How to use a USB flash drive to install the system on a newly assembled computer?

The newly assembled computer does not yet have an operating system. How to use a USB flash drive to install the system? PHP editor Xigua will provide you with detailed tutorials. This article will introduce the selection of U disk creation tools, acquisition of system images, production of U disk boot disks, BIOS boot U disk settings, detailed steps for system installation, and solutions to common installation problems. By reading this article, you will learn how to easily use a USB flash drive to install the system for your new computer and start your computer journey.

How do you use a USB flash drive to install the system on a newly assembled computer?

How to install the system on a newly installed computer using a USB flash drive

1. First, you need a USB flash drive, preferably 8G or more in size.

2. Use a U disk to connect to a computer with Internet access, search for U disk installation tools online (there are Chinese cabbage or Laomaotao, etc., they are all the same anyway), download and install them in the U disk, and then Then download the WINDOWS system (it depends on which system you want to install. You can choose to download it. It is recommended to download the pure version of the system). After downloading, move the system to the USB disk. Because it is a newly installed computer and there is no driver, go online and download a driver. Put the Elf universal network card version into the USB flash drive, and then you can start installing the system.

3. Connect the assembled computer to the power supply, network cable, and monitor. Make sure it can work normally before pressing the power button. After powering on, continuously click the DEL key (next to the numeric keys) to enter the BOIS settings. In the BOIS settings Find the boot inside, set it to boot from the USB disk, press F10 to save and then restart (the system will automatically restart here).

4. When you turn on the computer, you will come to the startup interface of the U disk. Select to enter the XXXPE system installation (XXX here refers to the installation tool you used). After a while, you will come to the PE main system. , don’t rush to install the system first, use a partition tool to format the entire hard disk to ensure 4K alignment. This will improve the hard disk reading speed, and then partition. This depends on the size of your hard disk and how many zones it needs to be divided into, but the system The disk must be divided into a separate area. Now you can start installing the system.

5. Click the one-click installation icon to start installing the system. Select the system you downloaded and then select the hard disk partition to install (usually installed on the C drive), and then enter the automatic installation process. The computer will restart several times during the system installation process. When the computer restarts, seize the time to enter the BOIS again, and set the startup to hard disk startup to avoid entering the U disk startup interface every time.

6. After the system is completely installed, click on My Computer, open the USB flash drive, find the downloaded driver wizard and install it (note that the driver wizard has bundled installation software, please remove the check mark during installation). After installation, run the driver wizard for diagnosis. Here you need to ensure that the computer can access the Internet normally. Install the driver based on the diagnosis results and the computer can be used.

7. At this time, the computer system is still not activated. You can purchase a genuine key or go online to download an activation tool. After activation, restart the computer and it can be used normally.

Summary: In fact, installing the system is not difficult. The main thing is to remember those few steps.

b550m How to install the system on a newly installed computer?

The system installation method is as follows:

1. Prepare the system installation package file, a bootable CD.

2. Turn on the computer, then turn on the optical drive, press the del key when booting, enter the BIOS system, find the boot menu, and set the first boot to the CD. Press F10 to save and restart the computer.

3. Enter the pe system, open the disk tool, and format the b550m computer disk partition.

4. Open the system installation tool, load the system installation package, click Install, and wait for the automatic installation to complete. The computer will automatically restart and enter the system deployment page. Follow the installation prompts to complete the system installation.

How to install the system on the computer that has just been installed?

How to install the system on the computer you just installed

01

Prepare the system installation disk or USB boot installation disk.

02

Set the BIOS to boot first. If the system disk is set to CD-ROM boot, if the USB boot disk is set to USB boot.

03

Press any key to enter the installation interface, select the correct installation method and installation drive letter, the system will automatically install the system, we only need to wait for the end, but sometimes we need to operate it , for example: time, language settings, etc.

04

After the installation is completed, it still doesn’t work, because some system disks may come with some drivers, but it is recommended to install the latest drivers. Download a driver or something after connecting to the Internet. Update the driver and it will be fully installed.

The computer has just been assembled, how to install the system next? How to install the driver?

1. Install the system first, and then install the driver. The official driver will be installed first, and the driver wizard will not be allowed to do it automatically.

2. If there is a driver disk, you can install them all. It will not affect anything. If you know which ones you don’t need, you don’t have to choose to install them. If there is no driver disk, the driver wizard will install it completely without you having to worry about it.

3. You don’t need to worry about downloading the driver wizard yourself. You must download it yourself because you are assembling it. Just go to the official homepage of each component to search and download, such as the graphics card to search for the model number on the official homepage of the graphics card.

4. The graphics card has nothing to do with the monitor, but how do you see it without a monitor? So it must be connected, and then you install the graphics driver. After installing the driver, the monitor can be used. Before the graphics driver is installed, the monitor will also display, because the system will come with its own driver for temporary use.

5. Depending on your level, it is recommended to burn it to a CD for installation, or you can also use a USB disk to install. Burn to a CD. If the BIOS is not set to boot from the optical drive, it may be troublesome. Now the motherboard defaults to booting from the optical drive. Since it is a system disk, set it to CD-ROM startup, put the CD into the CD-ROM drive, start the machine, and jump to the boot interface. Generally, you can understand it and click Next.

How to install the system after the computer is assembled?

You can use a USB flash drive to install the system after assembly. After the computer is assembled, a U disk is required to install the system. You can download the U boot disk creation tool of the Win 10 system on other computer devices, and then prepare a U disk of more than 8G to make a U boot disk. , after making the boot door, we only need to boot the assembled computer and enter the BIOS.

Set the U disk startup item as the first boot item, and we can use the prepared startup disk to automatically install the system.

How to install the system on the computers of my own group?

If you have assembled a computer yourself, the following are the general steps to install the operating system (taking Windows system as an example):

Prepare the installation media: Obtain the installation CD of the Windows operating system or USB drive (purchase or download using official channels), plug it into your computer.

Start the computer: Press the power button to start the computer, and press the corresponding key during the boot process (usually Del, F2, F12, etc., depending on the motherboard model and manufacturer) to enter the BIOS setup.

Adjust the boot order: In the BIOS settings, adjust the boot device order to prefer the optical drive or USB drive for booting from the installation media.

Save and Exit: Save changes to BIOS settings and exit the BIOS menu. The computer will restart and boot from the selected installation media.

Installation process: The computer will load the Windows installation program. Follow the on-screen instructions to select settings such as language, time zone, keyboard layout, and more. After accepting the license agreement, select "New Install" and then you can select the drive and partition to install to.

System installation: Select the drive for installation. During the installation process, the system will copy the required files to the computer and prompt you to make other settings, such as creating a user name and password, selecting a computer name, etc.

Complete Installation: When the installation process is complete, the computer will restart. You need to follow the instructions on the setup screen, such as registering a product key, custom settings, privacy settings, etc.

Update and Driver Installation: Once the system installation is completed, after successfully entering the desktop, it is recommended to perform Windows Update immediately to obtain the latest security patches and feature updates. The required hardware drivers should also be installed. You can download and install the appropriate driver for your device from the official website of each hardware manufacturer.

These steps provide a general installation process, but please note that specific steps may vary depending on operating system version and personal needs. It is recommended to refer to the installation guide or official documentation of the operating system for more detailed information and specific instructions

How do I install the system on my own computer?

Assembling your own computer and installing the operating system requires the following steps:

1. Prepare hardware: computer host, monitor, keyboard, mouse, USB flash drive, etc.

2. Download the operating system image file, which can be downloaded from the official website or a third-party website.

3. Download a U disk boot disk making tool, such as Laomaotao, Chinese cabbage, etc., insert the U disk into the computer, open the startup disk making tool, and follow the prompts to make the U disk into a boot disk.

4. Copy the downloaded operating system image file to a USB flash drive or mobile hard disk.

5. Insert the prepared U disk boot disk into the computer, restart the computer and enter the BIOS settings, and set the U disk as the first boot item.

6. Enter the USB boot interface, select "Install System" or "Start WinPE" and follow the prompts.

7. In the PE interface, you can run the system installation tool, such as "Laomaotao winpe table" in Laomaotao PE, select the partition where the operating system image file is located, and start installing the operating system.

8. Wait for the operating system installation to complete, pull out the USB flash drive and restart the computer.

9. The computer will enter the system configuration interface and follow the prompts, such as setting the region, time zone, computer name, etc.

10. After the configuration is completed, the system will automatically enter the desktop, and you can start using the newly installed operating system.

It should be noted that before installing the operating system, important files and data need to be backed up to avoid being lost during the installation process. At the same time, you need to pay attention to the operating steps and tips during the installation process to avoid errors or hardware damage.

The machine has just been installed and I have entered the bios. How do I install the system?

Are you installing WIN10? This may happen if you have an MRB partition table format partition and then install WIN10. Installing WIN10 requires a GPT format partition table. This format partition table has a separate boot disk to install WIN10 startup items. MRB does not have one, so MRB does not have a separate startup disk when installing WIN10, so even if there is no startup item after installing the system, you have to enter the BIOS.

If it is not WIN10 but the same is true for WIN7 installed, go to the computer dealer to check whether there is a hardware problem.

How to install the system on the computer I just bought?

Installing the system:

1. When turning on the computer, there will be a prompt in the lower right corner of the screen. The new motherboard does not need to enter the BIOS for settings. The computer starts from the CD. For example, if the Gigabyte motherboard is turned on, press F12. There is an option to boot from the CD.

2. Press the computer's power switch to turn it on, insert the system installation CD into the CD-ROM drive, click Del to enter the BIOS, find: BOOT-boot-CD\DVD, set the computer to boot from the CD, and then press the F10 key Save, enter: Y (Yes) in the pop-up prompt box, and press Enter.

3. The computer automatically restarts and enters the system installation interface. Follow the prompts until the system installation is completed.

4. After the installation is complete, restart the computer, then download Tencent Computer Manager to install the driver, and then you can use the computer.

I just assembled my computer, how do I install the system?

1. Tools required: One computer and a 4G U disk are available. 2. System U disk: Make a U disk PE boot disk.

2. The steps for installing the system on a newly assembled computer are as follows:

1. Insert the U disk boot disk. When starting the computer, press F12, F11, Esc and other shortcut keys to open the boot menu, select the USB option and press Enter;

2. Start to enter the U disk main page. Select Enter to enter the PE system;

3. Open the DiskGenius partition tool under the PE system, click -;

4. Set the number of partitions, such as 3 or 4, and then set each The size of the partition, C drive is recommended to be 50G or above, click OK to format;

5. After completing the partition, run, the image path will be loaded by default, select the installation location, usually C drive, OK;

6. Go to the following interface to decompress the system;

7. Then the computer automatically restarts, pull out the U disk, and start installing the system;

8. After the system is installed Boot into a new system desktop.

The above is the detailed content of How to use a USB flash drive to install the system on a newly assembled computer?. For more information, please follow other related articles on the PHP Chinese website!