When I turn on the computer, it always stops at the motherboard logo screen. Nothing happens when I press anything, and I can't enter the bios?

When the computer is turned on, it is stuck on the motherboard logo interface and cannot enter the BIOS or operating system, which is a headache. PHP editor Xigua will discuss this issue in depth for you, analyze the possible causes, and provide practical solutions to help you solve this annoying problem. Read on to learn how to fix this issue and get your computer back up and running.

The computer always stops at the motherboard logo interface when I turn on the computer. Nothing happens when I press anything, and I can't enter the bios?

This is usually because the BIOS battery voltage is too low, and the system time returns to the BIOS preset time, such as 2000.1.1, 00:00. You can use it after pressing F1 to enter the bios and set the time. Do not turn off the AC power after shutting down at night. Generally, the system time will not be lost when you turn on the computer the next day, and you can still enter the system normally. If the AC power is cut off, the battery voltage cannot sustain the power consumption of the bios, and the computer will be in the same state again the next day when it is turned on. Replacing the bios battery is the ultimate solution.

Win11 is stuck on the motherboard logo interface when booting?

1. It is a problem with bios settings. We only need to find the corresponding setting items to solve the problem. First press the bios startup button, then we can select Chinese mode and click "Advanced Mode" at the bottom.

2. Click "Start" in the bios menu bar, find "If an error occurs, wait to press the F1 key", and select "Close" from the corresponding option on the right.

3. Press f10 to save and restart the computer.

　

Stuck on the LOGO interface and unable to enter the system?

The computer always stays on the motherboard LOGO interface when it is turned on, indicating that problems are found during the power-on self-check process and need to be checked one by one to solve the problems before the system can be entered normally.

1. If the motherboard LOGO is displayed when the computer is turned on and the system cannot be entered, you need to restart and press the TAB key to skip the LOGO screen or continuously press the DEL key (F2 or other designated hotkeys for notebooks) when turning on the computer to enter the CMOS setting interface. Turn off FullScreenLOGOShow (full screen display of LOGO) in the AdvancedBIOSFeatures tab, see if the power-on self-test information can be displayed, and then determine the problem.

2. Under normal circumstances, you can press the F1 key to skip non-fatal errors and directly start the computer according to the black screen and white text prompts, or press the DEL key to enter CMOS, and then press F9 to load predefined parameters or select LoadOptimizedDefaults (load high-performance default values) or LoadFail-SafeDefaults (load fail-safe default values), and then press F10 to save, exit and restart.

3. If the originally set CMOS parameters are not saved after the power is turned off or the system time in the CMOS is restored to the factory time, it may be that the motherboard battery has failed. You need to replace the battery and then refer to step 2 to load the preset. Define parameters and save.

4. If the above operations are ineffective, it means there is a problem with the hardware. Generally, the memory is in poor contact due to oxidation, or the hard disk may be in poor connection due to poor connection or the hard disk master boot record is damaged. The memory needs to be re-plugged or unplugged. Hard disk, or repair the hard disk master boot record, or reinstall the system or replace the hard disk.

The computer is stuck at the logo screen when it starts up?

The computer is stuck on the motherboard logo screen when it is turned on, which may be caused by the following reasons:

1. The system and software are incompatible or damaged: try to reinstall the operating system, you can use the installation CD or USB Startup disk for system recovery or reinstallation.

2. The machine's internal hard disk fails: Check whether the hard disk is connected normally. You can try to replace the hard disk or use other available hard disks for testing.

3. USB peripheral failure: Unplug all external USB devices, including mouse, keyboard, printer, etc., then restart the computer to see if you can enter the system normally. If possible, reinsert peripherals one at a time to identify the faulty device and replace or repair it.

4. The memory is oxidized or damaged: Take out the memory stick, wipe the golden finger part with an eraser, and then reinsert the memory stick. If the problem persists, you can try replacing the memory module.

5. The motherboard’s built-in sound network card is faulty: If none of the above methods work, it may be caused by a motherboard fault. It is recommended to replace the motherboard or contact professional maintenance personnel for repair.

Please note that before performing any operation, please make sure you have backed up important data. If you are not sure how to operate or do not have the relevant repair knowledge, please consult a professional or seek professional repair services.

The computer startup stays at the logo interface?

Method 1: Poor contact

Whenever you encounter a problem where the computer is stuck on the LOGO screen when starting up, the first thing to check is the problem with the externally connected device. For example, keyboard, mouse, camera, USB wireless network card, mobile hard disk, U disk, etc., all external USB devices and PS/2 interface devices. You can try to unplug all external devices such as keyboard and mouse, then unplug the power supply. Press and hold the power button for about 5 seconds, then reconnect the power supply and turn on the computer again.

Method 2: Automatic repair

If you still cannot enter the system normally, press F8 immediately after booting to see if you enter the Security Center or configure the correct method for the last time. If so, the system will automatically repair the registry and recall the first time. What operations have been done when an abnormality occurs during the period, and if it is suspected that a certain system software (or driver software) is causing the problem, uninstall it, then exit normally, and then restart, you should be able to enter the normal state. Way.

Method Three: System Reinstallation

System City provides you with download addresses for win7 system, win8 system, win10 system, win11 system, and win xp system. It is recommended to use Fat Claw Installation Master to assist the installation. , for specific tutorials on USB disks, please see the following steps. If you don’t have a USB disk, you can refer to this tutorial: How to quickly install Windows 11 system without a USB disk (applicable to notebooks and desktop computers of various brands and configurations)

When the computer is turned on, it will always get stuck on the motherboard logo interface, and then it needs to be forced to restart to enter the system. Does anyone know how to do this?

1) First soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there are still problems when booting? If you are not installing drivers, patches, and software step by step, don't install anything that is inappropriate.

Please note: If you install drivers, patches, software, etc. after restoring the system or reinstalling, be sure not to install the things that affected your accident this time, otherwise the restoration or reinstallation will be in vain. .

2) If it is caused by a hardware problem, it is recommended to have it checked.

3) In addition, is it related to your improper operation before shutting down? For example: playing games, watching videos, operating large things, using the computer for a long time caused by card? Or if you download something inappropriate, the malfunction won’t happen for no reason, right?

If this problem is caused, try turning the machine on and off repeatedly, and leave it for a while. If it really doesn't work, just reinstall the system. If you can't reinstall it yourself, spend 30 yuan to find a repairman at a repair place. Help you.

As long as you pay attention to your computer not to freeze, blue screen, or suddenly shut down, it will not be like this when you start it up.

If you have any questions, please ask me.

The computer keeps getting stuck on the motherboard logo interface, why?

Stuck on the boot interface, it means that the hardware has not passed the bios test and has nothing to do with the system. It can only be a hardware failure. Being able to enter the logo interface at least indicates that the CPU, motherboard and graphics card are good. The problem is poor memory, hard disk cable error or hard disk damage. There are many cases where the hard disk is stuck.

Both cases will freeze the computer -----Troubleshooting, 1---Re-insert and install the memory, and only use a single memory to work. At the same time, unplug the hard drive cable.

2----Re-unplug the hard disk cable, change the connection position, and observe the effect. If the hard disk is unplugged, the computer can complete the third page of detection and enter the English warning interface (no hard disk, warning to set startup items) But when the hard drive is connected and it freezes, it means there is a problem with the hard drive and the hard drive needs to be replaced.

What should I do if the computer is stuck on the motherboard LOGO interface and cannot be entered?

Cause of failure 1: Computer system failure. The computer's operating system is installed with many software that we use daily. These software are incompatible with the system. Some malicious plug-ins may be installed when browsing the web, or Trojan viruses may cause the system to fail to boot normally. As a result, the stuck logo appears on boot.

Judgment and solution: Just reinstall the computer system directly.

System damage leads to card LOGO phenomenon

Cause of failure two: The machine’s internal hard disk failure. This situation is relatively common, especially for mechanical hard drives that have been used for a long time. Because long-term use of the hard disk will inevitably cause hard disk failure. At this time, when the motherboard is turned on, the motherboard bios repeatedly detects the hardware and finds that the computer hard disk is damaged and cannot complete the self-test, which leads to the card LOGO state.

Judgment and solution: Remove the hard drive and turn it on again. If the LOGO is not stuck at this time, it means that the hard drive is indeed broken. The solution is to replace it directly.

Hard disk failure causes computer startup stuck logo

Cause three: There is a problem with the computer’s external USB device. For example, problems with commonly used USB external devices such as computers' external USB flash drives, keyboards and mice, printers, scanners, tax control disks, etc. may cause the motherboard and BIOS self-test programs to fail when the computer is turned on again, unable to complete the self-test and enter the system. The status of the card LOGO cannot be entered into the system.

Judgment and solution: Remove all external USB devices from the computer, power on the computer again, and see if the logo is stuck on the computer at this time. If it is no longer stuck, there is a problem with one of the USB devices. By repeatedly plugging in a single USB device and testing it, you can find out which device has the problem. The solution is to replace the device.

USB peripheral failure causes boot card logo

Fault reason four: The computer memory is in poor contact or damaged. When the computer is turned on, the motherboard BIOS has an error when detecting the memory address, and the startup LOGO position may be stuck and cannot be accessed.

Judgment and solution: We can usually solve the problem by disassembling the back cover of the computer, removing the memory, wiping the gold finger clean with an eraser, reinstalling the memory and turning on the computer. If the card logo is still stuck, you can try replacing a memory stick.

Notebook memory location

Desktop memory location

Fault reason five: The built-in sound card or network card of the computer motherboard is faulty. Today's computers, whether they are laptops or desktops, all have built-in network cards and sound cards. If either of them has a hardware problem, the motherboard will detect hardware abnormalities when it is turned on, causing the card logo to fail to boot.

Judgment and solution: You can try to find in the BIOS menu whether there is a setting to disable the built-in sound card or network card. You can disable it and try to turn it on again. If there are no such menus, the only solution is to find a motherboard with similar parameters and replace it. One thing to note here: Because motherboards are relatively expensive, there are generally no relevant spare parts for home or office use, so you can use a nearby computer repair shop to help replace them.

The motherboard’s built-in sound card network card fails, causing the card LOGO

Cause six: There is an internal failure in the motherboard CPU. Although this problem is relatively rare, there are cases. The main reason why the CPU is damaged is because of the aging caused by poor internal circuit performance during long-term use, causing the computer to freeze when it is turned on, resulting in a stuck LOGO phenomenon at boot and the inability to boot.

Judgment and solution: The CPU is the core component of the computer, and it is also a relatively expensive component. The judgment and solution of this component can only rely on the help of professional maintenance personnel.

CPU has been working for a long time and internal aging has caused the card logo

Fault reason seven: Caused by the computer’s power supply. Desktops generally have a built-in ATX power supply, while notebooks use an external power adapter. Because this component works in a high temperature environment for a long time, it will cause the internal components to age and reduce performance, causing the output voltage to be unstable. When the motherboard is turned on, the bios detection hardware will appear. An error message appears when entering the card LOGO interface and the computer cannot be turned on.

Judgment and detection method: You can replace the built-in ATX power supply or external power adapter of the same specification or model instead of testing whether it is normal and the LOGO is not stuck. If it can solve the problem, just replace it directly.

The above is the detailed content of When I turn on the computer, it always stops at the motherboard logo screen. Nothing happens when I press anything, and I can't enter the bios?. For more information, please follow other related articles on the PHP Chinese website!