This article aims to introduce how to modify read-only files on Mac. I hope to be helpful. Please read on.
How to set the wps file on Mac to be read-only and cannot be modified by others?
Find the WPS file that needs to be modified on the desktop. Click to open the file and enter the document editing page, as shown in the figure below.
Take the WPS form as an example. First create a new form and enter any text. Next, click the "Review" option on the toolbar and select "Protect Sheet." Enter the password in the pop-up window and click "OK". After entering the password again, click "OK". Finally, just save the document on your desktop.
First, open the document you want to encrypt. In the WPS table at the top left, click Open File. In the file information, select the file encryption option. Here you can set open and modify permissions. If you set an open permission password, others can open the document only after entering the password. If you set a modify permission password, others can view the document in read-only mode.
Mac Apple computer, the CAD file sent to me by a colleague cannot be modified after opening, and it prompts read-only mode, this...
First double-click to open the computer For the cad file on the desktop, enter the editing graphic document, a prompt will pop up, click the Yes button, find the original file you just opened on the desktop, right-click the file, and in the pop-up menu, select the properties menu item at the bottom.
Open the property page, right-click the CAD file to enter the "Properties" page. Find the read-only item and find the "read-only" function item in the properties. Cancel read-only, uncheck the read-only option, and click "Apply" to switch to edit mode.
Make sure to set change permissions before sending the file so that the recipient can modify the file. Alternatively, you can save the CAD file in PDF format so the recipient can read the file but not modify it.
First, find the Word file that you want to cancel the read-only mode on your computer, right-click and select it. Then, select "Properties" in the right-click menu to open the "Properties" settings dialog box. Uncheck the "Read Only" option in the dialog box.
Find the arrow position in CAD and when saving it as a picture, click the left button and a dialog box will pop up. Modify the file name in the dialog box (different from before), select the save path, and then click Save to save the file successfully.
The first method is to open the "Show Profile" of the hard disk, and then change the read-only mode to read-write mode. This sets access permissions for all files and folders on your Mac system, including the hard drive. Usually, if the file is set to "read-only", you only need to change the hard disk permissions to solve the problem.
How to release read-only mode in Excel under mac?
1. The details are as follows. Open the file, select [No] in the prompt box, then click [File]-[Save As]-[Tools]-[General Options], uncheck [Read-only recommended] and save to delete the prompt.
2. Scroll to the bottom and there is Sharing and Permissions, unlock and enter the administrator account and password, add admin super administrator, select read and write, and then you can unblock the read-only file.
3. Method 1: Save as a new file. Open the Excel file in read-only mode. In an Excel file, click File (usually in the upper left corner). Select the Save As option.
4. The method to cancel the read-only mode of excel is as follows: Tools/materials: ASUS P552SJ, win10, Excel2108. Find the document you want to cancel read-only and right-click the excel document. At the bottom of the page that pops up, click Properties. Check off Read Only and click OK to cancel the read-only mode of the document.
5. Regarding the method of canceling read-only mode in EXCEL, first we open the worksheet with read-only mode set. After opening, the dialog box as shown in the figure will pop up. At this time, we click the "No" button.
6. Find the document you want to cancel read-only and right-click the excel document. At the bottom of the page that pops up, click Properties. Check off Read Only and click OK to cancel the read-only mode of the document. If Excel is locked, you can unlock it by going to your computer's Task Manager and closing it.
How to cancel file read-only mode
1. Turn on the computer, find the office software on the computer, right-click to open it, and click on the file. In the file interface, find and click [Save As]. Select [Select] on the pop-up window, click [General Options] in the toolbar, and then uncheck [Read-only recommended].
2. First, find the Word file that you want to cancel the read-only mode on your computer, right-click and select it. Then, select "Properties" in the right-click menu to open the "Properties" settings dialog box. Uncheck the "Read Only" option in the dialog box.
3. Right-click the file or folder you want to change and select the "Properties" option. In the Properties window, find the General tab and uncheck the Read-only property. If you want the changes to apply to all subfiles and subfolders in the folder, click the Advanced tab.
How to modify the file read and write permissions on Mac
The first step is to turn on the Mac, and then right-click the folder you want to modify the permissions. In the second step, when you come to the pop-up window shown below, click the Show Introduction option. Step 3: On the folder introduction page shown below, click the triangle icon to the left of Sharing and Permissions.
The first method is to open the "Show Profile" of the hard disk, and then change the read-only mode to read-write mode. This sets access permissions for all files and folders on your Mac system, including the hard drive. Usually, if the file is set to "read-only", you only need to change the hard disk permissions to solve the problem.
Open Finder, find the folder you want to modify permissions, and open the file information dialog box. Two ways to open: right-click the folder and select "get info". Use "ctrl i".
Conclusion: The above is a summary of the answers to the related content of modifying read-only files on mac compiled by this site. I hope it will be helpful to you! If your problem is solved, please share it with more friends who care about this problem~
The above is the detailed content of How to change file to read-only attribute on Apple computer. For more information, please follow other related articles on the PHP Chinese website!

ip与mac绑定是指将特定的IP地址与特定的MAC地址关联起来,使得只有使用该MAC地址的设备才能够使用该IP地址进行网络通信。ip与mac绑定可以防止被绑定的主机的IP地址不被假冒,前提条件:1、MAC地址是唯一的,并且不可假冒;只能绑定与路由器直接相连的网络上的主机(也就是主机的网关在路由器上)。

mac版下载的意思是当软件在选择安装时,选择MAC版下载;Windows版和MAC版是两个不同的操作系统,所以大多数软件在选择安装的同时需要选择Windows版还是MAC版。

mac鼠标滚轮相反的解决办法:1、打开mac电脑,点击屏幕的苹果标志,然后选择“系统偏好设置”;2、在“系统偏好设置”窗口中,选择“鼠标”;3、在“鼠标”窗口中,将“滚动方向:自然”前面的勾去掉即可。

显示器关闭时如何防止 Mac 休眠如果您希望 Mac 显示器能够在整个计算机不进入睡眠状态的情况下关闭,请在此处进行适当的设置调整:下拉 Apple 菜单并转到“系统设置”转到“显示”点击“高级...”切换“防止显示器关闭时电源适配器自动休眠”的开关现在 Mac 显示屏可以关闭,同时防止 Mac 本身进入睡眠状态。这可能主要与 Mac 笔记本电脑用户相关,但即使是那些没有 MacBook 的用户也可能会发现该功能很有用。

修复 SMB 文件共享在 MacOS Ventura 中不起作用的问题从 Apple 菜单打开 Mac 上的“系统设置”应用程序转到“常规”,然后转到“共享”找到“文件共享”的开关并将其关闭通过转到 Apple 菜单并选择重新启动来重新启动 Mac重新启动后,返回共享系统设置面板并将“文件共享”重新设置为打开位置像往常一样恢复文件共享,它应该按预期工作如果 MacOS Ventura Mac 与另一台 Mac 或设备之间的文件共享突然再次停止工作,您可能需要在几天后或随机重复此过程。

mac的shift键是fn键上方、caps lock键下方的一个键,该键在键盘最左侧,由右下往上数第2个键;shift键是键盘中的上档转换键,可以通过“Ctrl+Shift”组合键来切换输入法。

mac克隆全称mac地址克隆,是固化在网卡上串行EEPROM中的物理地址,通常有48位长。mac克隆一般应用在路由器上,用户在用电脑直接拨号上网,后来又加了个路由器,通过路由器来实现多台电脑同时上网,这时要用到mac地址克隆了,就是把当前的电脑的mac地址克隆到路由器中去,因为运营商是把你的电脑mac地址绑定你的账号的,所以得克隆以后才能用。

mac解压rar的软件:1、The Unarchiver,是一款完全免费、小巧,而且非常易于使用的压缩、解压缩小工具;2、Keka,是一款免费、实用的压缩、解压缩工具,支持解压缩RAR格式的压缩包;3、360压缩大师,是一款免费的压缩、解压缩软件,完全支持RAR文件解压;4、MacZip,支持包括RAR在内的超过20种压缩格式的解压;5、BetterZip;6、FastZip。


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

SublimeText3 English version
Recommended: Win version, supports code prompts!

SAP NetWeaver Server Adapter for Eclipse
Integrate Eclipse with SAP NetWeaver application server.

WebStorm Mac version
Useful JavaScript development tools

SublimeText3 Linux new version
SublimeText3 Linux latest version

MinGW - Minimalist GNU for Windows
This project is in the process of being migrated to osdn.net/projects/mingw, you can continue to follow us there. MinGW: A native Windows port of the GNU Compiler Collection (GCC), freely distributable import libraries and header files for building native Windows applications; includes extensions to the MSVC runtime to support C99 functionality. All MinGW software can run on 64-bit Windows platforms.
