Home  >  Article  >  System Tutorial  >  Solution to the problem of ghosting and blurring on win7 display

Solution to the problem of ghosting and blurring on win7 display

WBOY
WBOYforward
2024-01-26 11:21:331038browse

win7显示屏模糊有重影怎么办 win7显示屏模糊有重影解决方法

php Xiaobian Xigua will introduce to you how to solve the problem of blur and ghosting on the Win7 display. Win7 is a widely used operating system, but sometimes we may encounter problems with blurry or ghosting on the display, which will affect our experience. Fortunately, solving this problem isn't complicated. In this article, we will provide you with some simple and effective methods to solve the problem of blur and ghosting on the Win7 display, allowing you to regain a clear display effect.

Win7 display screen is blurry and has ghosting solutions:

1. First, bring up the display’s settings menu interface and check whether the text on the display’s settings menu has smearing. If so, it proves that the monitor is faulty and you need to repair the monitor directly. If there is no ghosting in the monitor's settings menu, there should be no problem with the monitor itself. Go to the following steps to continue troubleshooting. (The buttons to call up the setting menu are different on different displays. Please find it yourself. The interface is as shown below:)

2. Check whether the monitor’s data cable (usually VGA, DVI or HDMI) is folded or blocked. If there are other objects squeezing, unfold the folded and squeezed parts and check whether the ghosting smear on the monitor is resolved.

3. Slowly twist and turn the plug of the monitor data cable, including the plug connected to the computer host and the plug connected to the monitor. While twisting and turning, observe whether the display effect of the monitor is improved. If so, , directly replace the data cable.

4. After replacing the monitor data cable, if the problem of ghosting and smearing still exists, it is a problem with the monitor or the computer host. At this time, I recall that when I twisted and turned the plug of the monitor data cable, did it get better when I twisted and turned the plug on the monitor end, or did it get better when I twisted and turned the plug on the computer host end. If it is the former, it means that the monitor port may be loose or deformed. Repair the monitor, or replace it with another type of port for connection. If it is the latter, it means that the data cable port of the computer host's graphics card or motherboard is loose or deformed. Repair the motherboard or graphics card, or replace the connection with another type of port.

At the same time, it is very likely that the port is not loose and deformed, but that there is a problem with the circuits of the monitor, graphics card, and motherboard. Therefore, if you do not have a certain foundation in computer repair and the problem of real-life smearing and ghosting still exists after replacing the data cable, it is recommended that you send it directly for repair.

The above is the detailed content of Solution to the problem of ghosting and blurring on win7 display. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:winos.vip. If there is any infringement, please contact admin@php.cn delete