Home >Computer Tutorials >Computer Knowledge >How to enter the boot disk
php Xiaobian Yuzai will introduce you to the method of entering the startup disk. A startup disk is a tool that can be used to reinstall the system, repair system failures, or perform system backup. There are many ways to enter the startup disk. Common ones include setting the startup sequence through the BIOS, using shortcut keys to enter the startup menu, or entering advanced startup options through system settings. The specific methods will vary according to different computer brands and operating system versions, but in general, you only need to follow the corresponding steps to successfully enter the boot disk. The following will introduce you in detail various methods and steps for entering the boot disk.
In addition to this friend, others may also have doubts. The editor will share the detailed operation method.
First of all, we need to use the Laomaotao winpe tool to create a U disk boot disk. After the production is completed, insert the USB flash drive into the computer and enter the BIOS setup interface. Please note that different brands of computers may have different methods of entering the BIOS interface. If you don't know how to enter the BIOS interface, you can send me a private message and I will try my best to answer it.
After entering the BIOS interface, switch to Boot. For example, for Lenovo Y480, select UEFI Boot and press Enter to set it to Enabled; for Shenzhou notebook, set the Boot mode select to UEFI under Boot.
But some computer models do not have UEFI options, such as ASUS notebook win8/win10 models without uefi option, Launch CSM is Disabled by default, and Secure Boot is turned on. When Secure boot is turned on, the boot disk, including the uefi boot disk, cannot be recognized, so Secure Boot must be disabled. When CSM is turned on, it indicates Legacy mode, and when it is turned off, it indicates UEFI mode.
After setting, press F10 to save the changes.
You will then enter the winpe interface and open the partition assistant. Convert the target disk where the system needs to be installed to a GPT disk and format the partitions. If the target disk is already a GPT disk, just partition or format it. In addition, before converting the MBR type to the GUID type, you need to delete all partitions and then convert.
How to do it?
Step 1: Click [Hard Disk]-[Convert Partition Table Type to GUID Format], a prompt box will pop up, click [OK].
Step 2: Save the operation in the first step, click [Save Changes]-[Yes].
Step 3: Select the hard disk, click [Quick Partition], and in the pop-up setting window, partition the disk. The number of partitions can be pressed It needs to be adjusted. Pay attention to the 4K alignment of the SSD partition.
After completing the above operations, return to the winpe desktop and open the one-click installation software to install the Ghost system~
learn more
The above is the detailed content of How to enter the boot disk. For more information, please follow other related articles on the PHP Chinese website!