lower corner. One is [Mount installation drive as], which is checked by default. Select the drive letter you want to install Windows 11 on; the other is [Pre-assign drive letter]. This must be checked, otherwise the system will be installed. Later, there will be a problem of confusing drive letters.
Click the [Optimization Adjustment] button to also open the system optimization settings interface. As shown in the picture:
Here you can make some optimization settings for the Win11 system in advance. After the system installation is completed, the system has been optimized and set. Check the corresponding options according to your needs. That’s it.
Finally click [Start Installation], and then [Are you ready?] will pop up. 】window. As shown in the picture:
Select [Use Bootsect.exe to update the boot], which supports BIOS and UEFI; if you want to form a dual system or multiple systems with the existing system on the computer, then You need to check [Find and add Windows versions already installed on this computer]; it is recommended to check [Automatically restart the computer after successful installation].
Finally click [OK], and WinNTSetup will start deploying the Windows image. As shown in the picture:
The process is a bit long. When the progress is completed, a prompt window will pop up [The installation at this stage is completed. After rebooting, the Sysprep deployment phase will begin]. As shown in the picture:
Then restart the computer and you will enter the Windows 11 installation and setup process. The familiar blue Windows logo appears first, followed by Preparing Device. As shown in the picture:
After preparing the device, [Ready] will be displayed, and then you will enter the [Settings] interface that everyone is familiar with when installing Windows 8 and Windows 11.
The subsequent installation and setting steps are the same as other installation methods.
The above is the detailed content of How to install WinNTSetup into Win11 system_How to install WinNTSetup into Win11 system. For more information, please follow other related articles on the PHP Chinese website!

win10中提示80070035找不到网络路径的解决办法:1、单击“网络”,“打开网络和Internet设置”,选择“网络和共享中心”后再选择“更改高级共享设置”,然后勾选“启用共享以便可以访问网络的用户读取公用文件夹中的文件”;2、返回“网络和共享中心”单击“宽带连接”并选择“属性”,点击“网络”,勾选“microsoft网络客户端”即可。

win10找不到网络适配器驱动的解决办法:1、更新驱动程序,可以使用设备管理器来更新驱动程序;2、重新安装驱动程序,先卸载设备,再重启电脑;3、从制造商网站下载驱动程序;4、检查硬件故障。

win10自带的看图软件叫“Microsoft照片”,其下载方法是:1、打开win10电脑;2、在Microsoft Store中搜索“Microsoft照片”并下载;3、将照片查看器的默认软件设置为【照片】即可。

win10任务栏经常假死的原因是win10 64位系统可靠性不佳造成的,其解决方法:1、重启“windows资源管理器”;2、卸载冲突软件;3、重新“部署操作进程”;4、修复系统服务;5、通过powershell命令尝试修复;6、cmd中执行修复命令;7、针对右击任务栏应用图标时弹出菜单缓慢的情况;8、通过新建Windows用户来重置系统设置;9、还原系统。

win10更新后无法上网解决方法:1、检查网络连接,使用其他设备连接同一网络来确认网络是否可用;2、检查网络驱动程序,找到网络适配器,并检查是否有任何驱动程序更新可用;3、重置网络设置,打开“命令”窗口,输入“netsh winsock reset”和“netsh int ip reset”,然后重启;4、更新网络驱动程序;5、检查防火墙和安全软件设置,暂时禁用重新连接即可。

win10右键没有管理员权限的解决办法:1、在电脑桌面右键点击“此电脑”;2、在弹出的列表中找到“管理”,点击打开;3、依次选取“系统工具”->“本地用户和组”->“用户”;4、在中间栏找到并点击打开“Administrator”;5、取消勾选“账户已禁用”,然后点击“应用”和“确定”即可。

解决方法:1、先重启“Windows资源管理器”;然后以管理员身份运行powershell,执行命令重新部署进程;最后在“个性化”设置界面中,关闭加载最常访问列表功能。2、打开powershell窗口,利用命令检查并修复Windows文件。3、打开“本地组策略编辑器”,进入“内置管理员帐户的管理员批准模式”的属性窗口;然后在“本地安全设置”选项卡中,点击“启用”;最后重启电脑。

不够用。虽然4G内存足够满足Windows 10系统的安装需求,但问题是不可能只在电脑里安装一个系统,还要安装其他应用,而这些应用也会占用一定的内存空间;先不考虑CPU、硬盘和显卡等配件是否能够满足需求,只单独说内存,假设用户安装的Windows 10系统占用了2G内存,但其他的辅助插件和应用可能还会占去2G内存,一旦内存被占满,必然会导致电脑出现卡顿、运行慢的情况。


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Dreamweaver Mac version
Visual web development tools

SAP NetWeaver Server Adapter for Eclipse
Integrate Eclipse with SAP NetWeaver application server.

Atom editor mac version download
The most popular open source editor

VSCode Windows 64-bit Download
A free and powerful IDE editor launched by Microsoft

SublimeText3 Chinese version
Chinese version, very easy to use
