mysql存储过程
下面是存储过程主体,问题是无论怎么跑,貌似里面的两个循环都只会执行一次。好困惑。请sql大神解救
BEGIN
DECLARE stop_flag INT DEFAULT 0;
DECLARE captain VARCHAR(500);
DECLARE captain1 VARCHAR(500);
DECLARE captain2 VARCHAR(500);
declare captainstaffno1 varchar(32);
declare captainstaffno2 varchar(32);
declare crwPilotInf varchar(500);
DECLARE leftSeat VARCHAR(200);
DECLARE rightSeat VARCHAR(200);
DECLARE controller VARCHAR(200);
DECLARE ti_code varchar(32);
declare flightNo VARCHAR(32);
DECLARE flightDate datetime;
declare to_airport varchar(32);
declare ld_airport varchar(32);
declare observers varchar(500) DEFAULT '';
declare observerIds varchar(500) default '';
declare observerText varchar(500);
declare observerNames varchar(100);
declare observerId varchar(100);
DECLARE leftSeat_SID VARCHAR(200);
DECLARE rightSeat_SID VARCHAR(200);
DECLARE controller_SID VARCHAR(200);
#定义游标
DECLARE cur1 CURSOR FOR select tiCode, FLIGHT_NO, datop, tiAirDromeBegin,
tiAirDromeEnd, tiLeftSeat, tiRightSeat, tiControl
from ODS.T_FLIGHT_SEGMENTS_REPORT WHERE datop between '2014-02-01' and '2014-02-28';
DECLARE CONTINUE HANDLER FOR NOT FOUND SET stop_flag=1;
open cur1;
WHILE stop_flag = 0 DO
FETCH cur1 INTO ti_code,flightNo,flightDate,to_airport,
ld_airport,leftSeat,rightSeat,controller;
SET @sqlexec:=concat('select CRWPILOTINF,CAPTAIN1,CAPTAINSTAFFNO1,CAPTAIN2,CAPTAINSTAFFNO2 into @crwPilotInf, @captain1, @captainstaffno1, @captain2, @captainstaffno2 from ODS.T_FLIGHT_REPORT_SPL where FLTIDS=\'',flightNo,'\' and DATE_FORMAT(FLTDATE,\'%Y-%m-%d\')=\'',flightDate,'\' and TO_AIRPORT=\'',to_airport,'\' and LD_AIRPORT=\'',ld_airport,'\';');
prepare stmt from @sqlexec ;
execute stmt;
deallocate prepare stmt ;
set crwPilotInf = @crwPilotInf;
set captain1 = @captain1;
set captainstaffno1 = @captainstaffno1;
set captain2 = @captain2;
set captainstaffno2 = @captainstaffno2;
SET @i = 1;
SET @count=CHAR_LENGTH(crwPilotInf)-CHAR_LENGTH(REPLACE(crwPilotInf,';','')) + 1;
IF IFNULL(@count,0) > 0 THEN
WHILE @i set observerText = SUBSTRING_INDEX(SUBSTRING_INDEX(crwPilotInf,';',@i),';',-1);
set observerNames = SUBSTRING_INDEX(SUBSTRING_INDEX(observerText,':',1),':',-1);
set observerId = SUBSTRING_INDEX(SUBSTRING_INDEX(observerText,'+',2),'+',-1);
select @i,observerText,observerNames,observerId;
if (observerText REGEXP captain1) > 0 then
select (observerText REGEXP captain1);
ELSEIF (observerText REGEXP captain2) > 0 then
select (observerText REGEXP captain2);
ELSEIF (observerText REGEXP leftSeat) > 0 then
update ODS.T_FLIGHT_SEGMENTS_REPORT a
INNER JOIN STG.IF_TASKINFOAIRCREWS_TMP b
on a.tiCode=b.TICODE set a.LEFTSEAT_PILOT_ID=b.SID
where b.TICODE=ti_code
and b.MNAME=leftSeat;
ELSEIF (observerText REGEXP rightSeat) > 0 then
update ODS.T_FLIGHT_SEGMENTS_REPORT a
INNER JOIN STG.IF_TASKINFOAIRCREWS_TMP b
on a.tiCode=b.TICODE set a.RIGHTSEAT_PILOT_ID=b.SID
where b.TICODE=ti_code
and b.MNAME=rightSeat;
ELSEIF (observerText REGEXP controller) > 0 then
update ODS.T_FLIGHT_SEGMENTS_REPORT a
INNER JOIN STG.IF_TASKINFOAIRCREWS_TMP b
on a.tiCode=b.TICODE set a.CONTROL_PILOT_ID=b.SID
where b.TICODE=ti_code
and b.MNAME=controller;
ELSE
SET observers = concat(observers, observerNames,',');
SET observerIds = concat(observerIds, observerId,',');
END IF;
SET @i=@i+1;
END WHILE;
END IF;
UPDATE ODS.T_FLIGHT_SEGMENTS_REPORT SET OBSERVER_PILOT_ID=observerIds, OBSERVER_NAME=observers
where FLIGHT_NO=flightNo and datop=flightDate and tiAirDromeBegin=to_airport and tiAirDromeEnd = ld_airport;
SET observers='';
SET observerIds='';
COMMIT;
END WHILE;
CLOSE cur1;
END
麻烦大神们都帮忙看看,问题出在哪里。怎么解决?
ps:没有c币了。各位慷慨一下

MySQLhandlesconcurrencyusingamixofrow-levelandtable-levellocking,primarilythroughInnoDB'srow-levellocking.ComparedtootherRDBMS,MySQL'sapproachisefficientformanyusecasesbutmayfacechallengeswithdeadlocksandlacksadvancedfeatureslikePostgreSQL'sSerializa

MySQLhandlestransactionseffectivelyusingtheInnoDBengine,supportingACIDpropertiessimilartoPostgreSQLandOracle.1)MySQLusesREPEATABLEREADasthedefaultisolationlevel,whichcanbeadjustedtoREADCOMMITTEDforhigh-trafficscenarios.2)Itoptimizesperformancewithabu

MySQLisbetterforspeedandsimplicity,suitableforwebapplications;PostgreSQLexcelsincomplexdatascenarioswithrobustfeatures.MySQLisidealforquickprojectsandread-heavytasks,whilePostgreSQLispreferredforapplicationsrequiringstrictdataintegrityandadvancedSQLf

MySQL processes data replication through three modes: asynchronous, semi-synchronous and group replication. 1) Asynchronous replication performance is high but data may be lost. 2) Semi-synchronous replication improves data security but increases latency. 3) Group replication supports multi-master replication and failover, suitable for high availability requirements.

The EXPLAIN statement can be used to analyze and improve SQL query performance. 1. Execute the EXPLAIN statement to view the query plan. 2. Analyze the output results, pay attention to access type, index usage and JOIN order. 3. Create or adjust indexes based on the analysis results, optimize JOIN operations, and avoid full table scanning to improve query efficiency.

Using mysqldump for logical backup and MySQLEnterpriseBackup for hot backup are effective ways to back up MySQL databases. 1. Use mysqldump to back up the database: mysqldump-uroot-pmydatabase>mydatabase_backup.sql. 2. Use MySQLEnterpriseBackup for hot backup: mysqlbackup--user=root-password=password--backup-dir=/path/to/backupbackup. When recovering, use the corresponding life

The main reasons for slow MySQL query include missing or improper use of indexes, query complexity, excessive data volume and insufficient hardware resources. Optimization suggestions include: 1. Create appropriate indexes; 2. Optimize query statements; 3. Use table partitioning technology; 4. Appropriately upgrade hardware.

MySQL view is a virtual table based on SQL query results and does not store data. 1) Views simplify complex queries, 2) Enhance data security, and 3) Maintain data consistency. Views are stored queries in databases that can be used like tables, but data is generated dynamically.


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

MantisBT
Mantis is an easy-to-deploy web-based defect tracking tool designed to aid in product defect tracking. It requires PHP, MySQL and a web server. Check out our demo and hosting services.

EditPlus Chinese cracked version
Small size, syntax highlighting, does not support code prompt function

SublimeText3 Chinese version
Chinese version, very easy to use

ZendStudio 13.5.1 Mac
Powerful PHP integrated development environment

SecLists
SecLists is the ultimate security tester's companion. It is a collection of various types of lists that are frequently used during security assessments, all in one place. SecLists helps make security testing more efficient and productive by conveniently providing all the lists a security tester might need. List types include usernames, passwords, URLs, fuzzing payloads, sensitive data patterns, web shells, and more. The tester can simply pull this repository onto a new test machine and he will have access to every type of list he needs.
