Penjelasan terperinci tentang kes pengiraan penggunaan CPU tertentu dalam Linux

Kira penggunaan CPU khusus dalam Linux Rujukan pengembangan penyelesaian yang diperlukan

Permintaan

Di Linux, anda boleh menggunakan arahan atas untuk menyemak CPU yang diduduki oleh proses tertentu, atau anda boleh menyemak penggunaan CPU tertentu (mula-mula gunakan arahan atas, dan kemudian tekan kekunci nombor "1" untuk memaparkan penggunaan setiap CPU), seperti Gambar berikut:

Dan keperluan kami ialah: Bagaimana untuk mendapatkan kadar penghunian CPU?

Penyelesaian

1. Pengetahuan latar belakang

Anda boleh menyemak penggunaan setiap CPU dalam /proc/stat, seperti yang ditunjukkan di bawah:

Maksud sepuluh nombor selepas cpu (0/1/2/…) adalah seperti berikut:

/proc/stat
kernel/system statistics.  Varies with architecture.  
Common entries include:

     user nice system idle iowait  irq  softirq steal guest guest_nice
cpu  4705 356  584    3699   23    23     0       0     0        0
cpu0 1393280 32966 572056 13343292 6130 0 17875 0 23933 0
   The amount of time, measured in units of USER_HZ
   (1/100ths of a second on most architectures, use
   sysconf(_SC_CLK_TCK) to obtain the right value), that
   the system ("cpu" line) or the specific CPU ("cpuN"
   line) spent in various states:

   user   (1) Time spent in user mode.

   nice   (2) Time spent in user mode with low priority
          (nice).

   system (3) Time spent in system mode.

   idle   (4) Time spent in the idle task.  This value
          should be USER_HZ times the second entry in the
          /proc/uptime pseudo-file.

   iowait (since Linux 2.5.41)
          (5) Time waiting for I/O to complete.  This
          value is not reliable, for the following rea‐
          sons:

          1. The CPU will not wait for I/O to complete;
             iowait is the time that a task is waiting for
             I/O to complete.  When a CPU goes into idle
             state for outstanding task I/O, another task
             will be scheduled on this CPU.

          2. On a multi-core CPU, the task waiting for I/O
             to complete is not running on any CPU, so the
             iowait of each CPU is difficult to calculate.

          3. The value in this field may decrease in cer‐
             tain conditions.

   irq (since Linux 2.6.0-test4)
          (6) Time servicing interrupts.

   softirq (since Linux 2.6.0-test4)
          (7) Time servicing softirqs.

   steal (since Linux 2.6.11)
          (8) Stolen time, which is the time spent in
          other operating systems when running in a virtu‐
          alized environment

   guest (since Linux 2.6.24)
          (9) Time spent running a virtual CPU for guest
          operating systems under the control of the Linux
          kernel.

   guest_nice (since Linux 2.6.33)
          (10) Time spent running a niced guest (virtual
          CPU for guest operating systems under the con‐
          trol of the Linux kernel).

2. Kira penggunaan CPU tertentu

Dengan pengetahuan latar belakang di atas, kami kemudian boleh mengira penggunaan CPU tertentu. Kaedah pengiraan khusus adalah seperti berikut:

Total CPU time since boot = user+nice+system+idle+iowait+irq+softirq+steal
Total CPU Idle time since boot = idle + iowait
Total CPU usage time since boot = Total CPU time since boot - Total CPU Idle time since boot
Total CPU percentage = Total CPU usage time since boot/Total CPU time since boot * 100%

Dengan formula pengiraan di atas, tidak sukar untuk mengira penggunaan CPU tertentu atau jumlah penggunaan CPU sistem.
Contoh: Kira keseluruhan penggunaan CPU sistem
Mula-mula, dapatkan keseluruhan pengguna, nice, system, idle, iowait, irq, softirq, steal, guest, guest_nice values ​​​​sistem pada t1 daripada /proc/stat, dan dapatkan Jumlah masa CPU sejak boot pada ini masa (dirakam sebagai jumlah1) dan Jumlah masa melahu CPU sejak but (dirakam sebagai melahu1).
Kedua, dapatkan jumlah Jumlah masa CPU sejak but (dirakam sebagai jumlah2) dan Jumlah masa melahu CPU sejak but (dirakam sebagai melahu2) sistem pada t2 daripada /proc/stat. (Caranya sama seperti step sebelum ini)
Akhir sekali, kira jumlah penggunaan CPU sistem antara t2 dan t1. Iaitu:
Peratusan CPU antara t1 dan t2 = ((total2-total1)-(idle2-idle1))/(total2-total1)*100%
Antaranya, ((total2-total1)-(idle2-idle1)) sebenarnya adalah masa CPU sistem diduduki antara t1 dan t2 (jumlah masa - masa melahu).
Berikut ialah skrip yang mengira penggunaan CPU dalam satu tempoh masa:

#!/bin/bash
# by Paul Colby (http://colby.id.au), no rights reserved ;)

PREV_TOTAL=0
PREV_IDLE=0

while true; do
  # Get the total CPU statistics, discarding the 'cpu ' prefix.
  CPU=(`sed -n 's/^cpu\s//p' /proc/stat`)
  IDLE=${CPU[3]} # Just the idle CPU time.

  # Calculate the total CPU time.
  TOTAL=0
  for VALUE in "${CPU[@]}"; do
    let "TOTAL=$TOTAL+$VALUE"
  done

  # Calculate the CPU usage since we last checked.
  let "DIFF_IDLE=$IDLE-$PREV_IDLE"
  let "DIFF_TOTAL=$TOTAL-$PREV_TOTAL"
  let "DIFF_USAGE=(1000*($DIFF_TOTAL-$DIFF_IDLE)/$DIFF_TOTAL+5)/10"
  echo -en "\rCPU: $DIFF_USAGE%  \b\b"

  # Remember the total and idle CPU times for the next check.
  PREV_TOTAL="$TOTAL"
  PREV_IDLE="$IDLE"

  # Wait before checking again.
  sleep 1
done

Kembangkan

Dalam kernel, fungsi pelaksanaan untuk fail dalam /proc/stat adalah seperti berikut:

附注：内核版本3.14.69，文件为 /fs/proc/stat.c

#include <linux/cpumask.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/proc_fs.h>
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/irqnr.h>
#include <asm/cputime.h>
#include <linux/tick.h>

#ifndef arch_irq_stat_cpu
#define arch_irq_stat_cpu(cpu) 0
#endif
#ifndef arch_irq_stat
#define arch_irq_stat() 0
#endif

#ifdef arch_idle_time

static cputime64_t get_idle_time(int cpu)
{
	cputime64_t idle;

	idle = kcpustat_cpu(cpu).cpustat[CPUTIME_IDLE];
	if (cpu_online(cpu) && !nr_iowait_cpu(cpu))
		idle += arch_idle_time(cpu);
	return idle;
}

static cputime64_t get_iowait_time(int cpu)
{
	cputime64_t iowait;

	iowait = kcpustat_cpu(cpu).cpustat[CPUTIME_IOWAIT];
	if (cpu_online(cpu) && nr_iowait_cpu(cpu))
		iowait += arch_idle_time(cpu);
	return iowait;
}

#else

static u64 get_idle_time(int cpu)
{
	u64 idle, idle_time = -1ULL;

	if (cpu_online(cpu))
		idle_time = get_cpu_idle_time_us(cpu, NULL);

	if (idle_time == -1ULL)
		/* !NO_HZ or cpu offline so we can rely on cpustat.idle */
		idle = kcpustat_cpu(cpu).cpustat[CPUTIME_IDLE];
	else
		idle = usecs_to_cputime64(idle_time);

	return idle;
}

static u64 get_iowait_time(int cpu)
{
	u64 iowait, iowait_time = -1ULL;

	if (cpu_online(cpu))
		iowait_time = get_cpu_iowait_time_us(cpu, NULL);

	if (iowait_time == -1ULL)
		/* !NO_HZ or cpu offline so we can rely on cpustat.iowait */
		iowait = kcpustat_cpu(cpu).cpustat[CPUTIME_IOWAIT];
	else
		iowait = usecs_to_cputime64(iowait_time);

	return iowait;
}

#endif

static int show_stat(struct seq_file *p, void *v)
{
	int i, j;
	unsigned long jif;
	u64 user, nice, system, idle, iowait, irq, softirq, steal;
	u64 guest, guest_nice;
	u64 sum = 0;
	u64 sum_softirq = 0;
	unsigned int per_softirq_sums[NR_SOFTIRQS] = {0};
	struct timespec boottime;

	user = nice = system = idle = iowait =
		irq = softirq = steal = 0;
	guest = guest_nice = 0;
	getboottime(&boottime);
	jif = boottime.tv_sec;

	for_each_possible_cpu(i) {
		user += kcpustat_cpu(i).cpustat[CPUTIME_USER];
		nice += kcpustat_cpu(i).cpustat[CPUTIME_NICE];
		system += kcpustat_cpu(i).cpustat[CPUTIME_SYSTEM];
		idle += get_idle_time(i);
		iowait += get_iowait_time(i);
		irq += kcpustat_cpu(i).cpustat[CPUTIME_IRQ];
		softirq += kcpustat_cpu(i).cpustat[CPUTIME_SOFTIRQ];
		steal += kcpustat_cpu(i).cpustat[CPUTIME_STEAL];
		guest += kcpustat_cpu(i).cpustat[CPUTIME_GUEST];
		guest_nice += kcpustat_cpu(i).cpustat[CPUTIME_GUEST_NICE];
		sum += kstat_cpu_irqs_sum(i);
		sum += arch_irq_stat_cpu(i);

		for (j = 0; j < NR_SOFTIRQS; j++) {
			unsigned int softirq_stat = kstat_softirqs_cpu(j, i);

			per_softirq_sums[j] += softirq_stat;
			sum_softirq += softirq_stat;
		}
	}
	sum += arch_irq_stat();

	seq_puts(p, "cpu ");
	seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(user));
	seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(nice));
	seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(system));
	seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(idle));
	seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(iowait));
	seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(irq));
	seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(softirq));
	seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(steal));
	seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(guest));
	seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(guest_nice));
	seq_putc(p, '\n');

	for_each_online_cpu(i) {
		/* Copy values here to work around gcc-2.95.3, gcc-2.96 */
		user = kcpustat_cpu(i).cpustat[CPUTIME_USER];
		nice = kcpustat_cpu(i).cpustat[CPUTIME_NICE];
		system = kcpustat_cpu(i).cpustat[CPUTIME_SYSTEM];
		idle = get_idle_time(i);
		iowait = get_iowait_time(i);
		irq = kcpustat_cpu(i).cpustat[CPUTIME_IRQ];
		softirq = kcpustat_cpu(i).cpustat[CPUTIME_SOFTIRQ];
		steal = kcpustat_cpu(i).cpustat[CPUTIME_STEAL];
		guest = kcpustat_cpu(i).cpustat[CPUTIME_GUEST];
		guest_nice = kcpustat_cpu(i).cpustat[CPUTIME_GUEST_NICE];
		seq_printf(p, "cpu%d", i);
		seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(user));
		seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(nice));
		seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(system));
		seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(idle));
		seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(iowait));
		seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(irq));
		seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(softirq));
		seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(steal));
		seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(guest));
		seq_put_decimal_ull(p, ' ', cputime64_to_clock_t(guest_nice));
		seq_putc(p, '\n');
	}
	seq_printf(p, "intr %llu", (unsigned long long)sum);

	/* sum again ? it could be updated? */
	for_each_irq_nr(j)
		seq_put_decimal_ull(p, ' ', kstat_irqs_usr(j));

	seq_printf(p,
		"\nctxt %llu\n"
		"btime %lu\n"
		"processes %lu\n"
		"procs_running %lu\n"
		"procs_blocked %lu\n",
		nr_context_switches(),
		(unsigned long)jif,
		total_forks,
		nr_running(),
		nr_iowait());

	seq_printf(p, "softirq %llu", (unsigned long long)sum_softirq);

	for (i = 0; i < NR_SOFTIRQS; i++)
		seq_put_decimal_ull(p, ' ', per_softirq_sums[i]);
	seq_putc(p, '\n');

	return 0;
}

static int stat_open(struct inode *inode, struct file *file)
{
	size_t size = 1024 + 128 * num_possible_cpus();
	char *buf;
	struct seq_file *m;
	int res;

	/* minimum size to display an interrupt count : 2 bytes */
	size += 2 * nr_irqs;

	/* don't ask for more than the kmalloc() max size */
	if (size > KMALLOC_MAX_SIZE)
		size = KMALLOC_MAX_SIZE;
	buf = kmalloc(size, GFP_KERNEL);
	if (!buf)
		return -ENOMEM;

	res = single_open(file, show_stat, NULL);
	if (!res) {
		m = file->private_data;
		m->buf = buf;
		m->size = ksize(buf);
	} else
		kfree(buf);
	return res;
}

static const struct file_operations proc_stat_operations = {
	.open		= stat_open,
	.read		= seq_read,
	.llseek		= seq_lseek,
	.release	= single_release,
};

static int __init proc_stat_init(void)
{
	proc_create("stat", 0, NULL, &proc_stat_operations);
	return 0;
}
fs_initcall(proc_stat_init);

Rujukan

http://man7.org/linux/man-pages/man5/proc.5.html

https://www.php.cn/link/f45cc474bff52cb1b2268a2f94a2abcf

https://www.php.cn/link/73d02e4344f71a0b0d51a925246990e7

Atas ialah kandungan terperinci Penjelasan terperinci tentang kes pengiraan penggunaan CPU tertentu dalam Linux. Untuk maklumat lanjut, sila ikut artikel berkaitan lain di laman web China PHP!