


In a discussion about gaming mice some time ago, Xiao Lei mentioned that the first true "gaming mouse" was the Razer Boomslang released by Razer in 2003 - a DPI "up to" 2500, polling rate 125Hz USB gaming mouse. But in fact, the statement is not accurate, because this 2100/25 polling rate 00DPI Boomslang is actually an upgraded version of this series. Its previous generation, Boomslang released in 1999, is the real first game. mouse.
Compared with the second generation released 4 years later, the first generation Boomslang used a more primitive PS/2 interface, and the polling rate was only 10 -200Hz; it was not until the release of the Razer Copperhead using a laser sensor in 2005 that Razer's gaming mouse officially entered the era of 1000Hz polling rate. After that, Razer also completed its dominance of the high-end gaming mouse market with three mice: Viper, DeathAdder and BAsilisk.
According to Newzoo data, Razer achieved an 11% market share in the global gaming peripherals market last year, second only to Logitech’s 16%. In addition, Razer also has the highest user loyalty among gaming peripheral brands, and can be called the ROG in the field of gaming peripherals. After all, ROG has only been making peripherals in the past few years, and both Razer and ROG have a common theme in gaming peripherals - lighting. Because the lighting design of Razer products is too "eye-catching", there are endless complaints about Razer's status as a "light factory" on the Internet.
"When you buy a set of Razer keyboard and mouse"
Image source: Reddit forum user Bilbzzz
However, this emphasis on marketing and light on technology has also indirectly weakened Razer’s product competitiveness: According to Razer’s mid-term report last year: Razer’s R&D expenses were 200 million It has been around 554 million yuan for many years, but marketing expenses have continued to rise to 554 million yuan, a year-on-year increase of more than 40%. On the one hand, there is no increase in R&D investment, on the other hand, marketing expenses are rising year by year, and behind them are Logitech, SteelSeries and ROG that are catching up. In 2022, Razer is in urgent need of a new era "Boomslang" to stabilize itself. market, let everyone know that the gaming peripherals brand that “starts with players and empowers players” still puts players first.
And this arduous task falls on the Razer Death Adder V3 Pro released some time ago.
Inferno Viper V3 Hardware Upgrade
Although the name is Purgatory Viper V3 Pro (hereinafter referred to as V3 Pro ) is just a regular replacement for the Viper V2 Pro (hereinafter referred to as V2 Pro), but in terms of the core configuration of the V3 Pro, it is not difficult to find that the V3 Pro is not just a replacement for Razer.
Image source: Lei Technology
If V2 Pro is just Lei An "asymmetric high-end mouse" under the Venomous Viper series, the product positioning of V3 Pro can be said to have truly elevated the Purgatory Viper product line to the flagship position of Razer gaming mice, alongside Venomous Viper and Cyballis. The same flagship mouse lineup.
Picture source: Lei Technology
First of all, V3 Pro switched to Razer's latest Focus Pro 30K sensor, as its name suggests, this new generation sensor can support surface tracking up to 30,000DPI. In addition, Razer’s “signature” asymmetric suspension technology can provide the mouse with more accurate and continuous surface tracking.
Perhaps many people don’t understand the practical use behind this asymmetric abort technology, and they haven’t even heard of the name. To put it simply, after asymmetric suspension is turned on, even if the mouse leaves the surface of the mouse pad, the Focus Pro 30K sensor can still continue to accurately track the mouse displacement through several millimeters of "air".
Picture source: Lei Technology
And because the general mouse Tracking is interrupted after leaving the mouse pad, and once the sensor reacquires the mouse pad, the master controller will experience incorrect acceleration due to "jumping" in the sensor position before and after leaving the mouse pad, causing the cursor to briefly "flash".
In addition, V3 Pro also uses Razer’s third-generation optical micro-motion. Compared with traditional mechanical micro-motion, optical micro-motion is roughly similar in principle to optical axis keyboards. It uses internal lasers and light shields to replace the traditional metal reed structure of micro-motion. In addition to theoretically providing a faster trigger response speed, optical micro-movements not only have better stability but also have a longer lifespan than mechanical micro-movements due to the absence of mechanical reeds and contact structures.
The second-generation optical micro-movement used in V2 Pro has achieved a motor life of approximately 70 million times, while the third-generation optical micro-movement has directly increased this number to 90 million times. Based on 60 clicks per minute and continuous clicks 24 hours a day, the theoretical lifespan of V3 Pro can allow you to click continuously 24/7 for nearly 3 years.
Due to the use of new sensors, micro-motion and other "improvements", the battery life of V3 Pro has also been increased to 90 hours.
Changes in appearance between V3 Pro and V2 Pro
But for some unknown reason, V3 Pro actually canceled the receiver storage slot at the bottom of the mouse. Although V3 Pro supports HYPERSPEED one-to-two receiver technology, Razer is not even willing to open a hole on the bottom of V3 Pro to put the receiver, which is really hard for me to understand.
"Double high mouse" will be the short-term improvement direction
So equipped with various upgrades and "downgrades" V3 Pro, how does it perform in use? Here Xiaolei did a simple test on V3 Pro. The comparison mouse used in the test was the Razer Viper V2 Pro, and the test mouse pad was the Razer Flame Bug Hard Edition.
Image source: Ray Technology
In Focus Pro 30K sensor support me. Even without the help of the so-called "smooth assist", V3 Pro performs very well in four situations: high speed, low speed, acceleration, and deceleration. The lines are straight, the dots are even, and the subtle angle changes are retained. The performance of MouseTester is also excellent, smooth and without breakpoints from beginning to end.
The above is the detailed content of Razer Viper V3 Pro review: What's the trade-off between power and portability?. For more information, please follow other related articles on the PHP Chinese website!

在iPhone上,Apple 的屏幕录制功能会录制您在屏幕上所做的事情的视频,如果您想捕捉游戏玩法、引导他人完成应用程序中的教程、演示错误或其他任何事情,这非常有用。在显示屏顶部有凹口的旧款 iPhone 上,该凹口在屏幕录制中不可见,这是应该的。但在带有 Dynamic Island 切口的较新 iPhone 上,例如 iPhone 14 Pro 和 iPhone 14 Pro Max,Dynamic Island 动画显示红色录制指示器,这导致切口在捕获的视频中可见。这可能会

如何在 iPhone 上为主屏幕和锁定屏幕设置不同的壁纸以下是您可以为 iPhone 的 iOS 16 及更高版本的主屏幕和锁定屏幕选择不同壁纸的方法:打开“设置”应用转到“壁纸”找到当前的壁纸选择,然后点击主屏幕侧下的“自定义”选择您要使用的自定义壁纸;照片、渐变、颜色、模糊等点击“完成”将主屏幕壁纸设置为与锁定屏幕壁纸不同如果您想自定义锁屏壁纸或其他壁纸细节,请执行此操作,否则点击“完成”以完成并将更改设置为您的 iPhone 壁纸大多数用户可能希望以这种方式自定义他们当前的锁定屏幕和主屏幕

对于喜欢使用屏幕键而不是物理键盘的人来说,虚拟键盘是一个很好的选择。不仅因为它更容易,还因为它带有附加功能。此外,屏幕键盘可助您一臂之力,尤其是在物理键盘停止工作时。当屏幕键盘对您有很大帮助时,硬件故障是另一种情况。虚拟键盘允许您在鼠标的帮助下键入任何内容,同时它还允许您更改键盘语言,这与物理键盘不同。在这种情况下,您需要快速访问屏幕键盘,您可以通过为虚拟键盘创建桌面快捷方式来实现。在这篇文章中,我们将展示如何在 Windows 11 或 Windows 10 上轻松创建屏幕键盘的桌面快捷方式。

AirPods Pro具有出色的功能,例如降噪和采用入耳式设计的透明模式。为了在这些功能和其他功能之间切换,AirPods Pro(和 AirPods 3)杆中的力传感器可提供轻松控制。继续阅读以了解如何更改 AirPods 控件,包括按压速度、按压持续时间以及左右力传感器的功能等等。AirPods gen 1 和 2使用耳塞上的双击进行控制。但AirPods Pro 和 AirPods 3使用内置在每个耳塞杆中的压力传感器。我们将介绍三种在降噪、透明度和关闭之间切换的方法,如何自定义力度传感器

哪款 Apple Watch 支持心电图 (ECG) 测量?由于记录心电图需要您的 Apple Watch 配备电子心脏传感器,这意味着 ECG 应用程序仅适用于部分 Apple Watch 型号。这些包括:苹果手表系列 4苹果手表系列 5苹果手表系列 6苹果手表系列 7苹果手表系列 8Apple Watch Ultra如果您拥有 Apple Watch Series 3、Watch SE 或更旧的设备,您将无法记录您的心跳和节律来制作心电图。 在 Apple Watch 上使用心电图需要什么?

如何更改 iPhone 主屏幕和锁定屏幕上的壁纸为您的 iPhone 或 iPad 设置墙纸会将墙纸设置为与锁定屏幕和主屏幕相同的墙纸。但是,您也可以让您的锁定屏幕显示一张壁纸,而主屏幕显示不同的内容。为 iPhone 主屏幕和锁定屏幕设置不同的墙纸:从 iPad 或 iPhone 主屏幕打开“设置”应用程序。向下滑动并从选项列表中选择墙纸。找到您当前的墙纸,然后点击主屏幕 下的自定义选项。现在,从屏幕底部的选项栏中选择您要使用的自定义墙纸。请注意,您可以选择Color、Gradient以及可能

如何强制重启 iPhone 13 Pro、iPhone 13 Mini 和 iPhone 13以下是重启 iPhone 13 系列的方法:首先,按下并释放音量调高按钮接下来,按下并释放降低音量按钮最后长按电源键,电源键位于iPhone 13系列的右侧继续按住电源按钮,直到您看到屏幕上出现 Apple 标志看到 Apple 标志后,表示重启已启动,您可以松开按钮。iPhone 将重新启动,由于强制重启的性质,重新启动可能需要比平时稍长的时间。至此,您已成功强制重启 iPhone 13 Pro

Apple 的家庭战略已经无处不在,但他们似乎终于对 HomePod mini 产生了影响。关于苹果制造带显示屏的 HomePod 的谣言四起,但街上的消息是,正在测试的产品看起来很像安装在扬声器上的 iPad。他们不应制造与谷歌和亚马逊产品非常相似的科学怪人产品,而应采用他们为 HomePod mini 制定的蓝图,并将其用作独特的环境智能显示器的基础。有角度的圆形显示器HomePod mini 的顶部表面会亮起五颜六色的 Siri 动画,但它实际上无法显示任何类型的内容或控件。事实上,Hom


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

SublimeText3 Chinese version
Chinese version, very easy to use

mPDF
mPDF is a PHP library that can generate PDF files from UTF-8 encoded HTML. The original author, Ian Back, wrote mPDF to output PDF files "on the fly" from his website and handle different languages. It is slower than original scripts like HTML2FPDF and produces larger files when using Unicode fonts, but supports CSS styles etc. and has a lot of enhancements. Supports almost all languages, including RTL (Arabic and Hebrew) and CJK (Chinese, Japanese and Korean). Supports nested block-level elements (such as P, DIV),

SublimeText3 Linux new version
SublimeText3 Linux latest version

MantisBT
Mantis is an easy-to-deploy web-based defect tracking tool designed to aid in product defect tracking. It requires PHP, MySQL and a web server. Check out our demo and hosting services.

SAP NetWeaver Server Adapter for Eclipse
Integrate Eclipse with SAP NetWeaver application server.
