Gigabyte h61 motherboard

How much memory does the Gigabyte h61 motherboard support?

1. DDR3, a maximum of 8G for a single stick, a maximum of 16G for two slots, and a maximum of 32G for four slots.

2. The Gigabyte H61 motherboard supports a maximum memory of 16GB and supports dual-channel DDR3 13331066800MHz memory; the Gigabyte G41 motherboard supports a maximum memory of 8GB and supports dual-channel DDR3 1333 (overclocked) 1066800MHz memory.

3. Maximum memory capacity: 16GB Memory description: Supports dual-channel DDR3 13331066800MHz memory. Gigabyte GA-H61M-D2P-B3 is a motherboard with a maximum memory capacity of 16GB.

4. Gigabyte H61M-S2-B has 32 5V DDR3 DIMM slots, supporting up to 16 GB. Due to limitations of the Windows 32-bit operating system, if more than 4 GB of physical memory is installed, the actual displayed memory capacity will be less than 4 GB.

5. The memory specifications supported by the H61 motherboard are as follows: 1. Memory type: DDR3; 2. Memory slot: 2×DDR3DIMM; 3. Maximum memory capacity: 16GB; 4. Maximum single memory: 8GB; 5. Memory description: Supports dual-channel DDR31333/1066/800MHz memory.

Does Gigabyte h61 motherboard support e3 1230v3?

E3-1230V2 can be used with h61 motherboard, but the effect is not ideal. The processor pins supported by H61 are 1155-pin processors, and the e3-1230v2 is a 1155-pin processor. The two are matched.

E3-1230V2 can be used with h61 motherboard. The processor pins supported by H61 are 1155-pin processors, and the e3-1230v2 is a 1155-pin processor. The two are matched. It can only be used with E3 1230 or E3 1230V2, two of this series, and later V3 cannot be used. The stitches are different.

Let’s talk about e3 1231 v3 first, which is not supported by H61 motherboard. Then there is e3 1230 v2. This depends on whether your motherboard has updated BIOS that is compatible with the Ivy Bridge architecture. If so, E3 1230 v2 is compatible. If not, you can also update it yourself to gain support.

GIGABYTE h61-d1 motherboard can be connected to two monitors

Next, you need to use two of the VGA cables, HDMI cables, and DVI cables to connect the monitors. In this way, one computer host has two monitors connected.

Please look at the back of the case for details. The back half of your independent graphics card has three real output interfaces. If the integrated graphics card outputs from the motherboard, there are usually two. But half of the two interfaces will not have the same specifications, such as DVI and HDMI. But it doesn't matter, you can also connect two monitors at the same time.

You can connect two monitors to the two graphics cards respectively to achieve dual-screen output, or its backup function, so that one of them can take over the work when it is damaged.

Connect the HDMI interface and DVI interface of the graphics card to one monitor each. After connecting, turn on the power switches of the two monitors. After connecting, power on the computer and enter the system, then right-click on the desktop to enter the screen resolution interface, select "Extend these displays" in the multi-screen display drop-down menu and click OK.

Please provide the specific model of the motherboard. If you are not using a discrete graphics card, it depends on the number of interfaces on the motherboard. There are currently three mainstream monitor interface standards: DVI, VGA, and HDMI. Please check the back panel and use the corresponding cables to connect to the monitor to support multiple monitors.

h61 motherboard boot sequence

1. Start the computer and hold down the DEL key until the BIOS setting window appears (usually with a blue background and yellow English characters). Select and enter the second item, "BIOS SETUP".

2. If there is no floppy drive but the floppy drive is enabled, you can disable the floppy drive. Press DEL to enter the BIOS after booting, select: STANDARD CMOS FEATURES DRIVE A: Set to None DRIVE B: Set to None Press F10 to save, enter "Y" and press Enter.

3. The main connections between the ASUS p8h61 motherboard and the chassis are as follows. After connecting the power switch PWR_SW in the picture above, you can start it normally.

4. Press DEL to enter the BIOS when you turn on the computer. Generally, there is a BOOT setting in the advanced menu, but sometimes there is a special BOOT setting directly on the menu. To enter the BOOT setting, use the and - sign on the keyboard. Just move the disk you want to use for booting.

The above is the detailed content of Gigabyte h61 motherboard. For more information, please follow other related articles on the PHP Chinese website!