This article will introduce the relevant content of Mac reinstalling the hard disk that cannot read 6. I hope it will be helpful to you. Please read on.
Solution to the problem that the disk cannot be found when reinstalling the Apple Mac computer system
1. Open the Control Panel and click Device Manager to view. See if you can find the mechanical hard drive. If you can't, it means the mechanical drive is not mounted.
The solution is as follows: Hold down the option command r key during restart, connect to Wi-Fi and download the network recovery disk. Once the download is complete, open Disk Utility, check if the disk exists and select the individual partitions. Select Mac OS Extended Journaled, click Options, select GUID Partition Table, and click Apply. After exiting Disk Utility, click Install Mac OS.
When restarting your Mac, you can press the Command+R or Command+Option+R keys to enter the OSX utility. If these key combinations don't work, you can try shutting down your computer and then turning it back on by holding down the Command + Option + R keys until the globe icon appears on the screen. This will allow you to enter recovery mode and proceed accordingly.
4. After entering the BIOS setting interface, find the relevant options, which may vary depending on the host. Once you find the option, press the F10 key on your keyboard, then select "YES" and press Enter to confirm save and exit. Next, the host will automatically reboot. Finally, reinstall the operating system in the normal way. According to the theoretical situation, this can solve the problem of not being able to find the hard disk.
How to solve the problem of Mac not recognizing the external hard drive? Ask for the method
The specific method is as follows: If this prompt appears after booting, it means that the SSD has been successfully connected. Click Initialize and open Disk Utility. Find the SSD in Disk Utility and the status will show as uninitialized.
The solution to this problem is to use Disk Utility to mount the removable hard drive into the Mac system. If your mobile hard drive is in NTFS format, the writing operation cannot be performed because the Mac system cannot write to this format. At this time, you can try to change the hard disk format to a file system supported by Mac to solve this problem.
The steps to download the Mac version and download the Win version are as follows: scan first, select the partition where data is lost, and then use EaseUS Data Recovery Wizard for Mac Pro to scan. Next is preview, double-click to open the file to preview the file contents.
Try to use the disk utility that comes with your Mac computer to view the mobile hard drive icon. To open Disk Utility, press the F4 key, select "Others" and then "Disk Utility". However, I ran into a problem, Daisy kept spinning and couldn't find my portable hard drive.
What to do if the Mac hard disk data cannot be read
1.) Click the ntfs for mac icon. 3): The following picture appears. Check the access permissions and click Settings to start. 4): Open the inserted hard disk. Now the mac can recognize the mobile hard disk, and we can do any operation on the data in the hard disk.
2. First: If it cannot be displayed on an Apple computer, you can actually find a Windows computer and connect the mobile hard disk to the USB interface. Then it can be displayed as follows. The mobile hard disk and U disk are displayed in different locations. They are displayed in the local system.
3. Search on Baidu to download and install NTFS For Mac15, click Mac System Preferences, open the software; then insert the mobile hard drive, NTFS For Mac will automatically recognize the NTFS partition of the mobile hard drive; this way you can The hard disk is performing operations such as reading and writing.
4. Today, the editor will share the solution to the problem that the hard disk cannot be recognized after the Mac computer is installed! The specific method is as follows: This prompt appears when you turn on the computer, indicating that the SSD connection is successful. At this time, click Initialize... to open Disk Utility.
What should I do if the hard drive cannot be recognized by the Apple computer MAC?
1. Mac cannot recognize the external hard drive. If your Mac cannot recognize the external hard drive, please calm down and check first. The operating condition of the external hard drive to choose the appropriate remedy.
2. First: If it cannot be displayed on an Apple computer, you can actually find a Windows computer and connect the mobile hard disk to the USB interface. Then it can be displayed as follows. The mobile hard disk and U disk are displayed in different locations. They are displayed in the local system.
3. This prompt appears when booting, indicating that the SSD connection is successful. At this time, click Initialize... to open Disk Utility. Find the SSD in Disk Utility and its status will be displayed as uninitialized.
4. This kind of failure mostly occurs on the connecting cable or IDE port. The failure rate of the hard disk itself is very small. You can perform replacement tests by re-plugging and unplugging the hard disk cable or changing the IDE port and cable. The problem can be easily solved. Find the fault quickly.
5. Check whether the mobile hard drive is correctly inserted into the Mac computer. Check whether the mobile hard disk has power. The power supply may be insufficient. Check whether the USB data cable connected to the mobile hard disk is damaged. It may be caused by a system failure. Restart your Mac computer to see if it can be recognized normally.
Tutorial on solving the problem that the computer cannot read the disk when the Mac is turned on after installing the SSD
This prompt appears when the computer is turned on, indicating that the SSD connection is successful. At this time, click Initialize... to open Disk Utility. Find the SSD in Disk Utility and its status will be displayed as uninitialized.
Solution: Press option command r when restarting, connect to wifi to download the network recovery disk, after downloading, click Disk Utility-Partition-check here to see if there is a disk, single partition-macos extended journal-option-guid partition table (I remember this one) - Application. After exiting Disk Utility, click Install macos.
Solution: Format the disk and set the disk format to exfat. If there is data in the disk that needs to be saved, you can first insert the removable disk into a Windows computer, copy the data, and then insert it into a Mac computer for formatting.
The optical drive cable may be broken. 2. The optical drive bay may have insufficient power supply. You need to buy a bay that supports power supply for the optical drive bay. . I've encountered this before, don't buy the gray aluminum foil bracket, there's a problem with the power supply.
Conclusion: The above is a summary of answers related to Mac reinstallation hard disk cannot be read 6 compiled by this site. I hope it will be helpful to you! If your problem is solved, please share it with more friends who care about this problem~
The above is the detailed content of Unreadable Mac hard drive cannot be read in Windows after reinstalling. For more information, please follow other related articles on the PHP Chinese website!

Macs are reliable and trustworthy, but like any computer, they’re prone to errors. It is a nightmare booting up your computer to get your Mac stuck on Apple logo. For iMacs, you may see the spinning wheel cursor or a frozen loading ba

Learn about the energy-saving modes of Mac: Sleep, Sleep, Safe Sleep and Standby You may have noticed that your Mac will go to sleep after a period of inactivity. However, Apple has developed more than one energy-saving model for its computers. This article will take you through all these modes and show you how to switch between them. This article will discuss how to make your Mac hibernate and how to change your Mac's sleep settings with: 4 Mac energy-saving modes The status of a Mac while sleeping How to change the sleep mode of your Mac Mac energy saving mode 1. Mac sleep mode Putting the Mac in Sleep Mode keeps its RAM powered, which allows the Mac to wake up quickly and resume work. Normally, Macs will take a while
![How to create an app in 2025: My step-by-step guide [no code]](https://img.php.cn/upload/article/001/242/473/174554515174947.jpg?x-oss-process=image/resize,p_40)
Create your own app from scratch: a complete guide for 2025 summary: Concept: Verify with Google Trends. Build: Use code-free tools such as SwiftyLaunch, or use Swift for encoding. Tips: Use TypingMind to assist in writing application descriptions. Want to know how to create your own application? Then continue reading! This guide will walk you through every step from conception to listing the app store. Ready? Accelerate iOS application development Enter the details, select the required functions, and SwiftyLaunch will generate the code for you. Available on Setapp. Free trial Security test How to do it in 2025

Encountering the dreaded prohibitory symbol (a circle with a line through it) on your Mac during startup? This indicates a problem with your macOS installation, likely due to incompatibility or corruption. Don't panic; this guide offers several sol

Unwanted browser toolbars can be a nuisance, slowing down your browsing and potentially compromising your security. This guide shows you how to remove them from Safari, Google Chrome, and Mozilla Firefox on your Mac. Remember to back up your Mac wi

macOS Sonoma vs. Sequoia: A Detailed Comparison and Upgrade Guide Choosing between macOS Sonoma and Sequoia? This comprehensive guide highlights key differences and helps you decide which operating system best suits your needs. While both offer rob


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

WebStorm Mac version
Useful JavaScript development tools

mPDF
mPDF is a PHP library that can generate PDF files from UTF-8 encoded HTML. The original author, Ian Back, wrote mPDF to output PDF files "on the fly" from his website and handle different languages. It is slower than original scripts like HTML2FPDF and produces larger files when using Unicode fonts, but supports CSS styles etc. and has a lot of enhancements. Supports almost all languages, including RTL (Arabic and Hebrew) and CJK (Chinese, Japanese and Korean). Supports nested block-level elements (such as P, DIV),

EditPlus Chinese cracked version
Small size, syntax highlighting, does not support code prompt function

DVWA
Damn Vulnerable Web App (DVWA) is a PHP/MySQL web application that is very vulnerable. Its main goals are to be an aid for security professionals to test their skills and tools in a legal environment, to help web developers better understand the process of securing web applications, and to help teachers/students teach/learn in a classroom environment Web application security. The goal of DVWA is to practice some of the most common web vulnerabilities through a simple and straightforward interface, with varying degrees of difficulty. Please note that this software

SublimeText3 English version
Recommended: Win version, supports code prompts!
