How to fix SYSTEM PTE MISUSE error in Windows 11

If your computer repeatedly reboots and displays a blue screen with the error SYSTEM PTE MISUSE, it means that the page table entries (PTEs) are being accessed incorrectly, which is a security issue due to damaged or outdated hardware. This is one of the most annoying errors encountered in Windows and can cause system crash. So, if you are facing this problem, don’t be nervous because here you will get some fruitful solutions to resolve the issue. What is the SYSTEM PTE MISUSE stop code? The SYSTEM PTE MISUSE error has a check value of 0x000000DA. This indicates that a page table entry (PTE) was improperly accessed. This type of blue screen error is caused due to hardware issues such as any incompatible device and corrupted system files in your PC. If any system driver for a particular hardware is corrupted, it will not recognize that external device and cause the system to crash with a Blue Screen of Death error. Why does the SYSTEM PTE MISUSE blue screen error occur? Two different security technologies, PTT and TPM. Misconfigured, old or corrupted system drivers. Damaged hard drive. Due to memory (RAM) corruption. Virus or malware infection. Driver conflict due to newly installed hardware. The Windows registry database is corrupted. So, these are the major factors behind the issue and hence some Vista users have also reported Windows Defender not running Vista error. Therefore, resolving the security bug and fixing the drivers and hardware will eradicate the entire problem. Fix SYSTEM PTE MISUSE blue screen error In this tutorial, you will find instructions on how to fix the "SYSTEM_PTE_MISUSE" blue screen error when installing Windows. continue reading! Disable The TPM Trusted Platform Module is the system firmware that provides security to the operating system. The system PTE misuse blue screen error occurs due to security reasons and disabling TPM can resolve the issue. Therefore, you need to perform this task in the BIOS. Shut down your computer completely. Now turn on your computer and on the screen you will be able to enter the BIOS by pressing the relevant keys. Different models have different buttons. When performing a task, the button will flash on the screen. Press this button to enter the setting area. General keys include Del, F1, F2, F10, etc. Once you are in the BIOS setup page you will find several tabs listed at the top of the page, use the arrow keys to select "Security". Now, move to “TPM Embedded Security” and switch the radio button to “Hidden” mode. Perform the above tasks, save the settings and exit the BIOS setup page. Now restart your computer. Disable PTT Security in BIOS If you encounter this error 0x000000DA error on your Dell computer, then you can go into BIOS and uncheck PTT Security and check if the error is resolved or not. During the boot process, press the F2 or F12 key to enter BIOS mode. Now go to Security Tab > PTT Security section and uncheck the "PTT On" box. Restart your computer and check for errors. Update Drivers Press the "Windows" and "X" keys simultaneously to open the shortcut menu and click "Device Manager." After this, the Device Manager page will appear on your screen, select "Display Adapters" and click on the arrow button located to the left of the display adapter. It will provide you with a list of drivers. Once you get the list, select the driver, right-click on it, and select "Update Driver." Windows will now look for updates and restart your computer once the process is complete. Rolling Back Drivers If you have updated any drivers recently, you may encounter this error. In this case, you can go back to the previous version of the driver by following these steps: Click the Start button and search for Device Manager and click on the result. Now expand the category containing the issue and right-click on it and select the "Properties" option. Click the Drivers tab and then click the Rollback Driver option. In the next window, if asked for confirmation, click Yes. After successfully rolling back the driver, the recent driver will be replaced by the old driver and checked for 0x000000DA error. Run System File Checker If you are looking for tools to repair corrupted files on Windows, then System File Checker is your best choice. The built-in tools of Windows operating system will scan and repair corrupted files and help you resolve the issue. The process is simple and the steps for the same are listed below. Click the Start menu and type CMD in the search bar. Once you get the search results, select Command Prompt, right-click on it and further click on “Run as administrator”.If any confirmation is asked, click the "Yes" button. After this, you will get the command box, type " sfc /scannow " and press "Enter" key. Now, wait for some time as Windows needs time to find and repair the corrupted files. Once the process is complete, you need to restart your computer. System Restore Points Sometimes, Windows Update or newly installed applications can conflict with the system and cause SYSTEM PTE MISUSE blue screen error. Therefore, to resolve this issue, you can use the System Restore Point feature of your Windows operating system, which will restore your PC to a functioning point. The method is very simple and for your comfort the steps are provided below. This method requires administrator authorization, so if you can log into your computer, go for that method. However, if you are unable to access your computer due to repeated shutdowns, perform Safe Mode operations and then apply the steps listed. Click the Start menu, type "Control Panel" in the search bar, and then press the Enter key. Soon, you will find the Control Panel page on your screen with the featured Computer Settings. Click on the "System and Security" section. After this, you will find the features of "Windows", click on "System". A pop-up will appear on the screen, move to the System Protection section and select System Restore. If you have prepared a restore point before, select one from the featured list in the next window and click the OK button. Now, follow the on-screen instructions to complete the process and make sure to restart your computer once completed. Run DISM Tool To fix this error code 0x000000DA, try running DISM (Deployment Image Servicing and Management). To do this, follow these steps: Open a command prompt in administrator mode, enter the following commands one by one and press Enter: Dism /Online /Cleanup-Image /CheckHealthDism /Online /Cleanup-Image /ScanHealthDism /Online/Cleanup-Image /RestoreHealth Once the process is complete, just restart your computer and check for errors. Run the troubleshooter Try running the troubleshooter to fix this error code 0x000000DA. To do this, follow these steps: Open settings and type "troubleshoot" and select the first option from the results. Click "See all" in the upper left corner. You will see a list of built-in troubleshooters available on your computer. Now click on Hardware and Devices and run the troubleshooter. Run your system in safe mode Try starting your system in safe mode. We have a detailed tutorial on how to boot your system in Safe Mode, otherwise you can follow these steps: Go to the Start menu and select Settings. Click Update & Security. Now search for recovery options. Now go to Advanced Startup options and click on Restart Now. Now your system will enter safe mode. Go to the troubleshooting options. Click Advanced options and Startup settings, then click Restart. Now press number key 4 to boot in safe mode. Use Windows Defender to scan your PC for viruses or malware that can affect system files, causing a SYSTEM_PTE_MISUSE blue screen error. Therefore, you can use Windows Defender tool to remove viruses. Some users have also reported that Windows Defender cannot run Vista and cannot detect viruses. So, in this case, they can access some trusted antivirus software to remove dangerous viruses from the PC. Click on the Start menu and then further click on the Settings button above the Power menu. Soon, a settings page will appear on the screen. Move to the "Update & Security" section. After this you will find a summary of Windows updates and on the left end of the page you will get some useful options, click on Windows Security. In the Windows Security page you will get a lot of options, select Virus & threat protection. After that, a pop-up window will appear on the screen, click on “Run new advanced scan”. Soon, a page will appear on your screen with Advanced Scan mode, select Full Scan and click on Scan Now button. That's it; now wait for some time and let Windows Defender fix the issue.

The above is the detailed content of How to fix SYSTEM PTE MISUSE error in Windows 11. For more information, please follow other related articles on the PHP Chinese website!