How to reinstall the assembled computer system?

System reinstallation is an essential step when assembling a computer, but many users will encounter some problems during this process. PHP editor Baicao has sorted out common problems in assembling and reinstalling computer systems and provided corresponding solutions. I hope that this article can help you successfully complete the reinstallation of the assembled computer system.

How to assemble and reinstall the computer system?

1. Turn on the computer and press the F2 key to enter the BIOS setting interface, select Advanced BIOS Settings: Advanced BIOS Features;

2. Advanced BIOS Settings (Advanced BIOS Features) interface, first select the hard disk boot priority level, Hard Disk Boot Priority;

3. Hard Disk Boot Priority selection: Use the plus and minus signs ", -" on the small keyboard to select the mobile device, and select the U disk in On the top.

4. Then select the first boot device (First Boot Device): select the U disk to boot.

5. Then restart to start the step-by-step installation. The installation process will restart several times, just wait.

6. After installing the system, remember to install the driver!

How to install the computer system by yourself?

1. First, we open the computer browser and search for the installation bar to reinstall the system with one click, download and open the software, and then select the system to be downloaded.

2. The system image file is a bit large, so we have to wait patiently for downloading.

3. Download and deploy the environment. After deployment, we can restart the computer.

4. We enter the windows startup manager interface and select the second one to enter the computer’s pe system.

5. Enter the pe system interface to continue the installation.

6. After the installation is completed, we need to restart the computer again.

7. After restarting the computer, we will enter the new system.

The above is a tutorial on how to install your own computer system. I hope it can help everyone.

Should I buy a computer system to assemble myself?

When you buy motherboards, hard drives, and CPUs, you can deliver them to the seller.

How do newbies install computer systems?

First download System Home Installation Master.

After downloading, close all anti-virus software and run this program.

After entering the page, click one-click to reinstall the system.

After entering this page, click directly to download more systems. Find the system you want to install here.

Then it will download a pe data first and wait for the download to complete.

After the download is completed, we will start downloading our system.

After this, the user does not need to perform any operations on the system. After the system is downloaded, the software will automatically restart the computer system.

After restarting, directly enter the pe backup interface.

Wait for the backup to be completed, restart again and enter our system!

How to install the assembly screws of the shelf?

1.

Prepare the impact drill. The size of the impact drill bit needs to be determined according to the size of the expansion screw of the shelf. This is a necessary tool;

2.

After setting the approximate position of the shelf, prepare a ruler to measure the height, hole spacing and hole position, mark it with a pencil, and then drill the holes with an impact drill;

3.

Drive in the expansion screws and fix the expansion screws;

4.

Fix the shelf with screws. When drilling, pay attention to the fact that the holes should be vertical and cannot be tilted to affect use.

How to install the graphics card on the assembly machine?

Assembling the graphics card is usually the last step in building a desktop computer. Here are the general steps for installing a graphics card:

Turn off the computer and disconnect all power and data cables.

Find the PCIe slot on the motherboard. This is usually a longer slot, usually located in the center part of the motherboard. If your motherboard has multiple PCIe slots, choose the one closest to the CPU socket.

Remove the protective cover of the graphics card slot (if there is one).

Gently insert the graphics card into the PCIe slot. Make sure you insert the graphics card into the correct slot and push it all the way down until you hear a slight click.

If your graphics card requires external power, please connect the power cable to the graphics card. This is usually a 6 or 8-pin power connector that draws additional power from the power supply.

Fix the graphics card in the chassis. Typically, you'll need to use screws to secure the graphics card inside the case. This helps keep the graphics card secure and prevents it from moving during transportation and use.

Connect the graphics card to the monitor. You can connect your graphics card to your monitor using HDMI, DisplayPort, DVI, etc. cables.

Reconnect all power and data cables and turn on the computer.

Install the graphics card driver. After turning on the computer, you need to install the graphics card driver to ensure that the graphics card can work properly. Drivers can be downloaded and installed from the graphics card manufacturer's website.

The above is the detailed content of How to reinstall the assembled computer system?. For more information, please follow other related articles on the PHP Chinese website!