How to assemble a computer motherboard? How to assemble a philips computer?

Computer assembly may seem complicated, but in fact it can be completed easily as long as you master the steps. PHP editor Youzi will bring you an assembly tutorial for computer motherboards and Philips computers. From purchasing accessories to installation steps, he will explain in detail so that novices can easily get started. Read on to master the assembly skills and enjoy the sense of DIY accomplishment!

How to assemble a computer motherboard?

Pick up the chassis and lay it flat, grab the handle of the chassis baffle with your hand, pull it back, and the chassis baffle will be taken out.

1. Prepare tools and materials: You need to prepare all the tools and materials needed to assemble a computer host. This includes the computer host itself, monitor, keyboard and mouse, power supply, hard drive, memory stick, processor and radiator,

2. Open the host box: First, you need to open the host box for subsequent steps installation work. Usually, you can use a screwdriver to turn the screws on the corners of the main case, and then open the main case.

3. Install the power supply: The power supply is an important part of the computer host.

How to assemble a philips computer?

Put the three major pieces together normally, stuff them into the main case, hang them on the Philips monitor, light them up, and it should be OK!

How to assemble a computer host?

Seven major steps:

1/7 step-by-step reading

Prepare tools and materials: You need to prepare all the tools and materials needed to assemble a computer host. This includes the computer host itself, monitor, keyboard and mouse, power supply, hard drive, memory stick, processor and radiator, motherboard, optical drive and other accessories.

2/7

Open the main chassis: First, you need to open the main chassis for subsequent installation work. Usually, you can use a screwdriver to turn the screws on the corners of the main case, and then open the main case.

3/7

Install the power supply: The power supply is an important part of the computer host. It is responsible for providing power to the computer host. You need to install the power supply inside the main case and connect it to the motherboard.

4/7

Install the motherboard: The motherboard is the core component of the computer host and is responsible for connecting all hardware devices. You need to install the motherboard inside the main case and connect it to the power supply and other hardware devices.

5/7

Install the memory module: The memory module is an important part of the computer host. It is responsible for storing data and speeding up the computer. You need to install the memory stick into the memory slot on the motherboard and make sure the memory stick is securely in place.

6/7

Install the processor and radiator: The processor is the core component of the computer host and is responsible for processing all instructions of the computer. The role of the heat sink is to help dissipate heat from the processor to prevent it from overheating. You need to install the processor into the processor socket on the motherboard and install the heat sink over the processor.

7/7

Install the hard disk and optical drive: The hard disk is an important part of the computer host and is responsible for storing data. The optical drive is an accessory of the computer host and is responsible for reading the data on the optical disc. You need to install the hard drive and optical drive in the hard drive cage or optical drive slot inside the main case and connect them to the motherboard.

How to assemble aco computer?

Step 1 of assembling a computer

The first is the installation of the chassis, which mainly involves unpacking the chassis and installing the power supply in the chassis, then installing the motherboard and installing the motherboard on the chassis motherboard , assemble the computer and then install the CPU, insert the required CPU into the motherboard processor socket, and install the cooling fan, assemble the memory module in the computer, and insert the memory module into the motherboard memory slot.

Assemble the computer step 2

The next step is to install the graphics card, select the appropriate slot according to the graphics card bus; assemble the computer and install the sound card. Most of the mainstream sound cards in the market now are sound cards with PCI slots; The installation of drives mainly focuses on the installation of hard disks, optical drives and floppy drives; then there is the assembly of the connections between the computer chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, as well as the connection of power cables and data cables of hard disk, optical drive and floppy drive.

Step 3 of assembling a computer

The third step of assembling a computer is to close the chassis cover. Theoretically, after installing the host, you can close the chassis cover, but in order to avoid problems later For inspection, it is best not to cover it first, and then cover it after the system is installed. Then there is the installation of input devices. When assembling the computer, you also need to connect the keyboard and mouse to integrate with the host; the installation of output devices, that is, the installation of the monitor; and then Recheck each wiring connection and prepare for testing.

Step 4 of Assembling a Computer

Assemble the computer and power up the machine. If the monitor can display normally, it means that the initial installation has been correct. At this time, enter the BIOS for initial system settings. After completing the above steps of assembling the computer, the general hardware installation is basically completed, but to make the computer run, the following installation steps are required.

Step 5 of assembling a computer

The next step is to assemble the computer's partitioned hard drive and format the hard drive, and install the operating system, such as Windows 98 or Windows XP. After assembling the computer and installing the operating system, install drivers such as graphics card, sound card and other drivers; perform a 72-hour bake-in. If there is a hardware problem, it will be discovered during the 72-hour bake-in.

How to assemble a noc computer?

The steps to assemble a computer are as follows: 1. In the first step, open all the accessories and open the chassis.

2. The second step is to install the CPU and CPU fan, and place the memory module in the corresponding card slot.

3. In the third step, first install the motherboard foot nuts, and then place the motherboard into a stable chassis to fix it.

4. The fourth step is to arrange the cables according to the instructions.

5. The fifth step is to connect the power supply and the host assembly is completed.

6. The sixth step is to connect the host and the monitor. First connect the VGA cable to the monitor, and then fix the two screws at the back.

7. Step 7. After the fixation is completed, connect the other end of the VGA cable to the computer host.

8. The eighth step is to connect the power cord to the monitor, and the computer assembly process is basically completed.

How to assemble a computer mouse?

The steps are as follows:

1. First, prepare all the accessories of the wireless mouse, including: a wireless mouse, 2 batteries matching the wireless mouse, and a USB plug-in for the mouse.

2. The next step is to install the mouse battery. First, gently open the mouse cover. Note: Gently lift it off from the high-curved tail of the mouse. Do not lift it from the scroll wheel (left and right buttons) to avoid damaging the mouse.

3. After opening the mouse cover, you can see that there are two battery slots on the left and right inside. The above prompts the battery installation direction of the positive and negative poles. According to this prompt, insert the 2 batteries and install them.

4. After installing the battery, close the mouse cover.

5. Next, find the notebook USB socket and insert the USB plug-in for the mouse into it.

6. At this time, press the computer power button to turn on the computer. Then turn the mouse over, turn it on, and the prompt light will light up. Note: "I" means open, O means closed.

How to make money assembling computers?

Assembling computers is to earn the price difference of accessories and corresponding labor costs by assembling them for others.

In the past, the profit from assembling computers was relatively high. Now the prices are very transparent. Most of the money earned is labor costs. For a computer, you could earn four or five hundred in the past, but now two or three hundred is pretty good. , but if the quantity is large, it is still good. You have to think carefully to see if it is suitable for you.

How to assemble a computer neatly

I got a new computer after joining the company, and the configuration is pretty good. But every time I use a new computer or reinstall the system, the desktop always becomes a mess after a while. I must change this situation this time. How can this situation be improved? Just do it and think about it, this is not something that can be accomplished overnight.

First of all, to make the desktop look clutter-free, there must not be too many icons on the desktop. I still remember that I had a conceited roommate who had so many desktop icons that he almost filled up his desktop. It looked really bad. Therefore, I have to strictly control the number of icons. Only one column can be left on the desktop and one column is empty. So far, this visual effect is not bad. For some other software you need to use, you can search directly through the lower left corner. It is quite convenient. In fact, it is faster than searching for icons when you fill the desktop with them.

How to assemble a computer keyboard?

1. First of all, you need to understand the structure of the button. If the removed button is x, see what the structure inside is like. Align the direction of the keycap and press it against the bracket.

2. Use a little force and a click sound will appear, indicating that the installation is successful. Next, install the more complicated shift key. The two situations are slightly different. The bracket of the x key is directly connected to the keyboard, while the bracket of the shift key is connected to the keycap.

3. Now you need to remove the white bracket from the keycap. There are three parts in total, two white parts and a small steel wire. The small steel wire is connected to the inside of the keycap and does not need to be removed.

4. Combine the two white parts into one, and then install the integrated white bracket onto the keyboard. Note that there are buttons on the keyboard. Be careful when installing and remember to pull or pull hard.

How to assemble lenovo computer?

The specific installation steps are as follows

1. CPU installation

The CPU should be put down smoothly, then cover the iron cover, press the iron rod firmly into place, and the CPU installation is completed.

Then apply CPU cooling silicone evenly on the CPU

2. Install the CPU radiator

First, turn the four foot pins to the opposite direction of the arrow above. Then align the four empty spots on the motherboard and press hard to complete the installation of one position. Repeat four times.

If you want to disassemble the radiator, turn the four pins in the direction of the arrow above, then pull hard, repeat four times to disassemble.

3. The installation of the memory is very easy. Align the memory and the bumps on the memory slot, and press it with left/right force respectively. When you hear a small "pop" sound, the left/right slot will automatically open. , and then press the other side in the same way.

4, Power supply installation

Install the four screws of the power supply

5, Motherboard installation Use a screwdriver to press the screws into the reserved screw holes to fix the motherboard.

6, hard disk installation

You can choose the bay to install the hard drive. The general principle is to install it in the middle to ensure more locations for heat dissipation. Install four screws. If you are lazy, you can also install two on the diagonal.

7. Graphics card installation

Nowadays, independent graphics cards are not required to be installed. The CPU or motherboard has integrated graphics cards, so it is no problem to meet the basic requirements. Installing the graphics card is not difficult. Just remove the chassis baffle, insert it into the PCI-E slot, and then tighten the screws. If the motherboard has multiple PCI-E X16 slots (the longest one), give priority to the one closest to the CPU to ensure that the graphics card runs at full speed.

8, motherboard wiring

1. Motherboard power supply/CPU auxiliary power supply: align the bayonet position and connect

2. Front audio and front USB: align Plug in the fool-proof interface

3. The hard disk light, power light, power button, and restart button are installed according to the motherboard markings (color wire positive, black and white wire negative)

HDD LED represents the hard disk light , POWER LED is the power light, RESET SW is the reset button, POWER SW is the switch, and PC SPEAKER is the PC speaker.

4. Hard drives now basically have SATA interfaces. Just connect the SATA power cable (5PIN flat cable) and data cable.

5. Don’t forget to connect mid-to-high-end graphics cards. 6PIN or 8PIN auxiliary power supply

The above is the detailed content of How to assemble a computer motherboard? How to assemble a philips computer?. For more information, please follow other related articles on the PHP Chinese website!