How to repair a bricked phone without a computer

How to save a brick phone without a computer

1. There is no obvious response from the connection software when the perfectly flashed phone is turned into a brick.

2. Click the "Brick Repair" button at the top of the page, select a supported mobile phone brand, and then a dialog box will pop up asking whether to save the phone from being bricked, and click "OK".

After clicking "Confirm", the software will immediately prompt you to enter repair mode manually. The method of entering repair mode varies from phone to phone, so be sure to follow the software's instructions.

After the operation is completed, the perfect flash software will automatically start the brick rescue process. This process usually takes about 15-20 minutes, depending on your internet speed. The progress of rescuing bricks will be clearly displayed on the running page of the software. No other operations are required, just wait patiently.

As the repair toolbar gradually advances, you will see the "Repair Successful" page. After clicking "Finish", the phone will automatically restart without any other operations.

After the phone is successfully restarted, the brick repair process is successfully completed!

What to do if your Android phone becomes bricked after failed flashing

Use computer software to flash:

Currently, the more well-known Android flash tools include Flash Wizard, Flash Master, and Bell Pepper Flash, etc. I recommend you download the Flash Wizard. After downloading and installing the software, connect your phone to the computer using a data cable. Under normal circumstances, the flashing wizard will automatically detect the phone connection and install the required drivers (the phone only needs to stay on the startup screen, or press the power button and HOME button to enter the recovery flashing interface). If the driver installation is unsuccessful, you can try using the driver wizard or manually download the driver corresponding to your phone model. After completing the driver installation, you can start flashing your phone. First, download the ROM file suitable for your phone model, and then select the downloaded ROM to flash. The whole process is very simple.

Use card swiping, that is, manual swiping:

Charge the battery and make sure your phone can install a memory card. If the memory card is solidified (without inserting the memory card, you need the power button HOME button - enter the recovery flash interface and install the driver. If you choose USB or something, the following will appear on the computer: Mobile disk) Download the memory card and you need to flash the ROM (the ROM corresponding to the mobile phone model, otherwise it will still not boot). On the recovery interface, select Install from the memory card and select the good rom. Click and install will pop up. What is the final flash? If successful, it will automatically restart

The above is the detailed content of How to repair a bricked phone without a computer. For more information, please follow other related articles on the PHP Chinese website!