Home  >  Article  >  Computer Tutorials  >  How to plug in the wiring port of Mingxuan motherboard?

How to plug in the wiring port of Mingxuan motherboard?

王林
王林forward
2024-04-24 09:28:10660browse

Want to know how to plug in the wiring port of Mingxuan motherboard correctly? PHP editor Xinyi brings you a detailed explanation of the connection method of Mingxuan motherboard. He introduces the connection method and precautions of each connection port in detail to help you easily connect the motherboard. Hurry up and read the following to master the detailed tutorial and make your motherboard wiring clear at a glance!

How to plug in the wiring port of Mingxuan motherboard?

How to plug in the wiring port of Mingxuan motherboard?

The jumpers on the computer case can be connected to the Mingxuan motherboard in the following ways:

1. The jumpers on the computer case are not jumpers, but external wires.

External cables are divided into USB data cables, front audio cables, switch cables, and indicator cables.

2. USB data cables generally have two sets: one set of red and white lines and one set of black lines. There is a USB mark on the motherboard. There are usually nine pins on the motherboard. The missing pin is not used with the pin below it. The one next to it is the ground wire (connected to the black wire).

3: The front audio cable is a nine-pin plug (one of the 10 plugs is blocked). This is easy to find. The ten-pin socket on the board is missing one pin of the nine-pin plug.

Note: The other ones are the PW line (power on and off), RST (cold restart), HDD-LED (disk read indicator), PW-LED (power indicator), which are marked on this board.

How to connect the motherboard control cable?

1. When connecting the power switch cable to the power switch cable, first find the two-pin plug marked "power sw" on the chassis panel cable, which is white and brown, and then plug it into the motherboard Just use the pins marked with "pwr sw" or "RWR".

2. The reset switch cable is used to warm-start the computer. When connecting, first find the two-pin plug marked "RESET SW", which is white and blue, and then plug it into the pin marked "Reset SW" or "RSR" on the motherboard. One wire in the middle is empty and two are missing, and the two ends are white and green

3. For the power indicator light connection line, first find the three-pin plug marked "Power LED", and then plug it into the motherboard On the pin marked "PWR LED" or "P LED".

4. First find the two-end plug marked "H.D.D.LED" on the hard disk indicator light connection cable. The connection cable is white and red. Plug it into the motherboard marked "HDD LED" or "IED". "LED" on the pin. Pay attention to the direction when inserting.

How to plug in the power-on button cable on the computer motherboard?

How to connect the power-on button wire on the computer motherboard:

1. Arrange all the wires together. According to the above markings, first clarify the definition of each wire:

a. Power switch: POWER SW, possible names: POWER, POWER SWITCH, ON/OFF, POWER SETUP, PWR, etc. Function definition: reset button on the front of the chassis.

b. Reset/restart switch: RESETSW, possible names: RESET, Reset Swicth, Reset Setup, RST, etc. Function definition: power-on button on the front of the chassis.

c. Power indicator: /- Possible names: POWER LED, PLED, PWRLED, SYS LED, etc.

d. Hard drive status indicator: HDD LED, Possible names: HD LED

e. Built-in small speaker (or alarm): SPEAKER, possible name: SPK, function definition: motherboard abnormality alarm.

f. Audio connection cable: AUDIO, possible name: FP AUDIO, function definition: chassis front audio, generally a whole.

g, USB connection to the front interface is generally a whole.

2. Find the location of each pin on the motherboard.

How to plug in the button switch wire on the chassis?

Generally, you can find the plug-in terminal of the push button switch on the motherboard. The push button switch on the chassis is the startup switch of the computer. We can find the wiring terminals along the motherboard power interface, usually in a row, and connect the push button switch, restart switch, hard disk operation indicator, fault light connection, etc. in sequence from top to bottom. It is also very simple to identify and easy to find.

How to plug in the connection cable between the computer panel and the motherboard?

1. The motherboard generally has four sets of switch indicator lines and POWER SW power switch. POWER LED power indicator light. RESET SW reset switch. H.D.D LED keyboard status indicator. Pay attention to the positive and negative poles when connecting. Usually, colored lines such as red, green, and yellow represent the positive pole, and white and black represent the negative pole. Pay attention to the distinction. Please refer to the manual for connecting the signal cable to the motherboard. Different motherboards have different connection methods.

1. Commonly used 9-pin boot cable connection method 2. Commonly used 20-pin boot cable connection method Selection principles The computer motherboard has a significant impact on the performance of the computer. Some people once compared the motherboard to the foundation of a building, and its quality determines whether the building is strong and durable; others vividly compared the motherboard to a viaduct, and its quality is related to the smoothness and speed of traffic. 1. Stable work and good compatibility.

2. Complete functions and strong scalability.

3. Easy to use, you can adjust as many parameters as possible in the BIOS.

4. The manufacturer has a website that is updated in a timely manner and has rich content, making maintenance convenient and quick.

5. The price is relatively cheap, that is, it is cost-effective.

How to plug in the power cord of amd motherboard?

The specific steps to plug in the power cord of the AMD motherboard are as follows:

1. Plug the power cord into the power interface on the motherboard. Typically the power connector is located above the power cord assembly.

2. When inserting the power cord, find the power interface on the motherboard, determine the direction and insert the power cord. Use appropriate force when inserting, and do not insert it backwards or not deeply.

3. After inserting the power cord, make sure the socket is inserted firmly and the plug is firmly connected inside the socket to avoid damage to electronic equipment or short circuit caused by incorrect insertion.

Any operation performed inside the computer must be performed with the power source disconnected. In addition, when selecting a power cord, you should choose a power cord that meets the specifications, and determine the insertion direction according to the model of the power component and motherboard interface. Be careful to avoid excessive force or sudden twisting of the plug when inserting to avoid damage to electronic equipment or other unnecessary losses.

How to plug the computer switch cable into the motherboard?

The method of plugging the switch cable into the computer motherboard is as follows

1. The two ends of the power indicator PowerLED cable are green (white/black). Plug it into the motherboard marked "PWRLED" ” or “PLED” on the pin. Green plugs into PLED (white/black) plugs into PLED-.

2. The two ends of the hard disk indicator HDDLED cable are red and black respectively. The red end is connected to the HDDLED pin of the motherboard, and the other color is plugged into the motherboard pin marked "HDDLED-".

3. The power switch PowerSW or PWON is generally brown and white in color, and is plugged into the pins marked "PwrAW" or "RWR" on the motherboard respectively.

4. The reset button RESETSW is generally blue and white in color and is inserted into the pins marked "Resetsw" or "RSR" on the motherboard.

5. The speaker SPEAKER is usually red and black in color and has two empty wires in the middle. It is plugged into the pins marked "PEAKER" or "SPK" on the motherboard. Plug red into the positive pole, black into the negative pole ---.

The above is the detailed content of How to plug in the wiring port of Mingxuan motherboard?. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:xtzjcz.com. If there is any infringement, please contact admin@php.cn delete