Black Apple reinstalls a clean mac (Black Apple reinstalls macos)

Introduction: This article is here to introduce you to the relevant content about reinstalling a clean mac with black apple. I hope it will be helpful to you, let’s take a look.

Remember the installation process of Black Apple

1. Path: EFI/EFI/Start installing the system partition to the system disk, preferably more than 30G. (If your computer is in MBR partition format, you need to find another USB flash drive, download Xiaobai’s one-click reinstallation system, make the USB flash drive a USB boot disk, set the BIOS to uefi boot, and set the disk partition to gpt format. .

2. The first thing you need is a driver object that supports the Apple system. Find the BOOT assistant. Use the new U disk to boot. This is for driver support. Find the disk management in the Windows system , carve out a partition for use by Apple systems, about 80G.

3. Select "Install macOS big sur" and follow the prompts to install. This process may take some time, depending on your computer Performance and hard disk speed. Post-installation configuration When big sur is installed, you need to perform some configurations.

4. The first step is to make a driver that supports Apple systems and find the BOOT comp assistant. As shown in the figure below The second step is to use the new U disk to boot and open the boot camp as shown in the figure below. The third step is to right-click the computer and select the management option as shown in the figure below.

Who can install a black Apple system? , ask for advice

1. The first thing you need is a driver object that supports the Apple system. Find the BOOT assistant. Use the new U disk to boot. This is for driver support. Find the disk in the Windows system Management, mark out a partition for use by the Apple system, about 80G.

2. Start the installation. After the above picture is completed, it will restart and enter the U disk boot again. We will find that there is one more option , which is the system after installation. After selecting to enter, it will restart again. 1 After the second restart, enter the following interface and then install.

3. Black Apple system installation tutorial: Want to turn an ordinary computer into Black Apple, a very critical step is to first check whether your computer hardware configuration supports the installation of Black Apple system.

4. The MacOS16 installation package is placed in the directory of the D drive. The purpose of placing it on the D drive is In order to easily find the installation package when installing the system, if you know the desktop path, you can put it on the desktop. Install ParagonHardDiskManage12, which has a secret key. Use the secret key to install. Just select the default for everything. Click Next for everything.

5. Step 9: Find the corresponding driver and some patches according to your hardware configuration. There are universal sound card drivers and time synchronization patches in the toolkit, which are suitable for most people. Others can be solved with the help of the driver wizard. Final hope The above method can help everyone successfully install the hacked Apple system.

6. First open the browser on the computer, select search and download the unlocker207 installation package, the vm cannot hack Apple because it lacks this plug-in.

Black Apple installation steps

1. Path: EFI/EFI/Start installing the system partition to the system disk, preferably more than 30G. (If your computer is in MBR partition format, you need to find another USB flash drive, download Xiaobai’s one-click reinstallation system, make the USB flash drive a USB boot disk, set the BIOS to uefi boot, and set the disk partition to gpt format. .

2. Right-click the 30G space you just adjusted and create a new partition. Create a MAC system disk with a 22G partition according to the figure below, and adjust the parameters in the figure. After completion, continue the steps just now and create a new installation file. Required partition. Install Black Apple. Install Black Apple computer illustration-2. Complete the above steps and click to save changes.

3. The first thing you need is a driver object that supports the Apple system. Find the BOOT assistant. Use the new one U disk boot. This is for driver support. Find the disk management in the Windows system and carve out a partition for use by the Apple system, about 80G.

4. The first step is to Make a driver that supports the Apple system and find the BOOT comp assistant. As shown in the figure below. The second step is to use the new U disk to boot and open the boot camp as shown in the figure below. The third step is to right-click the computer and select the management option, as shown in the figure below. As shown.

Seeking Black Apple installation tutorial

Path: EFI/EFI/Start installing the system partition to the system disk, preferably 30G or more. (If your computer is in MBR partition format, then You need to find another U disk, download Xiaobai's one-click reinstallation system, make the U disk as a U disk boot disk, set the BIOS to uefi boot, and set the disk partition to gpt format.

The first thing you need is A driver object that supports the Apple system, find the BOOT assistant. Use the new U disk to boot. This is for driver support. Find the disk management in the Windows system, and carve out a partition for use by the Apple system. It is about Around 80G.

Right-click the 30G space you just adjusted and create a new partition. Create a MAC system disk with a 22G partition according to the picture below, and adjust the parameters according to the picture. After completion, continue the steps just now and create a new installation file. The required partition. Install Black Apple. Install Black Apple Computer Diagram-2. Complete the above steps and click Save Changes.

The first step is to make a driver that supports Apple systems and find the BOOT comp assistant. As shown below. The second step is to use the new USB disk to boot and open the boot camp as shown in the figure below. Step 3: Right-click on the computer and select the management option, as shown in the figure below.

How to reinstall a black Apple system?

The first thing you need is a driver object that supports the Apple system and find the BOOT assistant. Boot from a new USB flash drive. This is for driver support. I found the disk management in the Windows system and carved out a partition for use by the Apple system, which is about 80G.

To download an Apple system file, the original system image is easy to find, including ISO and DMG. It is not recommended to use a black Apple system image with a modified kernel. Plug in the USB flash drive and use the system's built-in disk tool to format the USB flash drive. Select Mac OS extension as the format and name it as you wish.

There are two main types of installation under Mac; through software installation, currently the main ones are: Kext Wizard, Champlist, Kext Utility, etc., which are more convenient. The commonly used Kext Wizard also has a Chinese version.

Wait until the iTunes software recognizes the Apple phone. Click the iphone icon in the iTunes software. To back up data, first back up the data on your phone and click the "Backup Now" button. Now that you have entered the steps to reinstall the system and backed up your data, you have now entered the steps to reinstall the system.

Download the official firmware rom upgrade package, unzip it on your computer, and then copy the unzipped firmware package in zip format directly to the root directory of the phone's memory card.

Question, will reinstalling the win system in Black Apple affect Mac? Details

1.: Download Chinese cabbage on the computer, 2: Insert the U disk into the computer and open the Chinese cabbage software. . 3: Follow Lao Maotao’s prompts to create the USB flash drive. 4: Place the completed download system in the gho or iso folder of the USB flash drive. Pay attention to the format. If it is a gho system, put it in the gho folder. If it is iso, put it in the iso folder.

2. Method: Installing MAC OSX on an ordinary PC is called a black apple. Installing Black Apple will not have any impact on the current system, and you can also experience Apple's system for free. The disadvantage is that the installation process is cumbersome.

3. Copy HJMAC.iso to the C drive. You can create a HJMAC folder by yourself, and then add a HJMAC.iso startup item to the win7 startup menu as shown below. The purpose of adding this startup item is to install MAC.

4. According to this boss, the cause of the error is that after operating the partition under Win10, the partition type GUID of the MacOS startup disk is set to the wrong value. The main step of the solution is to change the partition type GUID of the MacOS disk to the correct value through the command line.

Conclusion: The above is all the content about black Apple reinstallation and clean mac compiled by this site. Thank you for taking the time to read the content of this site. I hope it will be helpful to you. Don’t forget to learn more related content. Find it on this site.

The above is the detailed content of Black Apple reinstalls a clean mac (Black Apple reinstalls macos). For more information, please follow other related articles on the PHP Chinese website!