Home >Topic List >How to solve the problem of black screen after turning on the computer and unable to enter the desktop
How to solve the problem of black screen after turning on the computer and unable to enter the desktop
Solutions for black screen and unable to enter the desktop after the computer is turned on: 1. Check the monitor and connection cables; 2. Restart the computer; 3. Enter safe mode; 4. Check the graphics card driver; 5. Check for software conflicts; 6. Check for hardware problems; 7 , perform system repairs, etc. This topic provides you with relevant articles, downloads, and course content for you to download and experience for free.
How to solve the problem of black screen after turning on the computer and unable to enter the desktopSolution to a black screen that cannot enter the desktop after the computer is turned on: 1. Check the monitor and connection cables; 2. Restart the computer; 3. Enter safe mode; 4. Check the graphics card driver; 5. Check for software conflicts; 6. Check for hardware problems; 7. Perform system repair; 8. Check BIOS settings; 9. Update drivers; 10. Check hard disk health; 11. Check power supply; 12. Reinstall the operating system.
What to do if the screen goes black after the computer is turned onSolutions to a black screen after turning on the computer: 1. Check the monitor and connection cables; 2. Check the graphics card and memory stick; 3. Check the power supply; 4. Check the CPU and radiator; 5. Check the motherboard; 6. Check whether the computer components are properly inserted. Reliable; 7. Disable or upgrade the graphics card driver; 8. Check for software conflicts; 9. Check system files; 10. Check hard disk health; 11. Check power supply; 12. Reinstall the operating system.
How to solve the black screen after turning on the computerSolutions to a black screen after the computer is turned on: 1. Check the hardware connection; 2. Check the power supply; 3. Check the monitor; 4. Check the graphics card driver; 5. Check the system files; 6. Check the hard disk health; 7. Check the memory module; 8 , Check the motherboard. Detailed introduction: 1. Check the hardware connections to ensure that the monitor, graphics card, memory module and other hardware are connected correctly; 2. Check the power supply to ensure that the computer power supply is working properly. If the power supply fails, the computer may not start normally; 3. Check the monitor , check whether the monitor is working properly, etc.
What to do if there is no signal when the computer is turned onSolution to the problem of no signal when the computer is turned on: 1. Check whether the display signal cable and host interface of the computer host are loose and can be re-plugged; 2. Check whether the interface and monitor signal cable are damaged, and you can replace it with a new monitor signal cable; 3. Check whether the display interface of the computer motherboard at the rear of the host is intact. You can remove rust and correct the interface pins. 4. Open the side cover of the host and check whether the interfaces of the motherboard are intact. 5. Check the memory and memory slots next to the CPU on the computer motherboard. Is it firm? If it is loose, just unplug it and plug it in again.
How to solve the problem of slow computer startupMany friends’ computers have become more and more laggy because they have been used for a long time. It used to take more than ten seconds to turn on the computer, but now it takes a minute. So how to solve the problem of slow startup? The following editor will teach you how to start the computer very slowly. How to deal with it. 1. After turning on the computer, right-click "Computer", see the "Properties" button, and click Properties. 2. In the computer properties, find "System Protection" in the upper left corner and click System Protection with the left mouse button. 3. Enter the system properties, see the word "Advanced" above in "System Properties", click "Advanced", see the word "Performance" below, click "Settings" under Performance. 4. In "Performance Options", click "Advanced" again, as marked in the red box. 5. "Advanced" page
Related Resource DownloadsMore>
Related TutorialsMore>
- 06-29
- 06-29
- 03-09
- 12-21
- 06-13