


Data loss is an inevitable problem for many users. Most people get into trouble when their valuable files are accidentally deleted, lost, or their hard drive is formatted. In order to save important data, users often turn to the Internet for help, looking for remedies on websites and forums. PHP editor Xigua has collected various solutions for data loss, which will be introduced in detail below to help you quickly recover lost data.
You may want to know how to use CMD command to recover deleted files. Maybe you will know the command prompt, such as "recover", "attrib", "chkdsk" command, etc., to help you recover deleted files. or missing files.
But these commands have usage requirements and are difficult to use correctly.
"How do I enter Recover command to recover deleted files? It needs to find the disk, path and file name. The name I entered is correct but I don't know the file Where is the storage path? "
This article will explain and introduce the usage of the "recover" command in CMD. With the guide here, you can recover deleted files using CMD command.
What is the Recover command in CMD?
The "recover" command is one of the commands in the command prompt. According to Microsoft, it is used to recover undamaged/uncorrupted data from problematic disks. It will scan the hard drive sector by sector and recover data from good sectors.
Syntax: recover[drive:][path]File name
The parameters used here respectively represent:
- Drive: the hard disk where the file is stored.
- Path: The exact directory of the file.
- Filename: The exact filename.
Can the Recover command recover deleted files?
Yes, the Recover command will try to recover readable information on the hard disk. By scanning sector by sector, it can recover complete data from defective hard drives but ignore corrupted/lost data in bad sectors. Here are its pros and cons.
Advantages: Recover data without causing damage or affecting the hard drive.
Disadvantages:
- Requires accurate file name and path.
- Only 1 file can be restored at a time.
- Wildcards are not supported in the syntax. (Wildcard is a special statement, mainly asterisk (*) and question mark (?), used to fuzzy search files.)
How to use the Recover command to recover deleted files?
Although this command is not too difficult, it requires more data recovery. Follow the steps here to recover files in CMD.
1. Enter "cmd" in the Windows search box to start the command prompt > Select "Run as administrator".
#2. Enter the following commands in sequence and press "Enter". diskpart > list disk > select disk 1 > list volume > select volume 4
. Replace the number here with the actual drive letter of the affected drive.
3. Enter recover [drive:][path]filename
.
For example: Recover E:\test\recover-command-usage.jpg
It can be retrieved from the E: drive named "recover-command -usage.jpg" photo.
So, is there an easy way to recover deleted or lost data?
How to directly recover deleted files without using commands?
Compared with the strict requirements of the "recover" command, many users prefer to directly recover lost data without using the command, thereby saving time and energy.
In this case, you can use professional Windows data recovery tools to help you. This article recommends AOMEI Recovery Star, which can help you recover a variety of data lost due to various data loss situations.
- Supports multiple storage media. SSD, HDD, USB, flash drive, SD card, etc.
- Recover many types of files. Recover more than 200 types of data such as documents, texts, pictures, videos, audios, emails, compressed files, etc.
- Compatible with multiple systems. Support NTFS, FAT32, exFAT, ReFS in Windows 11/10/8/7. (Compatible with 64-bit and 32-bit operating systems.)
1. Download, install and run AOMEI Recovery Star on your computer> Select the disk/partition where data was lost> Click " Start scanning".
#2. After automatically performing quick scan and deep scan, you will see deleted and lost files.
3. Check the scan results and select the data you need. Then click on "Recover x files" and save these recovered files in the new location.
FAQ: Commands for recovering files
This article details the syntax, usage, and advantages of using the Recover command in CMD to recover deleted files. shortcoming. Additionally, a good data recovery tool is also introduced.
In fact, backing up your important data is a practical way to prevent data loss. You can use the professional data backup tool AOMEI to easily back up and protect your data.
If you may still have many questions about the command. Additional information has been prepared here to assist you.
What is the attrib command? Can deleted files be recovered using attrib?
If you are looking to recover data from hard drive using command prompt, you may know about "attrib" command to recover files.
The "attrib" command is used to display, delete or assign file attributes. It needs to be used with parameters such as /r, /s, /d, etc.
Different parameters have different effects on files. Users need to use "+" or "-" in the parameters to assign or remove attributes.
Note:
- -h clears hidden file attributes.
- -r Clear the read-only file attribute.
- -s Clear system file attributes.
- /s Applies attrib and any command line options to matching files in the current directory and all its subdirectories
- /d Applies attributes and any command line options to a directory.
Among the multiple "attrib" commands, none can recover deleted files, just show some hidden files, cancel the "read-only" flag, etc.
Will CHKDSK delete my files?
The "chkdsk" command will check the file system and the data in it to see if there are any errors. It also needs to be used with parameters such as /f, /r, /x or /b to fix errors.
Generally speaking, it just checks the hard drive for physical or logical errors and does not disrupt or interfere with the files in the hard drive.
But sometimes, due to hard drive damage and other problems, your files may be lost, you can try to use AOMEI Recovery Star to find the lost files you need.
The above is the detailed content of Win10 uses the recover/attrib/chkdsk/ command to repair hard disk data loss and other problems. For more information, please follow other related articles on the PHP Chinese website!

scsi disk device不是固态硬盘。scsi disk device是采用SCSI接口的硬盘,是一种机械硬盘。SCSI硬盘的接口速度快,并且由于主要用于服务器,因此硬盘本身的性能也比较高,硬盘转速快,缓存容量大,CPU占用率低,扩展性远优于IDE硬盘,并且支持热插拔。

5400转的硬盘读写速度一般为100MB-150MB每秒;但实际情况可能会有所不同,影响硬盘速度的还有很多因素,比如AHCI模式比IDE模式快,传输单个文件比传输多个文件快,SATA3接口比SATA2接口等等。

hdd指的是机械硬盘,主要由盘片、磁头、盘片转轴及控制电机、磁头控制器等等机械装置组成的。机械硬盘在生产过程中全程位于无尘厂房,任何一粒微小的灰尘落到盘面在其一分钟上千转的工作状态下对整个磁盘都是毁灭性的打击。

监控硬盘可以当电脑硬盘用。监控硬盘的储存形式与电脑硬盘没有任何区别,只要电脑具备支持监控硬盘的数据接口和供电接口,就可以当作电脑硬盘使用。但如果是当作主硬盘使用,需要对硬盘进行分区,然后重新安装系统才可以;作为监控硬盘时,里面存储的都是视频数据,作为电脑主硬盘时,就需要重新安装系统。

是否看够了Windows7系统中的硬盘分区图标,那么今天我们就来尝试DIY一个自己喜欢的硬盘图标。以下是详细的操作步骤,希望对大家有所帮助。首先,您需要准备一个硬盘或您喜欢的图标文件,这里使用的是ico格式图标。1.打开您想要修改硬盘分区图标的盘,然后将ico文件放入根目录中,我在这里修改D盘。2.右键在D盘根目录中,创建一个名为autorun的空白文本,并将其扩展名txt修改为inf。3.打开文件,输入以下内容并保存:[autorun]icon=favicon.ico。4.正常重启电脑后,D盘

硬盘插到电脑上没反应的原因:1、USB插槽供电不足;2、移动硬盘内部的硬盘老化,需要更大的电量来驱动;3、电脑插槽坏了;4、USB插槽设备冲突或者驱动出现问题。

虽然现在硬盘更容易获得并且速度更快,但它们最终仍会消耗大量电力,特别是在笔记本电脑上。硬盘消耗更多的电量,最终会比应有的更快耗尽笔记本电脑的电池,因此,用户更喜欢在空闲时间后关闭硬盘。此功能是在Windows10的电源管理选项中引入的,有助于延长笔记本电脑的电池寿命。虽然它可能会在具有平衡电源计划或节电计划的系统中自动启用,但您也可以手动打开此功能。只要您的PC在所选时间段内处于空闲状态,这将关闭硬盘。反过来,这将自动使用更少的电量,从而节省笔记本电脑的电池寿命。但是,当您想重新使用PC时,

硬盘是外存。外存全称“外存储器”,是指除计算机内存及CPU缓存以外的储存器,一般断电后仍然能保存数据;外存通常是磁性介质或光盘,像硬盘,软盘,磁带,CD等,能长期保存信息,并且不依赖于电来保存信息,但是由机械部件带动,速度与CPU相比就显得慢的多。


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

DVWA
Damn Vulnerable Web App (DVWA) is a PHP/MySQL web application that is very vulnerable. Its main goals are to be an aid for security professionals to test their skills and tools in a legal environment, to help web developers better understand the process of securing web applications, and to help teachers/students teach/learn in a classroom environment Web application security. The goal of DVWA is to practice some of the most common web vulnerabilities through a simple and straightforward interface, with varying degrees of difficulty. Please note that this software

Atom editor mac version download
The most popular open source editor

Dreamweaver Mac version
Visual web development tools

PhpStorm Mac version
The latest (2018.2.1) professional PHP integrated development tool

SecLists
SecLists is the ultimate security tester's companion. It is a collection of various types of lists that are frequently used during security assessments, all in one place. SecLists helps make security testing more efficient and productive by conveniently providing all the lists a security tester might need. List types include usernames, passwords, URLs, fuzzing payloads, sensitive data patterns, web shells, and more. The tester can simply pull this repository onto a new test machine and he will have access to every type of list he needs.
