通过http连接MySQL

Navicat 可以使用 ntunnel_mysql.php 当作代理来连接 MySQL服务器.
http://www.navicat.com/manual/online_manual/en/navicat/rv_manual/HTTPS...
有没有开源的替代方案, 可以让mysql命令行通过http来连接MySQL服务器

---

注:
1. 感谢各位的回答, 题主需要的是使用PHP来做代理转发MySQL请求.
2. 题目的情况是这样的,
Web Server(只能通过HTTP协议连接外部网络)----外部Web Server(通过PHP转发MySQL)----外部MySQL server

回复内容：

Navicat 可以使用 ntunnel_mysql.php 当作代理来连接 MySQL服务器.
http://www.navicat.com/manual/online_manual/en/navicat/rv_manual/HTTPS...
有没有开源的替代方案, 可以让mysql命令行通过http来连接MySQL服务器

---

注:
1. 感谢各位的回答, 题主需要的是使用PHP来做代理转发MySQL请求.
2. 题目的情况是这样的,
Web Server(只能通过HTTP协议连接外部网络)----外部Web Server(通过PHP转发MySQL)----外部MySQL server

我觉得个人使用没有必要用http协议来做隧道，Navicat这个方案主要是考虑到它方便部署。如果你只是想穿透内网的话，其实你可以用qtunnel这类隧道搭建，还可以加密传输更加安全。而且实际上是把服务器上的mysql映射到了本地，你可以用任何mysql客户端去连接这个端口

http 本身用的是http的协议, mysql 连接mysql server 用的时mysql的协议, 两个协议怎么能直接互换呢, 就像你说的, 只能使用代理实现, 而不能直接使用http协议去连接mysql. 假如真的这样了, 通过http就能连接数据库, 那所有人只要拿到了接口, 就能操作数据库, 得多可怕

先谢邀。

我帮你贴出来了。

捡你看得懂的看。

<code>shell</code><code>[root /]# mysql --help
mysql  Ver 14.14 Distrib 5.1.73, for redhat-linux-gnu (i386) using readline 5.1
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Usage: mysql [OPTIONS] [database]
  -?, --help          Display this help and exit.
  -I, --help          Synonym for -?
  --auto-rehash       Enable automatic rehashing. One doesn't need to use
                      'rehash' to get table and field completion, but startup
                      and reconnecting may take a longer time. Disable with
                      --disable-auto-rehash.
  -A, --no-auto-rehash 
                      No automatic rehashing. One has to use 'rehash' to get
                      table and field completion. This gives a quicker start of
                      mysql and disables rehashing on reconnect.
  -B, --batch         Don't use history file. Disable interactive behavior.
                      (Enables --silent.)
  --character-sets-dir=name 
                      Directory for character set files.
  --column-type-info  Display column type information.
  -c, --comments      Preserve comments. Send comments to the server. The
                      default is --skip-comments (discard comments), enable
                      with --comments.
  -C, --compress      Use compression in server/client protocol.
  -#, --debug[=#]     This is a non-debug version. Catch this and exit.
  --debug-check       Check memory and open file usage at exit.
  -T, --debug-info    Print some debug info at exit.
  -D, --database=name Database to use.
  --default-character-set=name 
                      Set the default character set.
  --delimiter=name    Delimiter to be used.
  -e, --execute=name  Execute command and quit. (Disables --force and history
                      file.)
  -E, --vertical      Print the output of a query (rows) vertically.
  -f, --force         Continue even if we get an SQL error.
  -G, --named-commands 
                      Enable named commands. Named commands mean this program's
                      internal commands; see mysql> help . When enabled, the
                      named commands can be used from any line of the query,
                      otherwise only from the first line, before an enter.
                      Disable with --disable-named-commands. This option is
                      disabled by default.
  -g, --no-named-commands 
                      Named commands are disabled. Use \* form only, or use
                      named commands only in the beginning of a line ending
                      with a semicolon (;). Since version 10.9, the client now
                      starts with this option ENABLED by default. Disable with
                      '-G'. Long format commands still work from the first
                      line. WARNING: option deprecated; use
                      --disable-named-commands instead.
  -i, --ignore-spaces Ignore space after function names.
  --local-infile      Enable/disable LOAD DATA LOCAL INFILE.
  -b, --no-beep       Turn off beep on error.
  -h, --host=name     Connect to host.
  -H, --html          Produce HTML output.
  -X, --xml           Produce XML output.
  --line-numbers      Write line numbers for errors.
  -L, --skip-line-numbers 
                      Don't write line number for errors.
  -n, --unbuffered    Flush buffer after each query.
  --column-names      Write column names in results.
  -N, --skip-column-names 
                      Don't write column names in results.
  -O, --set-variable=name 
                      Change the value of a variable. Please note that this
                      option is deprecated; you can set variables directly with
                      --variable-name=value.
  --sigint-ignore     Ignore SIGINT (CTRL-C).
  -o, --one-database  Ignore statements except those that occur while the
                      default database is the one named at the command line.
  --pager[=name]      Pager to use to display results. If you don't supply an
                      option, the default pager is taken from your ENV variable
                      PAGER. Valid pagers are less, more, cat [> filename],
                      etc. See interactive help (\h) also. This option does not
                      work in batch mode. Disable with --disable-pager. This
                      option is disabled by default.
  --no-pager          Disable pager and print to stdout. See interactive help
                      (\h) also. WARNING: option deprecated; use
                      --disable-pager instead.
  -p, --password[=name] 
                      Password to use when connecting to server. If password is
                      not given it's asked from the tty.
  -P, --port=#        Port number to use for connection or 0 for default to, in
                      order of preference, my.cnf, $MYSQL_TCP_PORT,
                      /etc/services, built-in default (3306).
  --prompt=name       Set the mysql prompt to this value.
  --protocol=name     The protocol to use for connection (tcp, socket, pipe,
                      memory).
  -q, --quick         Don't cache result, print it row by row. This may slow
                      down the server if the output is suspended. Doesn't use
                      history file.
  -r, --raw           Write fields without conversion. Used with --batch.
  --reconnect         Reconnect if the connection is lost. Disable with
                      --disable-reconnect. This option is enabled by default.
  -s, --silent        Be more silent. Print results with a tab as separator,
                      each row on new line.
  -S, --socket=name   The socket file to use for connection.
  --ssl               Enable SSL for connection (automatically enabled with
                      other flags).Disable with --skip-ssl.
  --ssl-ca=name       CA file in PEM format (check OpenSSL docs, implies
                      --ssl).
  --ssl-capath=name   CA directory (check OpenSSL docs, implies --ssl).
  --ssl-cert=name     X509 cert in PEM format (implies --ssl).
  --ssl-cipher=name   SSL cipher to use (implies --ssl).
  --ssl-key=name      X509 key in PEM format (implies --ssl).
  --ssl-verify-server-cert 
                      Verify server's "Common Name" in its cert against
                      hostname used when connecting. This option is disabled by
                      default.
  -t, --table         Output in table format.
  --tee=name          Append everything into outfile. See interactive help (\h)
                      also. Does not work in batch mode. Disable with
                      --disable-tee. This option is disabled by default.
  --no-tee            Disable outfile. See interactive help (\h) also. WARNING:
                      Option deprecated; use --disable-tee instead.
  -u, --user=name     User for login if not current user.
  -U, --safe-updates  Only allow UPDATE and DELETE that uses keys.
  -U, --i-am-a-dummy  Synonym for option --safe-updates, -U.
  -v, --verbose       Write more. (-v -v -v gives the table output format).
  -V, --version       Output version information and exit.
  -w, --wait          Wait and retry if connection is down.
  --connect_timeout=# Number of seconds before connection timeout.
  --max_allowed_packet=# 
                      The maximum packet length to send to or receive from
                      server.
  --net_buffer_length=# 
                      The buffer size for TCP/IP and socket communication.
  --select_limit=#    Automatic limit for SELECT when using --safe-updates.
  --max_join_size=#   Automatic limit for rows in a join when using
                      --safe-updates.
  --secure-auth       Refuse client connecting to server if it uses old
                      (pre-4.1.1) protocol.
  --server-arg=name   Send embedded server this as a parameter.
  --show-warnings     Show warnings after every statement.

Default options are read from the following files in the given order:
/etc/mysql/my.cnf /etc/my.cnf ~/.my.cnf 
The following groups are read: mysql client
The following options may be given as the first argument:
--print-defaults        Print the program argument list and exit.
--no-defaults           Don't read default options from any option file.
--defaults-file=#       Only read default options from the given file #.
--defaults-extra-file=# Read this file after the global files are read.

Variables (--variable-name=value)
and boolean options {FALSE|TRUE}  Value (after reading options)
--------------------------------- -----------------------------
auto-rehash                       TRUE
character-sets-dir                (No default value)
column-type-info                  FALSE
comments                          FALSE
compress                          FALSE
debug-check                       FALSE
debug-info                        FALSE
database                          (No default value)
default-character-set             latin1
delimiter                         ;
vertical                          FALSE
force                             FALSE
named-commands                    FALSE
ignore-spaces                     FALSE
local-infile                      FALSE
no-beep                           FALSE
host                              (No default value)
html                              FALSE
xml                               FALSE
line-numbers                      TRUE
unbuffered                        FALSE
column-names                      TRUE
sigint-ignore                     FALSE
port                              0
prompt                            mysql> 
quick                             FALSE
raw                               FALSE
reconnect                         TRUE
socket                            (No default value)
ssl                               FALSE
ssl-ca                            (No default value)
ssl-capath                        (No default value)
ssl-cert                          (No default value)
ssl-cipher                        (No default value)
ssl-key                           (No default value)
ssl-verify-server-cert            FALSE
table                             FALSE
user                              (No default value)
safe-updates                      FALSE
i-am-a-dummy                      FALSE
connect_timeout                   0
max_allowed_packet                16777216
net_buffer_length                 16384
select_limit                      1000
max_join_size                     1000000
secure-auth                       FALSE
show-warnings                     FALSE
</code>