When assembling a computer, how do you generally choose a power supply?

When assembling a computer, the choice of power supply is crucial. Computers with different configurations have different power requirements. When choosing, you need to consider factors such as the computer's overall power consumption, expansion potential, and budget. PHP editor Youzi will take you to discuss in detail how to choose a suitable power supply to help you assemble a stable and reliable computer.

When assembling a computer, how do you generally choose a power supply?

The following aspects need to be considered when selecting a power supply:

1. Power: The power of the power supply must be sufficient to meet the needs of the entire computer system. It is generally recommended to choose a power slightly higher than the actual demand. Ensure the stable operation of the computer. Generally speaking, ordinary office computers require a power supply of 300W-500W, and gaming computers require a power supply of 500W-750W.

2. Brand and quality: Choosing a well-known brand and high-quality power supply can ensure the stability and life of the power supply and avoid failures or safety issues. Common brands include Corsair, Antec, Cooler Master, Zhenhua, etc.

3. Interfaces and cables: Choose appropriate interfaces and cables according to your own needs, such as SATA interface, PCI-E interface, etc. At the same time, the cable length should also take into account the chassis size and wiring conditions.

4. Efficiency: A high-efficiency power supply can improve energy utilization, reduce energy waste and heat generation, and also extend the life of the power supply. It is generally recommended to choose high-efficiency power supplies with 80PLUS certification and above.

5. Noise: Choosing a low-noise power supply can improve the stability and user experience of the entire system. It is generally recommended to choose a power supply with a larger fan diameter and lower rotation speed.

In short, when choosing a power supply, you need to consider comprehensively based on your own needs and budget, and choose a power supply with an appropriate brand, power, interface, efficiency, noise, etc. At the same time, attention should also be paid to the safety and stability of the power supply to avoid failures or safety issues.

How to choose a computer power supply?

1.

High-power computer power supply: If the power at home is particularly high, you can choose a large computer power supply, which can save electricity and is particularly smooth to use.

2.

You can choose a small power supply: This kind of power supply is basically not anywhere, and it is also very convenient to use and easy to carry, so it does not occupy any space.

3.

Square multi-purpose power supply: This multi-purpose power supply can be used with more sockets, making it very convenient to use. It is a popular style in recent years.

What kind of chassis should I choose for assembling a computer?

I like side-transparent chassis. I like to play games, so the requirement for the chassis is to have good heat dissipation. The computer host chassis I assembled recently is Patriot, Daybreak X chassis, with a vertically mounted graphics card. Yes, the side-transparent chassis has light effects after assembly and has good heat dissipation.

How to choose the power supply for assembling a computer?

1. Power, first look at the power of your power supply hardware, and look at the rated power of your graphics card and CPU.

The simplest algorithm is to add the graphics card and CPU, plus 200W. If the power is not enough, no matter how good the brand is, it will pale in comparison.

Excessive performance will feel like a waste.

2. Check the size of the chassis to see if it can fit. If it can’t fit, replace the power supply and chassis, which is a bit troublesome!

3. For wires, you can choose full modules, straight-out cables, or semi-modules. Full-module assembly is simpler.

4. Power supply efficiency and quality. Nowadays, power supplies have various solutions, such as DC-DC, EMI filters, capacitors, etc.

Solid capacitors in power supplies are better, and single-channel 12V current is better. A friend who doesn't install the computer often can't understand many parameters. Simply buy a good power supply with confidence. Look at the brand. Taiwanese and American Corsair products are not very cost-effective. In fact, they are a bit exaggerated. Domestic power supplies include Great Wall, Huntkey, Cooler, etc. to choose from.

My friends around me use Great Wall power supplies the most. Domestic power supplies from Great Wall are used in civilian, military, aerospace, supercomputers, servers, etc., which shows that they are of excellent quality. A 400W bronze power supply for home and office use is enough. Games, etc. require more than 500W, and both bronze and gold medals are acceptable. The efficiency and quality of gold medals will be better than bronze medals.

How to choose the power supply for assembling a computer?

The power supply for assembling the computer should choose a national standard brand product with a power that is at least 1/3 greater. If the power consumption of the host is 350 watts, then a nominal power supply of 450 watts or more should be used

How long is the lifespan of an assembled computer power supply?

If we talk about the life span after use, this is not necessarily true. It may break in one year, or it may not break in ten years. But if we talk about performance life, the longest is estimated to be 5 years. After 5 years, even the current mid-to-high-end configurations may even have web pages and QQ stuck by then

In fact, many computers are being operated The system was eliminated. The new operating system has high hardware requirements, and old computers are too slow to run the new operating system. Just be eliminated. This is the trend and law, and it is also the need of software and hardware manufacturers and dealers.

How to connect the power cord of the assembled computer?

When assembling the computer power cord, you need to connect the power cord to the power supply and the computer host. The following are general steps:

1. Disconnect the power supply: Make sure the power supply and computer host are powered off, and unplug the power plug.

2. Connect the power supply: Insert the plug of the power cord into the corresponding socket of the power supply. The socket on the power supply is usually located on the back of the power supply and has a specially shaped slot to ensure that the plug is connected correctly.

3. Connect to the host: Look for the power interface on the back of the computer host, usually located on the top or bottom of the host. Plug the other end of the power cord into the power socket of the computer host.

4. Fix the cables: Use cable ties or wire harnesses to fix the power cords around the host to ensure that the cables are neat and safe.

5. Check the connection: Make sure the power cord is tightly connected to the power supply and computer host socket without looseness.

6. Repower the computer: Insert the power plug into the power socket and turn on the power switch to power the computer.

When connecting the power cord, please make sure to choose a power supply that meets the hardware requirements of your computer, and ensure that the power cord is properly installed and assembled to ensure a secure and safe connection. If you encounter any problems during connection, it is recommended to refer to the manual of the power supply or computer host, or seek professional help. Also, be careful when assembling the power cord and make sure to follow relevant safety operating procedures to protect your own safety.

Assembling the computer power supply is not on?

It may be a power problem! It's very simple. Unplug everything plugged into the motherboard from the power supply first, then use a paper clip on the 20 4-pin end to connect the green wire to any black wire. If the power supply fan is spinning, then The power supply is good and can be ruled out.

After confirming that the power supply is good, connect the motherboard power supply and CPU power supply. If the independent graphics needs power supply, also connect it. However, if there is integrated graphics or nuclear graphics, it is recommended to unplug the independent graphics first (click When it lights up, it appears independently on top). Then unplug the hard drive indicator light, power indicator light, and restart button (leave only the power-on cable), and then turn on the computer. If it cannot be turned on, it means that the connection between the indicator lights, the reset button, and the power-on button is wrong. !

After assembling the computer, there is no response when pressing the power button?

First of all, we need to confirm what kind of unresponsiveness this is.

1. The power fan does not spin when the computer is turned on.

Solution

Check the power cord Is there any problem? Have you connected the power strip? Is it firmly plugged in?

Check whether the cpu motherboard power supply interface is plugged in correctly! Even though it's facing the wrong way, it won't turn on even though it's plugged in.

Check whether the power supply is normal. Use a wire to plug in the green and black wires of the motherboard's power supply cable. After plugging in, the fan rotates to prove it's normal.

2. The power fan is spinning when the power is turned on, but the screen does not display.

Troubleshooting: When the computer is turned on normally, the screen does not display. Press the key on the 7 keypad a few more times. If the light on the keypad turns off and on, it means the computer is running normally. It's just that the screen doesn't display. Now check to see if the display output line is connected to the graphics card normally! Graphics card graphics card! superior!

The keypad light on the top does not go out when pressed. It is usually because the memory module is not inserted firmly. If it is re-inserted repeatedly, if it still does not work, there is something wrong with the motherboard or CPU.

Assemble the computer. After the assembly is completed, the power button does not respond?

Solution:

1. Plug in the power cord tightly, check the plug on the plug board, and confirm that the plug board is powered on.

2. Confirm that the wire from the host power supply to the plug-in board is good, then take the power supply and connect it to the 24P plug of the motherboard. Short-circuit the green and any black wires. If the power fan turns on, it means there is no problem with the power supply and the power fan does not. It means the power supply is broken, replace it with a new one.

3. After confirming that there is no problem in the above 2 steps, unplug the switch wire connecting the motherboard and the front panel of the chassis, and use a screwdriver to short-circuit the two pins of the switch. If the fan rotates, it means there is no problem with the motherboard. If the fan If it doesn't turn on, it's probably a motherboard problem, so contact professional maintenance personnel to handle it.

4. Short-circuit the motherboard pins and the fan will rotate, but there is no response when pressing the switch button on the front panel. This means that the switch button is broken or stuck. Replace with a new switch button, or remove the stuck button.

The above is the detailed content of When assembling a computer, how do you generally choose a power supply?. For more information, please follow other related articles on the PHP Chinese website!