Gigabyte motherboard reinstall system

How to reinstall the system using a USB flash drive on a computer with Gigabyte h61 motherboard

1. Insert the prepared bootable USB flash drive into the computer USB interface, turn on or restart, press Press the startup hotkey F12; in the pop-up startup item interface, press the up and down arrow keys to select the U disk option, which is usually an option with USB Flash, USB Storage, and USB HDD. Press the Enter key to enter.

2. How to use U disk to install the system on Gigabyte h61 motherboard 1. Make the boot and put the U disk. 2. Prepare to set the boot U disk item. 3. You can install the system. I feel that the key is that you make the boot U disk and set up the motherboard. The problem.

3. Make a U disk boot disk, download u start U disk installation tool and install it; connect a blank U disk to the USB interface, the U disk is 8G or above; after the U disk boot disk creation tool reads the U disk, Click to start production, and then wait patiently for the U disk boot disk to be created.

4. Next, the editor of U Hero will share with you the USB boot tutorial for Gigabyte GA-H61M-DS2 motherboard! First, we insert the USB flash drive that has been created using USB boot, then restart the computer. After restarting, as soon as we see the screen, press the F12 key continuously to enter the settings.

5. Insert the USB flash drive into the computer, then turn on the computer, press the power button and then press the del key on the keyboard with your finger continuously, and wait for the computer to enter the BIOS page.

6. Just press Enter with "U Disk". After the configuration is set, press the "F10" key on the keyboard to save and exit. Then the computer will restart itself, and the rest is to automatically install the system. The above is Steps to set up BIOS startup. The BIOS settings of each computer are different, you can refer to them. Once you learn it, you can use a USB flash drive to install the system.

Do I need to reinstall the system to switch uefi to legacy? Gigabyte h81-d3 How to set the motherboard BIOS

1. Shut down your computer or restart it. When restarting, press the F2 button on the keyboard to enter the BIOS interface. Many computers use F2 to enter the BIOS. Of course, there are different ones. Find it by yourself. Enter the BIOS interface and select the boot option in the title option.

2. Method 1: Enter the BIOS and enter the "Boot" item. Default "Boot Mode" to "UEFI" and change it to "Legacy Support", press Enter. Default "Boot Priority" to "UEFI First", change it to "Legacy First", press F10 to save.

3. OS Optimized Defaults system default optimization settings, switch to " EXIT" option. When switching to UEFI: If you only install Win81, you can select "Enable", in other cases, "Disable". When switching to Legacy: select "Disable".

4. Setting options and meanings that need to be noted during the UEFILegacy switching process. First, press the computer power button (or restart). When the system shuts down the computer and enters the restart process, repeatedly press the shortcut key to interrupt the computer startup and enter the BIOS setting interface. Note: Different computers The shortcut keys to enter the BIOS are different, usually FFDEL, ESC, etc.

5. Boot Mode startup mode selection This option is still in the "Startup (Startup)" tab, that is, Boot Mode (Startup mode), this This is the main setting option when switching UEFILegacy BIOS.

6. ③Enter the main setting interface (the menus vary for different motherboards), continue to click the Boot menu, the one to the right of Boot mode is the current Boot mode, the default here is UEFI boot.

How to set bios for Gigabyte motherboard USB disk installation system

1. Tools and raw materials System version: windows10 system Brand model: Lenovo Savior R7000P To boot the Gigabyte motherboard USB disk, press f. Insert the USB port of the computer into the boot USB disk, then turn on the Gigabyte motherboard computer. When the startup screen appears, press the DEL key to enter the uefibios interface.

2. The Gigabyte motherboard has a quick start boot Menu, we can quickly press F12 when booting up to bring up the quick boot menu, where you can directly select your USB flash drive device to enter the USB flash drive system.

3. The main method for setting up Gigabyte motherboard BIOS to boot from a USB flash drive is as follows: When starting the computer, when a prompt appears on the screen, quickly press the F12 key to enter the quick boot menu.

4. Gigabyte motherboard bios settings usb boot: The new Gigabyte motherboard BIOS setting tutorial is as shown below. To switch between Chinese and English on Gigabyte motherboards, you only need to click the "Simplified Chinese" switch button in the upper right corner.

5. Insert the USB flash drive into the computer, then turn on the computer, press the power button and then press the del key on the keyboard with your finger continuously, and wait for the computer to enter the BIOS page.

6. The editor below will share with you the steps to set up the Gigabyte uefi boot BIOS.

What should I do if this happens after reinstalling the system on the Gigabyte motherboard?

In addition, it may be caused by hardware problems, such as memory, hard disk, etc. failures. You can try to disassemble the relevant hardware for inspection, or contact after-sales service. If none of the above methods solve the problem, you may consider contacting GIGABYTE motherboard customer service and providing specific error information so they can help diagnose the problem.

The motherboard does not recognize the U disk (it is recommended that you go to the motherboard and reset the boot U disk as the first startup item) 2 The format is incorrect (a blue screen and other codes appear) and you need to re-create the boot U disk. You can also consider it. Use the CD to boot with this USB flash drive. The motherboard self-test will directly show the BIOS settings.

The main reason why the motherboard cannot install the system is because the key files of the operating system are damaged. You can try to use the system CD to scan for system errors and see if the files can be automatically repaired. If not, it is recommended to back up the data on the disk and then reinstall the operating system. .

When booting the USB flash drive of the Gigabyte motherboard, press f

When booting the USB flash drive of the Gigabyte motherboard, press the Delete key. Tools: Dell K550, Win1BIOS settings. The way to enter the BIOS on a Gigabyte motherboard is to continuously click the Delete key. First insert the USB flash drive into the computer, then turn on the computer. When the boot interface appears, click the Delete key continuously to enter the BIOS setting interface.

Press F12. On GIGABYTE motherboards, it is sometimes necessary to use a USB flash drive for system installation or repair. To start the computer from a USB flash drive, you need to press the corresponding keys during the startup process to enter the boot menu and select the USB flash drive as the boot device.

It is recommended to insert the USB port on the rear side, because the front USB port of some motherboards is not connected to the motherboard, which will cause the U disk to not be found. The startup shortcut key is F12. GIGABYTE Technology (foreign name GIGABYTE Technology) was founded in 1986. It is one of the computer hardware manufacturers in Taiwan, China, focusing on motherboards and graphics cards.

The Gigabyte motherboard USB boot shortcut key is F12. Press "F12" quickly when you see the startup screen when you turn on the computer.

The shortcut keys to start the USB disk are as follows: ASUS motherboard F8, Lenovo notebook F12, Lenovo desktop F12, Gigabyte motherboard F12, Acer notebook F12, HP desktop F12, MSI motherboard F11, ASUS notebook ESC, Acer _Desktop F12, Biostar motherboard F9, HP notebook F9.

The above is the detailed content of Gigabyte motherboard reinstall system. For more information, please follow other related articles on the PHP Chinese website!