Can Linux increase your disk speed several times? Here are top secret IO optimization tips!

In computer systems, IO operations are one of the most common and most time-consuming operations. For Linux users, IO performance optimization is very important. However, many people do not know how to optimize IO to achieve faster disk read and write speeds. This article will introduce some efficient IO optimization techniques to increase the disk speed of your Linux system several times!

fio is more convenient to use under Linux system, iometer is more convenient to use under window system, Orion is Oracle's IO testing software, which can simulate the reading and writing of Oracle database scenarios without installing Oracle database.

The following is an IO test on SAN storage using the fio tool on a Linux system.

1. Install fio

Method 1: Download the fio-2.1.10.tar file from the fio official website. After decompression, you can use fio after ./configure, make, and make install.

Method 2: Install through yum under Linux system, yum install -y fio

2. [neiqian]fio[/neiqian] parameter explanation

You can use fio -help to view each parameter. For specific parameters, you can view the how to document on the official website. The following is a description of several common parameters

filename=/dev/emcpowerb 支持文件系统或者裸设备，-filename=/dev/sda2或-filename=/dev/sdb
direct=1 测试过程绕过机器自带的buffer，使测试结果更真实
rw=randwread 测试随机读的I/O
rw=randwrite 测试随机写的I/O
rw=randrw 测试随机混合写和读的I/O
rw=read 测试顺序读的I/O
rw=write 测试顺序写的I/O
rw=rw 测试顺序混合写和读的I/O
bs=4k 单次io的块文件大小为4k
bsrange=512-2048 同上，提定数据块的大小范围
size=5g 本次的测试文件大小为5g，以每次4k的io进行测试
numjobs=30 本次的测试线程为30
runtime=1000 测试时间为1000秒，如果不写则一直将5g文件分4k每次写完为止
ioengine=psync io引擎使用pync方式，如果要使用libaio引擎，需要yum install libaio-devel包
rwmixwrite=30 在混合读写的模式下，写占30%
group_reporting 关于显示结果的，汇总每个进程的信息
此外
lockmem=1g 只使用1g内存进行测试
zero_buffers 用0初始化系统buffer
nrfiles=8 每个进程生成文件的数量

3. Detailed explanation of fio test scenarios and report generation

testing scenarios:

100% random, 100% read, 4K

fio -filename=/dev/emcpowerb -direct=1 -iodepth 1 -thread -rw=randread -ioengine=psync -

bs=4k -size=1000G -numjobs=50 -runtime=180 -group_reporting -name=rand_100read_4k

100% random, 100% written, 4K

fio -filename=/dev/emcpowerb -direct=1 -iodepth 1 -thread -rw=randwrite -ioengine=psync -

bs=4k -size=1000G -numjobs=50 -runtime=180 -group_reporting -name=rand_100write_4k

100% sequence, 100% read, 4K

fio -filename=/dev/emcpowerb -direct=1 -iodepth 1 -thread -rw=read -ioengine=psync -

bs=4k -size=1000G -numjobs=50 -runtime=180 -group_reporting -name=sqe_100read_4k

100% order, 100% writing, 4K

fio -filename=/dev/emcpowerb -direct=1 -iodepth 1 -thread -rw=write -ioengine=psync -

bs=4k -size=1000G -numjobs=50 -runtime=180 -group_reporting -name=sqe_100write_4k

100% random, 70% read, 30% write 4K

fio -filename=/dev/emcpowerb -direct=1 -iodepth 1 -thread -rw=randrw -rwmixread=70 -


ioengine=psync -bs=4k -size=1000G -numjobs=50 -runtime=180 -group_reporting -

name=randrw_70read_4k

Result report view:

[root@rac01-node02]# fio -filename=/dev/sdc4 -direct=1 -iodepth 1 -thread -rw=randrw -rwmixread=70 -ioengine=psync -bs=4k -size=1000G -numjobs=50 -runtime=180 -group_reporting -name=randrw_70read_4k_local
randrw_70read_4k_local: (g=0): rw=randrw, bs=4K-4K/4K-4K/4K-4K, ioengine=psync, iodepth=1
...
fio-2.1.10
Starting 50 threads
Jobs: 21 (f=21): [mm_m_m__mmmmmm__mm_m_mmm_mm__m_m_m] [3.4% done] [7004KB/2768KB/0KB /s] [1751/692/0 iops] [eta 01h:27m:00s]
randrw_70read_4k_local: (groupid=0, jobs=50): err= 0: pid=13710: Wed May 31 10:23:31 2017
read : io=1394.2MB, bw=7926.4KB/s, iops=1981, runt=180113msec

clat (usec): min=39, max=567873, avg=24323.79, stdev=25645.98
lat (usec): min=39, max=567874, avg=24324.23, stdev=25645.98
clat percentiles (msec):
| 1.00th=[ 3], 5.00th=[ 5], 10.00th=[ 6], 20.00th=[ 7],
| 30.00th=[ 9], 40.00th=[ 12], 50.00th=[ 16], 60.00th=[ 21],
| 70.00th=[ 27], 80.00th=[ 38], 90.00th=[ 56], 95.00th=[ 75],
| 99.00th=[ 124], 99.50th=[ 147], 99.90th=[ 208], 99.95th=[ 235],
| 99.99th=[ 314]
bw (KB /s): min= 15, max= 537, per=2.00%, avg=158.68, stdev=38.08

write: io=615280KB, bw=3416.8KB/s, iops=854, runt=180113msec

clat (usec): min=167, max=162537, avg=2054.79, stdev=7665.24
lat (usec): min=167, max=162537, avg=2055.38, stdev=7665.23
clat percentiles (usec):
| 1.00th=[ 201], 5.00th=[ 227], 10.00th=[ 249], 20.00th=[ 378],
| 30.00th=[ 548], 40.00th=[ 692], 50.00th=[ 844], 60.00th=[ 996],
| 70.00th=[ 1160], 80.00th=[ 1304], 90.00th=[ 1720], 95.00th=[ 3856],
| 99.00th=[40192], 99.50th=[58624], 99.90th=[98816], 99.95th=[123392],
| 99.99th=[148480]
bw (KB /s): min= 6, max= 251, per=2.00%, avg=68.16, stdev=29.18
lat (usec) : 50=0.01%, 100=0.03%, 250=3.15%, 500=5.00%, 750=5.09%
lat (usec) : 1000=4.87%
lat (msec) : 2=9.64%, 4=4.06%, 10=21.42%, 20=18.08%, 50=19.91%
lat (msec) : 100=7.24%, 250=1.47%, 500=0.03%, 750=0.01%

cpu : usr=0.07%, sys=0.21%, ctx=522490, majf=0, minf=7
IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%

submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
issued : total=r=356911/w=153820/d=0, short=r=0/w=0/d=0
latency : target=0, window=0, percentile=100.00%, depth=1

Run status group 0 (all jobs):
READ: io=1394.2MB, aggrb=7926KB/s, minb=7926KB/s, maxb=7926KB/s, mint=180113msec, maxt=1801

13msec

WRITE: io=615280KB, aggrb=3416KB/s, minb=3416KB/s, maxb=3416KB/s, mint=180113msec, maxt=180

113msec

Disk stats (read/write):

sdc: ios=356874/153927, merge=0/10, ticks=8668598/310288, in_queue=8978582, util=99.99%

io=执行了多少M的IO

bw=平均IO带宽
iops=IOPS
runt=线程运行时间
slat=提交延迟
clat=完成延迟
lat=响应时间
bw=带宽
cpu=利用率
IO depths=io队列
IO submit=单个IO提交要提交的IO数
IO complete=Like the above submit number, but for completions instead.
IO issued=The number of read/write requests issued, and how many of them were short.
IO latencies=IO完延迟的分布

io=总共执行了多少size的IO
aggrb=group总带宽
minb=最小.平均带宽.
maxb=最大平均带宽.
mint=group中线程的最短运行时间.
maxt=group中线程的最长运行时间.

ios=所有group总共执行的IO数.
merge=总共发生的IO合并数.
ticks=Number of ticks we kept the disk busy.
io_queue=花费在队列上的总共时间.
util=磁盘利用率

4. Extended IO queue depth

At a certain moment, there are N inflight IO requests, including IO requests in the queue and IO requests being processed by the disk. N is the queue depth.
Increasing the hard disk queue depth is to make the hard disk work continuously and reduce the idle time of the hard disk.
Increase the queue depth -> Improve utilization -> Obtain peak IOPS and MBPS -> Note that the response time is within an acceptable range,
There are many ways to increase the queue depth. Using asynchronous IO and initiating multiple IO requests at the same time is equivalent to having multiple IO requests in the queue. Multiple threads initiating synchronous IO requests is equivalent to having multiple IO requests in the queue.
Increase the application IO size. After reaching the bottom layer, it will become multiple IO requests, which is equivalent to multiple IO requests in the queue. The queue depth increases.
As the queue depth increases, the waiting time of IO in the queue will also increase, resulting in longer IO response time, which requires a trade-off.

Why do we need to parallelize disk I/O? The main purpose is to improve the performance of the application. This is particularly important for virtual disks (or LUNs) composed of multiple physical disks.
If I/O is submitted one at a time, although the response time is shorter, the system throughput is very small.
In comparison, submitting multiple I/Os at one time not only shortens the head movement distance (through the elevator algorithm), but also improves IOPS.
If an elevator can only take one person at a time, then once everyone takes the elevator, they can quickly reach their destination (response time), but it will take a longer waiting time (queue length).
Submitting multiple I/Os to the disk system at once balances throughput and overall response time.

Linux system to view the default queue depth:

[root@qsdb ~]# lsscsi -l
[0:0:0:0] disk DGC VRAID 0533 /dev/sda

state=running queue_depth=30 scsi_level=5 type=0 device_blocked=0 timeout=30

[0:0:1:0] disk DGC VRAID 0533 /dev/sdb

state=running queue_depth=30 scsi_level=5 type=0 device_blocked=0 timeout=30

[2:0:0:0] disk DGC VRAID 0533 /dev/sdd

state=running queue_depth=30 scsi_level=5 type=0 device_blocked=0 timeout=30

[2:0:1:0] disk DGC VRAID 0533 /dev/sde

state=running queue_depth=30 scsi_level=5 type=0 device_blocked=0 timeout=30

[4:2:0:0] disk IBM ServeRAID M5210 4.27 /dev/sdc

state=running queue_depth=256 scsi_level=6 type=0 device_blocked=0 timeout=90

[9:0:0:0] cd/dvd Lenovo SATA ODD 81Y3677 IB00 /dev/sr0

state=running queue_depth=1 scsi_level=6 type=5 device_blocked=0 timeout=30

Use the dd command to set bs=2M for testing:

dd if=/dev/zero of=/dev/sdd bs=2M count=1000 oflag=direct

Recorded the read of 1000 0. Recorded the write of 1000 0. 2097152000 bytes (2.1 GB) copied, 10.6663 seconds, 197 MB/second

Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util

sdd 0.00 0.00 0.00 380.60 0.00 389734.40 1024.00 2.39 6.28 2.56 97.42

It can be seen that after 2MB IO reaches the bottom layer, it will become multiple 512KB IOs. The average queue length is 2.39. The utilization rate of this hard disk is 97%, and MBPS reaches 197MB/s.
(Why does it become 512KB IO? You can use Google to check the meaning and usage of the kernel parameter max_sectors_kb.) In other words, increasing the queue depth can test the peak value of the hard disk.

5. Detailed explanation of viewing IO command iostat in Linux system

[root@rac01-node01 /]# iostat -xd 3

Linux 3.8.13-16.2.1.el6uek.x86_64 (rac01-node01) 05/27/2017 _x8664 (40 CPU)

Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util

sda 0.05 0.75 2.50 0.50 76.59 69.83 48.96 0.00 1.17 0.47 0.14

scd0 0.00 0.00 0.02 0.00 0.11 0.00 5.25 0.00 21.37 20.94 0.05

dm-0 0.00 0.00 2.40 1.24 75.88 69.83 40.00 0.01 1.38 0.38 0.14

dm-1 0.00 0.00 0.02 0.00 0.14 0.00 8.00 0.00 0.65 0.39 0.00

sdc 0.00 0.00 0.01 0.00 0.11 0.00 10.20 0.00 0.28 0.28 0.00

sdb 0.00 0.00 0.01 0.00 0.11 0.00 10.20 0.00 0.15 0.15 0.00

sdd 0.00 0.00 0.01 0.00 0.11 0.00 10.20 0.00 0.25 0.25 0.00

sde 0.00 0.00 0.01 0.00 0.11 0.00 10.20 0.00 0.14 0.14 0.00

Output parameter description:

rrqms：每秒这个设备相关的读取请求有多少被Merge了（当系统调用需要读取数据的时候，VFS将请求发到各个FS，如

果FS发现不同的读取请求读取的是相同Block的数据，FS会将这个请求合并Merge）

wrqm/s：每秒这个设备相关的写入请求有多少被Merge了。

rsec/s：The number of sectors read from the device per second.

wsec/s：The number of sectors written to the device per second.

rKB/s：The number of kilobytes read from the device per second.

wKB/s：The number of kilobytes written to the device per second.

avgrq-sz：平均请求扇区的大

小,The average size (in sectors) of the requests that were issued to the device.

avgqu-sz：是平均请求队列的长度。毫无疑问，队列长度越短越

好,The average queue length of the requests that were issued to the device.


await：每一个IO请求的处理的平均时间（单位是微秒毫秒）。这里可以理解为IO的响应时间，一般地系统IO响应时间

应该低于5ms，如果大于10ms就比较大了。

这个时间包括了队列时间和服务时间，也就是说，一般情况下，await大于svctm，它们的差值越小，则说明队列时间越

短，反之差值越大，队列时间越长，说明系统出了问题。

svctm：表示平均每次设备I/O操作的服务时间（以毫秒为单位）。如果svctm的值与await很接近，表示几乎没有I/O

等待，磁盘性能很好。

如果await的值远高于svctm的值，则表示I/O队列等待太长，系统上运行的应用程序将变慢。

%util： 在统计时间内所有处理IO时间，除以总共统计时间。例如，如果统计间隔1秒，该设备有0.8秒在处理IO，而

0.2秒闲置，那么该设备的%util = 0.8/1 = 80%，

所以该参数暗示了设备的繁忙程度，一般地，如果该参数是100%表示磁盘设备已经接近满负荷运行了（当然如果是多磁

盘，即使%util是100%，因为磁盘的并发能力，所以磁盘使用未必就到了瓶颈）。

Through this article, we learned how to improve the disk read and write speed of Linux systems through some efficient IO optimization techniques. These techniques include using the IO scheduler, disabling unnecessary services, adjusting file system parameters, etc. In the process of optimizing IO performance, please be careful and choose the most suitable optimization solution according to your needs. The optimized system will bring a faster and smoother disk reading and writing experience, improve your work efficiency, and better meet your needs.

The above is the detailed content of Can Linux increase your disk speed several times? Here are top secret IO optimization tips!. For more information, please follow other related articles on the PHP Chinese website!