What brand is thermaltake? A must-read for newbies: Thermaltake S500 TG chassis review

php Editor Banana will introduce to you that Thermaltake is a well-known computer hardware brand. Its products cover chassis, radiators and other accessories. Among them, the Thermaltake S500 TG chassis has attracted much attention and provides a good experience for novice users. This article will conduct a detailed review of this chassis to help novice users better understand the brand and product features.

Compared to the more compact and exquisite Mini-ITX cases, mid-tower or even full-tower cases have the characteristics of being larger, heavier, and requiring greater space. These characteristics give Large chassis have large capacity and compatibility that ITX cannot match, and they are not as particular about air ducts and heat dissipation as ITX chassis. 360's high-end water cooling, ventilation performance provided by multiple chassis fans, and a large number of standard-specification design graphics cards are available in the market. ATX chassis has these advantages in meeting the needs of a wider audience than the compact ITX when purchasing, assembling, and running. Therefore, the mainstream DIY in the market today is still ATX mid-tower chassis.

I believe that computer hardware enthusiasts will not be unfamiliar with the brand Thermaltake (Tt, Thermaltake). As a well-known brand company in Taiwan, Thermaltake has made great achievements in the fields of radiators, power supplies, chassis and cooling fans. The Tt S500 TG chassis looks very huge overall, 565 x 240 x 500 mm. The height is only a little shorter than the 20th anniversary high-end chassis LEVEL 20 GT launched in 2018, but the body is slim. At the same time, in addition to Except for the traditional side see-through surface, the other surfaces are made of steel plates. The appearance retains the classic elegant curved lines and modernist design. The clean steel plates are very simple, and the bending treatment at the corners of the frame makes its edges soft, achieving a certain balance in a sense.

Appearance: thick steel plate with rounded corners

The top is lined with various interfaces and buttons. You can see that there are two USB 3.0 Type A and two USB 2.0. It comes with soft rubber dust-proof plugs, which is more considerate; You can see a large area of ​​rubber anti-slip mat at the bottom. When placed normally, there is basically no sliding in the horizontal direction. There is a push-pull rectangular dustproof net. You can see that the front panel is still quite far away from the main steel plate behind it. The space is large, and the front steel plate is the same as the top plate, with fairly dense ventilation holes.

##You can see a pre-installed 12cm chassis fan on the back. There are 8 reusable PCI slots, and this panel is actually compatible with the vertical installation of graphics cards, which we will mention later. , there is a fixing bracket on the outside of the power supply compartment to support tool-less installation. All panels can be removed, and the side panels adopt a no-hole design.

Structure: Manually changeable graphics card installation method

is similar to the 678C of the previous Corsair carbide series , Thermaltake S500 TG also uses a modular design concept in its structure. Both the top panel and the front panel are removable, and because they are made of relatively thick steel plates, they are relatively heavy and feel heavy in the hand. After disassembling the two panels, you can see the dense openings for installing and fixing chassis fans. The S500 TG chassis has better compatibility with fans and water-cooling radiators. The front and top can support two 20cm chassis fans, or 360 or even 420 water-cooled radiator.

The interior of the S500 TG looks more narrow (thin) vertically. In theory, it supports up to ATX motherboards, and the panel installed on the motherboard There are multiple wiring holes for players to manage cables. In terms of internal structure, the modular design of Tt S500 TG is reflected. Thermaltake S500 TG theoretically supports a total of 6 2.5-inch hard drives (4 of which are shared with 3.5-inch hard drives), 2 in the independent power supply compartment and hard drive rack on the front; 2 in the hard drive rack; and 2 hard drives in the back. On the bracket, the 2.5-inch hard drive is fixed with screws.

## There are 3 installation positions for the 3.5-inch hard drive (all can be replaced with 2.5-inch hard drives, and the back position can only be Install 1 3.5-inch hard drive), 2 in the hard drive bay and 1 in the back. The hard drive bracket can move freely in the space above it. The hard drive bracket can be removed, and then some water-cooling kits can be installed in this position. As a reference, in theory, it can support a maximum 360mm water-cooling radiator.

As for the variable-direction PCI box at the rear, we only need to unscrew the screws on the main board and rotate it 90° counterclockwise to complete the deformation, and then purchase the relevant kit for vertical installation of the graphics card. , using the fixed bracket attached to the power supply compartment of the upper chassis, the graphics card can be installed vertically. But unfortunately, I couldn’t unscrew a screw in this area of ​​the Thermaltake S500 TG chassis we got, so I had no choice but to give up the display of the vertical installation of the graphics card.

The chassis comes with a rear 12 cm fan and There is a front-mounted 14cm fan, and the accessory package is in the hard drive bracket, with two packages of screws and a bundle of black ties. The thickness of the front panel and top plate is about 2.2mm, the thickness of the main frame of the box is about 0.9mm, the thickness of the side steel plate is about 1mm, and the thickness of the tempered glass is about 3.8. The space for wiring on the back is wide, and there are Velcro ties that come with it from the factory, which helped us sort it out in advance.

Machine installation and temperature test

Installation, test platform and related instructions

We chose Intel Core i7-9700K as the test platform for this chassis, paired with Gigabyte AORUS Z390 XTREME motherboard, the radiator is Tt Ice Dragon 240 integrated water cooling, the following are the detailed specifications:

During the installation process, due to our I chose the Z390 XTREME motherboard, which has a nominal specification of E-ATX (305 × 271mm). Therefore, the wiring spaces with rubber coverings that come with the chassis cannot pass through most power cables. Of course, the one next door The hole can be used at this time, and the thick motherboard power supply cable is connected from here.

As for the installation of the hard drive, for the 2.5-inch hard drive, remove the bracket and tighten the corresponding screws as mentioned before. The installation is complete; there is a 2.5-inch hard drive slot on the top of the independent hard drive cage. The installation method is the same. The hard drive cage also supports the installation of 2.5-inch hard drives. Slide and pull out the separate bracket, screw on the screws, and connect the wires. Push it back and it's installed. The bracket on the back theoretically supports the installation of two 2.5-inch hard drives. The corresponding screw positions have been marked. The four screw spaces marked "A" in the middle are for 3.5-inch hard drives, and the other eight marked "B" are for 2.5-inch hard drive.

##The installation of the power supply is relatively worry-free. After removing the fixing bracket, the entire power supply compartment is connected to both ends, which is convenient for operation with both hands. There is also a wiring hole next to it, through which the motherboard graphics card can be passed. There are no problems with the power supply cable. There is a large opening on the side and a strip of opening on the top to display the RGB power supply lights. The overall experience is good.

Thermal test results

The test is divided into three parts: standby, simulation game and double baking. First, standby for half Record the temperature every hour; then run the 3DMark FireStrike stress test to simulate the situation in the game, and bake the machine for 20 minutes; then let it stand for half an hour and run the aida64 FPU stress test and the 3DMark FireStrike stress test at the same time and bake the machine for 20 minutes. The room temperature during the test is 26 °C.

From the actual test situation, Intel Core i7-9700K has good performance in such a cooling environment. Its temperature during double baking It is around 85℃. In fact, our use is closer to the simulation game session, and its temperature is about 54.5℃ at this time. The temperature of the graphics card is not high, between 78 and 79 degrees Celsius under high load.

Summary: Good compatibility, modular design is pleasing In fact, the outer panels are all 2.2mm thick, and you can clearly feel its weight when you lift it with one hand. Its modular design is a shining point. The modular hard disk installation concept can take care of users with multiple disk storage needs; the PCI slot can be installed between the horizontal and vertical installation of the graphics card, and consumers only need to prepare the PCIe extension You can experience the vertical graphics card installation mode online. At the same time, the S500 TG also encourages players to make some small modifications by themselves. For example, the 3.5-inch hard drive cage can be removed to install a 360mm water-cooling radiator.

Currently, Thermaltake Thermaltake S500 TG chassis is expected to be launched tomorrow (September 19), with an estimated price of 849 yuan . Interested friends may wish to pay attention.

The above is the detailed content of What brand is thermaltake? A must-read for newbies: Thermaltake S500 TG chassis review. For more information, please follow other related articles on the PHP Chinese website!