How to log in to the router 192.1682.1 Must read: How to log in to the router management page

php editor Xiaoxin will introduce to you how to log in to the router management page, especially for the common login address 192.1682.1. When we need to set up the router or check the network status, we first need to log in to the router management page. This article will explain in detail how to log in to 192.1682.1 correctly and help you easily manage and configure the router. Whether you are a novice or an experienced user, you can get practical tips and steps from this article to make your network settings more convenient and faster.

Use a network cable to connect any LAN port on the computer to the router. If the indicator light of the LAN port connected to the computer does not light up, please make sure the network cable is firmly connected or replace the network cable. The following:

Of course, you can also log in to the interface through a wireless connection. Please use your mobile phone or laptop to connect to the router's network signal. The router's original default signal setting is TP-LINK_XXXX. If you have set the router's network signal before, please connect to the set signal.
2. Check the management address on the router cover label
Look at the label on the back of the router cover to find the management page or management IP. This address is the address used to log in to the router. The label location is as follows:

Pay attention to the label, you can see tplogin.cn or 192.168.1.1, this address is is the management address.

It should be noted that if the router address is 192.168.1.1 and you have changed the management address before, please use the changed one address to log in. You can check the changed address based on the gateway IP obtained on the computer. You can refer to: How to check the IP address obtained on the computer? .
3. Enter the router management address in the browser
After determining the router management address according to the previous step, open IE, Google, Firefox, 360 and other browsers, clear the address bar and enter the label The management address queried on. As shown below:

4. Enter the router’s management login password
If your router has just been purchased and is in original factory condition , you must set a router management login password, please follow the prompts to set it. If only a login password is required, enter the router's administrative login password and click "Clear". If you forget your password, please refer to: What should you do if you forget your router’s login name and password? .

For older versions of routers, it is required to enter the login name and password. Please enter admin respectively, as follows:

Reminder: There is no response when clicking the login/confirm button, the login interface does not display detailed information, or you are repeatedly reminded to enter the login password, please change the computer to browse. device to try.
5. Login successful
Successfully log in to the router management page. On the management page, you can query wireless passwords, set dial-up connections and network speed limits, WDS bridging, and a series of other functions.

 

The above is the detailed content of How to log in to the router 192.1682.1 Must read: How to log in to the router management page. For more information, please follow other related articles on the PHP Chinese website!