Home >Computer Tutorials >Computer Knowledge >Centos system server setting time is automatically synchronized!
Automatically synchronizing time on the CentOS system server is one of the key steps to ensure the normal operation of the system. The following are brief steps to set the automatic synchronization time of the CentOS system server:
Installing and configuring NTP service
In CentOS systems, NTP (Network Time Protocol) is a common protocol used for time synchronization. Execute the following commands to install and configure the NTP service:
sudo yum install ntp
Enable NTP service
Execute the following command to enable and start the NTP service:
sudo systemctl enable ntpd sudo systemctl start ntpd
Configure NTP server
Open the NTP configuration file /etc/ntp.conf
, and use a text editor to edit:
sudo vi /etc/ntp.conf
Find available NTP server addresses in the file and configure them according to your location and preferences. You can find it at
The website finds an available NTP server address.
For example, add the following line to the configuration file to use a globally available NTP server:
server 0.pool.ntp.orgserver 1.pool.ntp.orgserver 2.pool.ntp.org
Restart the NTP service
Execute the following command to restart the NTP service so that the configuration changes take effect:
sudo systemctl restart ntpd
Verify time synchronization
Use the following command to verify that time synchronization is working properly:
ntpq -p
You will see the NTP servers listed and their status. Make sure a number is displayed in the "Reach" column to indicate that the NTP server is reachable.
Through the above steps, you can set up automatic time synchronization on the CentOS system server. The NTP service will periodically communicate with the configured NTP server to ensure system time accuracy and synchronization.
The above is the detailed content of Centos system server setting time is automatically synchronized!. For more information, please follow other related articles on the PHP Chinese website!