When the computer is turned on, the desktop is black with only the mouse

What should I do if the computer only displays one mouse when it is turned on and the screen is black?

When we see that there is only a mouse on the desktop, we can assume that the browser is not open. If the screen is completely black, it is caused by a software or hardware failure. First, Ctrl Alt Delete key to open the Task Manager window. There is a new task in the lower right corner, click on it. Then a window to create a new task will pop up.

Press Ctrl Alt Del on the keyboard at the same time. Select "Start Task Manager" in the list. "Task Manager" will pop up. Use the mouse to click "File" - "New Task" in the upper left corner menu, and enter "explorer" in the pop-up "Create New Task" dialog box. ” Click “OK”.

When we see that there is only a mouse on the desktop, we can assume that the explorer is not open. If the screen is completely black, it is caused by a software or hardware failure. First, Ctrl Alt Delete key to open the Task Manager window, as shown below. There is a new task in the lower right corner, click on it.

Why does the black screen only show the mouse pointer after the computer is turned on?

1. Because most black screens are basically caused by a certain service in Windows, restarting the computer can solve the black screen. Mouse pointer problem. Method 2: Turn on the computer, long press "shift", select safe mode in the menu, log in normally and open it, then restart the computer, and that's basically it.

2. "After the computer is turned on, the display screen is black and only the mouse is left." This phenomenon means that the system is loading, and you can enter the desktop after the loading is complete. When this situation occurs, it is judged that there is a problem with the system, such as too much system garbage, too much redundancy, or system hardware problems; such as a certain block of memory is damaged, a certain area of ​​the hard disk is damaged, etc.

3. There are two situations when the computer is turned on and only the mouse appears. One is that there is a flashing cursor in the upper left corner, and the mouse can be moved or cannot be moved in the middle. In this case, it can basically be determined that the computer system is booting. If it's broken, it's possible to fix it.

What should I do if the computer screen goes black with only one mouse pointer left?

1. Because most black screens are basically caused by a certain service in Windows, restarting the computer can solve the problem. The black screen only has a mouse pointer. It's a pointer problem. Method 2: Turn on the computer, long press "shift", select safe mode in the menu, log in normally and open it, then restart the computer, and that's basically it.

2. Press the restart button on the computer, and then press and hold F8 on the keyboard. Press the arrow keys on the keyboard to select the first option in safe mode in Figure 2. After entering the desktop, click the Control Panel in Figure 1 and select Uninstall in Figure 2.

3. Press Ctrl Alt Del on the keyboard at the same time. Select "Start Task Manager" in the list. "Task Manager" will pop up. Use the mouse to click "File" - "New Task" in the upper left corner menu, and enter "explorer" in the pop-up "Create New Task" dialog box. ” Click “OK”.

4. After the Samsung computer is turned on, the screen is black and only a mouse arrow is displayed. What to do? Press ctrl alt del to start the work administrator and terminate the applications you installed. If it doesn't work, press and hold the power button for 4 or 5 seconds to force the laptop to shut down, and then restart it to see if it is normal.

When the computer is turned on, only the mouse is on and the screen is always black.

Check the connection: Make sure the display is correctly connected to the computer. Check that the display power cable and video cable are securely connected, and make sure the video cable is connected to the correct video output port. Adjust the display input source: Some displays can choose a different input source, such as VGA, HDMI, or DisplayPort.

② When the computer is turned on, the screen is black and the mouse lights up. It may be that the graphics card, display cable, or monitor are faulty.

(1) If the BIOS interface does not display a black screen, it may be a computer hardware problem. Please bring the machine to the ASUS service center for testing.

Cause of black screen: Black screen caused by software. Sometimes after installing some software or hardware drivers, you may find that after restarting, the computer cannot enter the system and the screen remains black. In this case, the laptop screen is black due to software.

Then click File-New Task, enter msconfig, check the system administrator rights, enter the system configuration interface, click Selective startup, uncheck the load startup items; it is recommended to temporarily uninstall third-party security Test anti-virus software; restart the computer to see if the fault is completely resolved.

The host is normal, which means the power supply is on. If the keyboard light is not on and the mouse is on, it only means that your mouse is connected to a USB interface. USB is powered as long as the motherboard has power. If the keyboard does not work, it is because the motherboard is not working. Of course Because of memory or graphics card.

After the computer is turned on, the display screen is black with only the mouse.

1. First of all, it may be a hardware problem. The hardware itself has too many bad sectors, so only the mouse can display. In this case, you can use a USB flash drive to test the hard drive. If there are too many bad sectors, the only way is to replace the hard drive. Furthermore, it may be that the C drive memory is full. After powering on, the monitor screen is black (only the mouse), as shown in the picture.

2. "After the computer is turned on, the display screen is black and only the mouse is left." This phenomenon means that the system is loading, and you can enter the desktop after the loading is complete. When this situation occurs, it is judged that there is a problem with the system, such as too much system garbage, too much redundancy, or system hardware problems; such as a certain block of memory is damaged, a certain area of ​​the hard disk is damaged, etc.

3. Cause of the fault: There are too many files in the computer and the data is processed incorrectly. Generally, the mouse appears indicating that some of the data is correct. Solution: Press the shortcut key Ctrl Alt Del in the black screen state to enter the Task Manager. Then click on the file, create a new one, and enter explorer in the pop-up Create New Task.

4. After the computer is turned on, the display screen is black with only the mouse arrow. What is going on? This is because the Explorer resource manager has not started. The solution is to start the task manager first, and then manually start the Explorer resource. Manager will solve the problem.

The above is the detailed content of When the computer is turned on, the desktop is black with only the mouse. For more information, please follow other related articles on the PHP Chinese website!