MSI motherboard turns off uefi

Steps to set up uefi startup

UEFI startup requires first placing the startup file in the FAT format primary partition, and then specifying the startup file under the partition for startup. Just specify "FAT partition\EFI|BOOT|BOOTX6EFI" as the specified file to start the system.

The first step is to keep pressing the delete key, and then press the power off key. In the second step, select the advanced mode in uefi, then select boot, and click uefionly. The third step is to return to boot, click safe mode, and select uefionly. The fourth step is to press F10 and click the second option.

Setting the boot device in UEFIBIOS is very simple. The following are the specific steps: Step 1: Enter the UEFIBIOS setting interface. To enter the UEFIBIOS setting interface, you need to press a specific shortcut key when booting. The specific shortcut keys vary by computer make and model.

The win10 operating system is installed, but cannot be booted, and this page appears. According to the prompt below, pressing F8 does not work at all. You can only "press esc to specify UEFI firmware settings". Press esc on the keyboard to enter the motherboard settings. Click "Bootmenu (F8)". The interface appears.

How to turn off UEFI mode

Common setting options for turning off UEFI boot: Restart the computer and press Del, FF1 and other keys to enter the BIOS. For different brands of computers, go to Baidu to check how to enter the BIOS interface when booting.

Press the → arrow key to go to "Security", select SecureBootControl and press Enter, change it to Disabled; then switch to "Boot", select LaunchCSM and press Enter, change it to Enabled, press F10 to save and restart.

First enter the BIOS interface (press and hold the del key when windows starts). When windows starts: THE SYSTEM FOUND UNAUTHORIZED CHANGES ON THE FIRMWARE, OPERATIONG SYSTEM OR UEFI DRIVERS. Press F7 or click the enter advanced mode button, and then select 'Startup' tab.

MSI motherboard startup mode legacy uefi

Press the DELETE key when booting to enter the BIOS setting page. Use the arrow keys to select the Boot option and press Enter to enter. Find the Boot Mode Select option in the Boot options and select Legacy UEFI. Find the Boot Option Priorities option in the same interface and press Enter to enter.

Method 1: Restart MSI computer by entering bios through shortcut keys. During the restart process, press the del key continuously after seeing the MSI logo. Which key to press to enter the BIOS in MSI_How to enter the BIOS mode in MSI Whether it is a desktop or a notebook, press the delete key. There is usually a prompt at the bottom of the screen.

Turning on WHQL belongs to LegacyBIOS and uefi boot. Assuming that the hard disk format is GPT mode with EFI partition booting, it is estimated to be visible and the system is W10. It is estimated that the original hard disk is in MBR mode and can only be used in LegacyBIOS booting.

It depends on the situation of MSI motherboard uefi and uefi legacy. Mainly depends on the hard drive mode and motherboard settings. For legacy, the hard disk requires mbr partition table, and for uefi boot, hard disk partition table gpt is required.

: Determine whether the current system is installed in traditional Legacy mode. If the system is in this mode, the BIOS may recognize that it is running in compatibility mode for easy compatibility.

Enter the BIOS and enter the "Boot" item. Default "Boot Mode" to "UEFI", change it to "Legacy Support", and press Enter. Default "Boot Priority" to "UEFI First", change it to "Legacy First", and press F10 to save.

MSI enter safe mode

msiclickbios5 Set up safe boot msiclickbios5 Set up safe boot Take Z390 as an example, restart and press DEL to enter BIOS, press F7 to enter advanced mode, click the option to enter Settings.

The specific steps to enter safe mode in win10 are as follows: First, we open the computer desktop and choose to restart the system. Then we enter the menu options, select Troubleshooting and then we select Advanced Options. Then we select startup settings here. Press the shortcut key on your computer to open the "Run" window.

msiclickbios5 Set up secure boot and press the del key. According to msiclickbios5 official website information, when booting, the motherboard interface appears, press the del key to enter the BIOS settings, then enter the advanced settings, set up secure TrustedComputing, and then save the settings, so msiclickbios5 sets the safe boot and press the del key.

The motherboard model is indeed H310M S2. If so, first enter the BIOS, then find "CSM Support" in the "BIOS" menu bar and change it to disabled. Then the option for secure boot mode (Secure Boot) will appear below. Just enable the option according to your needs.

The above is the detailed content of MSI motherboard turns off uefi. For more information, please follow other related articles on the PHP Chinese website!