Graphics card power cable dual 8pin

The graphics card power cable 8p is divided into two 8p

8P graphics cards are high-end graphics cards with high power consumption. The power supply needs to come with dual 8P or 8 6P. The latter 6P can be directly plugged into the 6 sockets on the left side of the graphics card, or you can buy a 6P to 8P adapter cable.

The maximum power supply for the graphics card is 25A, *12V, which is equal to 300w. It is still just enough. But don’t just use one 8pin. It is more reliable to use 2 output 8pins.

The power of the power supply may not be enough, and long-term use may cause hardware damage. The graphics card has dual 8p power supplies, which means that the power consumption of the graphics card is very high. The fact that the power supply only supplies power to one 8p graphics card shows that the power of the power supply is not very good.

You can also insert one into two ends. As long as the power supply is enough.

8P graphics cards are high-end graphics cards with high power consumption. The power supply needs to come with dual 8P or 8 6P. The latter 6P can be directly plugged into the 6 sockets on the left side of the graphics card, or you can buy a 6P to 8P converter. wiring. If the power supply only has a single 6P or dual 6P socket, you can still connect it, but basically it won’t turn on and the power is not enough.

First disassemble the computer host, remove the two screws, and lay down the computer gently with your butt facing the direction for easy installation. As shown in the picture, the graphics card slot is on the right side of the fan. Remember to face the butt of the chassis. Remove the fixed bracket as shown in the picture, otherwise the graphics card will be blocked.

Some Rtx2070 graphics cards have only one 8pin power interface, and some have two 8 6pin or 8 8pin, there are...

pin, 8pin means that the graphics card has two power interfaces, one is There are 8pin interfaces and one is a 6pin interface. They need to be plugged in at the same time, otherwise the graphics card will not work. There are also graphics cards with dual 6pin interfaces or single 6pin interfaces. 6pin means six-phase power supply, and 8pin means eight-phase power supply.

It can be used. 6PIN and 8PIN refer to the power supply interface. The 2070 graphics card uses 6 8PIN power supply interface. Just fill the interface on the power supply up. Otherwise, the power supply is insufficient and the computer cannot be turned on. of.

Because there is still an 8pin power supply line missing, if only one 8pin interface is connected, the graphics card may not be able to operate normally.

Of course, if some graphics cards have dual 8pin interfaces, there is no way. You need to have a power supply with two 8pin interfaces. However, this type of graphics card is often a top-level independent graphics card and is expensive, unless it is hardware. Enthusiasts or game developers, ordinary users neither use it nor are likely to buy it.

How to connect the 8pin power supply of graphics card

The power supply of the graphics card can be directly connected from the graphics card power supply line on the power box; if there is no auxiliary power supply line with the graphics card on the power box, After purchasing it yourself and then connecting it, the auxiliary power supply of the graphics card must be fully connected.

2pin is the graphics card power supply interface. A group of 6 2pins corresponds to an 8pin. Just connect both groups. 8 8P graphics cards are high-end graphics cards with high power consumption. The power supply needs to come with dual 8P or 8 6P. The latter 6P can be directly plugged into the 6 sockets on the left side of the graphics card, or you can buy a 6P to 8P adapter cable.

Dual 8-pin graphics card power supply connection: Find the dual 8-pin socket provided by the power supply; insert the corresponding dual 8-pin socket of the graphics card; the dual 8-pin socket of the graphics card has a fool-proof design, so don’t be afraid of inserting it backwards and make sure to insert it firmly. Turn on the computer and see the result. 2pin is the graphics card power supply interface. A group of 6 2pins corresponds to an 8pin. Just connect both groups.

The 8pin interface of the graphics card is composed of 3 power lines with a voltage of 12V and 5 ground wires. An 8-pin module power interface with a driving current not exceeding 167A and a power not exceeding 150W.

The 8-pin power interface of the graphics card is an 8-pin module power interface consisting of 3 12V power lines and 5 ground wires. The drive current does not exceed 4.167A and the power does not exceed 150W. It is an improved version of the +12v4pin interface, providing dual 12V power supply and energy consumption support for high-power multi-core series processors.

, first plug the corresponding 8-pin connector directly into the graphics card, and then use a dual 4D to 8-pin power adapter cable to plug into the other 8-pin connector on the graphics card. 2. After plugging in the 8-pin one, you can use the 6-pin to 6-pin to plug the other 8-pin one into an 8-pin one, which will work just as well.

What does the 8pin interface of the graphics card mean?

The 8pin interface of the graphics card is composed of 3 power lines with a voltage of 12V and 5 ground wires. An 8-pin module power interface with a driving current not exceeding 167A and a power not exceeding 150W.

The 8-pin power interface of the graphics card is an 8-pin module power interface consisting of 3 12V power lines and 5 ground wires. The drive current does not exceed 167A and the power does not exceed 150W.

pin, 8pin means that the graphics card has two power supply interfaces, one is an 8pin interface and the other is a 6pin interface. They must be plugged in at the same time, otherwise the graphics card will not operate. There are also graphics cards with dual 6pin interfaces or single 6pin interfaces. 6pin means six-phase power supply, and 8pin means eight-phase power supply.

6 How to connect 2 graphics card 8pin cable

1. Generally, the power supply cable is 6 2Pin composed of 8Pin. 8pin is originally a combination of 6pin and 2pin. You only need to insert Don't worry about the 6-pin wire. Don't worry about the 2-pin wire. Don't mistake the 8-pin wire for the CPU. The 8-pin one is connected to the motherboard. It is impossible to connect the graphics card without the basic 6-pin, but with 8-pin.

2. 2 is for the 8pin interface, and then the 6pin is disassembled separately, and the 2pin is not needed and plugged into another interface. That's it. This design is because some graphics cards are 6pin*2 and some are single 8pin. There used to be dual 8pin ones.

3. Of course, just connect 2 6 2. You can easily carry a 1000w power supply, and you can carry 3 graphics cards with 6 interfaces.

4. The 8PIN of your power supply must be in 6 2PIN mode. For a graphics card with a 6PIN interface, you only need to use 6PIN out of 6 2PIN, and ignore the extra 2PIN. If the power supply does not have enough 6 to 2 PINs, go to the computer store and buy a double 4 to 6 PIN adapter cable. It only costs a few dollars.

5. 2pin is the graphics card power supply interface. A group of 6 2pins corresponds to an 8pin. Just connect both groups. 8 8P graphics cards are high-end graphics cards with high power consumption. The power supply needs to come with dual 8P or 8 6P. The latter 6P can be directly plugged into the 6 sockets on the left side of the graphics card, or you can buy a 6P to 8P adapter cable.

The above is the detailed content of Graphics card power cable dual 8pin. For more information, please follow other related articles on the PHP Chinese website!