Seeking to provide a complete list of CAD instructions

Who can provide all the instructions for CAD

CAD commands: rec space rectangle.square; ro space rotation; z space selected zoom

e space delete; ex space stretch; s space zoom ratio

z Space e Space > Show all; z Space a Space > Full screen zoom

z space p space >return to the previous zoomed task; pl space pl line

l space straight line; c space circle; a space arc; di space measure straight line distance

li space the entire graphic information; la space layer p space small hand

z space space scale and small hand; f space chamfer; ml space ml line

mirrtext space mirror circle; dxfout export closed shape; AR: array

pl space j space close figure; tr space trim; x space explode

B: Definition block; D: Dimension explorer; F: Round; G: Opposite combination

H: Fill; I: Insert; S: Stretch; T: Text input

W: Define the block and save it to the hard disk; L: Linear line; M: Move; V: Set the current coordinates

U: Resume the last operation; O: Offset; F1: Get help

F2: Realize switching between drawing window and text window; F3: Control whether to realize automatic object capturing

F4: Digitizer control; F5: Isometric plane switching

F6: Control the display mode of coordinates on the status line; F7: Grid display mode ro space rotation

ex space stretch; z space a space > full screen zoom; pl space pl line

c space circle; a space arc; la space layer

f space chamfer; dxfout export closed shape; tr space trim; D: Dimension Explorer

I: Insert; S: Stretch; L: Linear; M: Move; O: Offset

F3: Control whether to implement automatic object snapping surface switching

F6: Control the display mode of coordinates on the status line; F-style control

F8: Orthogonal mode control; F9: Grid snap mode control

F10: Polar mode control; F11: Object tracking control

Ctrl B: Grid snap mode control (F9); Ctrl C: Copy the selected object to the clipboard

Ctrl F: Control whether to realize automatic object snapping (f3); Ctrl G: Control the grid display mode (F7)

Ctrl J: Repeat the previous command; Ctrl K: Hyperlink; Ctrl N: Create a new graphic file

Ctrl M: Open options dialog box

AA: Measurement area and perimeter (area); AL: Alignment (align); AP: Load *lsp program system

AV: Open the view dialog box (dsviewer); SE: Open the phase automatic capture dialog box

ST: Open the font setting dialog box (style); SO: Draw the two-sided surface (2d solid)

SP: Pinyin verification (spell); SC: Scaling ratio (scale); SN: Grid snap mode setting (snap)

DT: Text setting (dtext); DI: Measure the distance between two points; OI: Insert external phase

Ctrl 1: Open the properties dialog box; Ctrl 2: Open the image explorer; Ctrl 6: Open the image data atom

Ctrl O: Open the image file; Ctrl P: Open the print dialog box; Ctrl S: Save the file

Ctrl U: Polar mode control (F10); Ctrl v: Paste the contents of the clipboard

Ctrl W: Object tracking control (F11); Ctrl X: Cut the selected content

Ctrl Y: Redo; Ctrl Z: Cancel the previous step

All CAD drawing shortcut key commands

Go to the library to view the complete content>

Content comes from user: Jinxin Technology and Educational Information Technology Service Platform

Read between the Lines

CAD drawing shortcut key command usage

1. Rectangle: REC and press Enter (shift 2) to define the (0,0) point coordinates and enter the size in

Define the coordinates of another point. )

2. Zoom in or out: SC and press Enter. Enter the magnification or reduction factor and press Enter

3. Global display: Z Enter E Enter, equal distance offset: O Offset distance Enter

4. Measurement size: di Enter,

Straight line: L Enter

5. Set object capture: ctrl right mouse button

6. Move: M moving distance Enter,

Copy: CO Enter

7. Continuous copying: CO Enter M Enter

8. Trim line: tr Enter twice

Extension cord: ex Enter twice

9. Continuous trimming: tr Enter twice F Enter

10. Continuous extension: ex Enter twice F Enter, input font: T Enter

11. Equal segment: div Enter the number of equal segments and press Enter

12. Polygon: POL Enter the number of sides and press Enter

13. Circle: C Enter radius or diameter Enter, Ellipse: EL Enter

14. Fill: BH and press Enter (use the overall shape for the selected object, and use any shape for the picking point)

15. Mirror: Mi Enter, line attribute: MO Enter, multi-line segment: PL Enter

16. Measure perimeter and area: Li and press Enter (the graphic must be a complete graphic. Otherwise, use PL

Only when the figure is surrounded into a complete figure can the perimeter and area be measured. )

17. Explode: X Enter

Building block: B Enter

18. Rotate RO and press Enter

Stretch: S Enter

19. Chamfer: F Enter (input radius R),

Matrix: AR Enter

Feel free to do what you want

Read between the Lines

20. Linear scale: LTSCALE and press Enter

Format brush: Ma press Enter

21. Change line width: PE and press Enter

Conversion of different files: Ctrl and Enter

22. Annotation style: D and press Enter (set text height to 2.4, key

The most complete CAD commands

Drawing size: unit MM (millimeters)

A0 - 1189x841

A1 - 841x594

A2 - 594x420

A3 - 420x297

A4 - 297x210

Drawing tools:

L: Straight line XL: Construction line

PL：Polyline POL：Polygon

REC: Rectangle A: Arc

C: Circle SPL: Spline

EL: Ellipse I: Insert block

B: Create block PO: Point

H: Fill GD: Gradient

REG：area TB：table

MT: multi-line text T: single-line text

Modification tools

E: Delete CP: Copy

MI: Mirror O: Offset

AR: Array M: Move

RO: Rotate SC: Zoom

S: Stretch TR: Trim

EX: Extend BR: Interrupt

J: Merge CHA: Chamfer

F: Fillet X: Explode

U: Give up PE: Modify polyline

lengthen: stretch, [increment, percentage, all, dynamic]

Annotation Tool

DLI: linear annotation DAL: alignment

DIMORD: coordinate label DIMRAD: radius label

DJO: Bending mark DDI: Diameter mark

DAN: Angle annotation QDIM: Quick annotation

DBA: Baseline Annotation DCO: Continuous Annotation

LE: Quick lead-out TOL: Tolerance marking

DCE: circle center mark DED: edit label

D: Annotation style

Query tool

DI: Distance AA: Area (area)

LI: List ID: Anchor

Zoom tool

Z: Window zoom Z Enter O Enter: Object zoom

Z Enter A Enter: Zoom all Z Enter E Enter: Range zoom

Z Enter P Enter: Zoom to the previous one

Drawing status

F9: Capture F7: Delete frame

F8: Orthogonal F10: Polar axis

F3: Object Capture F11: Object Tracking

F2: Text window

panel

CTRL 1: Properties Panel CTRL 2: Design Center

CTRL 3: Tool Palette CTRL 5: Information Palette

CTRL 8: Quick Calculator CTRL 9: Command Line

CTRL 0: Clear screen CTRL P: Print

LA: Layer Manager

other:

PR: Feature TRACE: Line width

FILL: Fill ML: Multiline

Command—CP: Polygon Selection WBLOCK: Write Block

ALL: Select all DELOBJ (0) 2D reserved (1) not reserved

LTS: Linear scaling thickness: Set the thickness of the two-dimensional object

facetres:grid precision

All CAD commands?

ST(text style)

LA(Layer **** operation)

LT(Linear)

LTS(Linear Scale)

LW(line width)

UN (graphic unit)

ATT (attribute definition)

ATEEdit properties)

BO (filled boundary creation, including creation of closed polylines and regions)

EXP (output files in other formats)

IMP (input file)

OP (custom CAD settings)

PRE (Print Preview)

PRINT(Print)

PU(Purge)

REN(Rename)

SN(Snap to Raster)

DS (Set Polar Tracking)

OS(Set capture mode)

PRE (Print Preview)

TO(Toolbar)

V (named view)

AA(query area)

DI (query distance)

LI (display graphic data information) PO (point)

L(straight line)

XL(ray)

PL(polyline)

ML(Multi-Line)

SPL (spline curve)

POL (regular polygon)

REC(rectangle)

C(circle)

A(Arc)

DO(circle)

EL(Ellipse)

MT (multiline text)

DT (single line text)

B (Definition block internal block)

W (definition block external block)

I (insert block)

SO (two-dimensional filling)

ME (equal division)

DIV (definite equal division)

BH(fill)

HE (modify filling)

TRACE(broad line)

FILL fill and wide line show/hide switch CO (copy)

MI(mirror)

AR(array)

O(Offset)

RO(Rotation)

M(Mobile)

E(delete)

X(decomposition)

TR(Trim)

EX(Extension)

S(Stretch)

LEN (straight line, arc elongation)

SC (proportional scaling)

BR(interruption)

CHA(chamfer)

F (rounded corners)

PE (polyline editing)

ED(edit text)

JOIN (straight line merge)

DLI (straight line label)

DAL (Alignment Annotation)

DRA (Radius Annotation)

DDI (Diameter Dimension)

DAN (angle annotation)

DCE (Circle Center Marking)

DOR (coordinate annotation)

TOL (annotation of geometric tolerance)

LE (quickly elicit annotations)

DBA (Baseline Annotation)

DCO (continuous labeling)

D (Dimension style)

DED (Editorial Dimension) REG (Region)

UNI (Union)

SU (subtraction set)

IN(Intersection)

INF(interference)

P(Pan)

Z Space Space, real-time zoom

Z, partial zoom

Z P Return to the previous view

Z EZoom the whole picture

AV window roaming

RE graphic reproduction

The above is the detailed content of Seeking to provide a complete list of CAD instructions. For more information, please follow other related articles on the PHP Chinese website!