How to inspect the assembled computer? Recommend a configuration sheet for assembling a computer?

When assembling a computer, how do you check it to ensure it is running normally? This article will introduce in detail the inspection process of assembling a computer, from hardware installation to software testing, guiding you step by step to ensure the stability of the computer. In addition, we also recommend a detailed assembly computer configuration list for everyone, providing computer configuration solutions for different budgets and needs, helping you easily choose a computer that meets your needs.

How to inspect the assembled computer?

1.

is to check the packaging. First of all, the box must be new and not too old. The parameter information on the side of the box must be accurate. Make sure it is the model you want. After all, there are many businesses who like to fish in troubled waters and give machines with lower-level configurations and similar appearances to digital novices. Secondly, the box must have a seal. All laptops I have tested, as long as they are new machines, regardless of brand or price, have seals on the outside of the box. I have never seen one without them. Moreover, some first-line brands have high-tech seals. No matter how you tear them off, they will leave marks on the box body, which cannot be restored or removed. They are difficult to forge and are a very important identification point. Although there are some merchants who will replace the entire set of packaging boxes with new ones to fool digital novices.

2.

is to check the fuselage. After unpacking, please carefully inspect side A first. This is the easiest place to leave traces of use. If there are scratches on side A, there is probably something wrong with the machine. Then shake it and listen to see if there is any abnormal noise or if any parts fall out. Look at the interface to see if there are any traces of plugging or unplugging. Open and close the screen again to see if there is any creaking sound. If so, please return it on the spot. Because even if it is a new machine, it is defective and has quality issues.

Then, if there are no problems, then check the bottom case screws and laptop screws. As we all know, they are extremely soft. As long as they have been screwed, they will definitely leave traces. For gaming laptops, you can also take a look at the air inlets and heat dissipation fins. Machines that have mined mines are running at high intensity. There will be dust in the air inlets and heat dissipation fins. There will also be traces of oxidation. They are black and can be seen at a glance. Can recognize.

Recommend a computer configuration sheet for assembly?

Configuration list:

C P U amd a4-3400 310

Memory Apacer 4GB DDR3 1333 105

Motherboard Gigabyte a55m-ds2 405

Graphics cpu integration

Hard disk WD 500GB 7200 rpm 16MB SATA3 blue disk 370

Optical drive optional

Chassis Jinhetian Gladiator F10 99

Power supply Jinhetian Gladiator ATX-375W Big Windmill Silent Edition 350W 90

Monitor Acer V203HVCb 20-inch widescreen LCD monitor 625

Keyboard and mouse Microsoft keyboard and mouse set smart set 600 89

Configuration evaluation : The Gigabyte a55m-ds2 chosen for the motherboard configuration is not luxurious, but it is adequate. The expansion slot is equipped with a PCIE x16 slot, allowing users to conveniently connect an external independent graphics card. The CPU is amd a4-3400, which provides native support for the DirectX 11 interface. The display performance is very good, and the processor core is also a dual-core design, which is more than enough for daily applications.

Is it more cost-effective to assemble a computer or a brand-name computer?

It depends on what you are pursuing. If you want service, choose a brand. If you want cost-effectiveness, choose assembly.

One computer multi-screen assembly solution?

Traditional multi-screen computer refers to a complete system that implements one host and multiple monitors for simultaneous multi-screen display. It is usually connected with an HDMI cable or a VGA cable and generally includes a host, multiple monitors (LCD ) monitor, multi-screen monitor stand, and matching keyboard and mouse, etc. A set of keyboard and mouse enables quick switching, and each screen displays and runs its own program completely independently.

Wu Ji’s new assembled computer can’t be turned on?

The analysis and solutions to the reasons why a newly assembled computer cannot be turned on are as follows:

1. There are poor contact problems in various internal components of the machine, such as the most common memory contact problem.

2. There is poor contact between the host and the monitor.

Solution:

1. First, observe whether there is poor contact between the host signal line and the monitor. 2. Turn off the computer and open the case. There is a long strip of equipment on the motherboard, which is the memory. If you look at it, there are two buckles on both sides. If you open it, you can take out the memory and reinsert it (note that it must be inserted in place). ), and then turn it on

Is it reliable to assemble the computer at a machine shop?

Not reliable because there is no after-sales service guarantee. The computers assembled by Goji are all assembled and sold using computer accessories. All the computers assembled do not have a formal manufacturer's production certificate, and they are not of a big brand. At the same time, they cannot provide complete after-sales service guarantee. Therefore, if there is an accident or accident in assembling the computer, After-sales service cannot be provided when there are quality problems

How much does it cost to assemble a computer?

Graphics card rtx2060 2500 yuan (supports ray tracing)

cpu R5 3600 1400 yuan

Motherboard: B450 600 yuan

m.2 Solid state drive 500G 600 Yuan

4T mechanical hard drive 600 yuan

Main case with fan + power supply 600w 500 yuan

Memory stick 8G two, 500 yuan

Keyboard and mouse 100 Yuan

Assemble a computer checklist?

Assembling a computer does require a checklist, because when we assemble the computer, after determining the configuration and operation requirements of the computer, we can purchase some suitable motherboards online, and then determine the power supply, graphics card and other configurations based on the motherboard. If you ask, just make a list and ask the computer factory or dealer directly to buy it

Assemble the computer, okay?

Assembling a computer can have some benefits, such as:

1. Customized configuration: Assembling a computer can choose the appropriate hardware configuration according to personal needs, and you can choose more based on your own purpose and budget. Suitable components.

2. Cost-effectiveness: Assembling a computer is more cost-effective than purchasing a branded machine. You can save costs by choosing more cost-effective hardware.

3. Upgradeability: Assembling a computer is usually easier to upgrade the hardware. The hardware can be upgraded or replaced at any time as needed to improve the performance of the computer.

4. High degree of freedom: When assembling a computer, you can choose the appearance design, color matching, etc. according to your personal preferences, and you can create a unique computer.

However, there are also some challenges and risks in assembling a computer, such as requiring certain professional knowledge and skills, choosing inappropriate hardware that may lead to compatibility issues or poor performance, possible risks during the assembly process, etc. . Therefore, if you do not have enough experience and skills, or do not know much about computer hardware, it may be more suitable to buy a branded machine.

Computer bed assembly?

There are drawings when you buy a computer desk, just assemble it according to the drawings

The above is the detailed content of How to inspect the assembled computer? Recommend a configuration sheet for assembling a computer?. For more information, please follow other related articles on the PHP Chinese website!