After turning on the computer, the screen goes black with only the mouse

After the computer is turned on, the display screen is black with only the mouse.

1. First of all, it may be a hardware problem. The hardware itself has too many bad sectors, so only the mouse can display. In this case, you can use a USB flash drive to test the hard drive. If there are too many bad sectors, the only way is to replace the hard drive. Furthermore, it may be that the C drive memory is full. After powering on, the monitor screen is black (only the mouse), as shown in the picture.

2. "After the computer is turned on, the display screen is black and only the mouse is left." This phenomenon means that the system is loading, and you can enter the desktop after the loading is complete. When this situation occurs, it is judged that there is a problem with the system, such as too much system garbage, too much redundancy, or system hardware problems; such as a certain block of memory is damaged, a certain area of ​​the hard disk is damaged, etc.

3. Cause of the fault: There are too many files in the computer and the data is processed incorrectly. Generally, the mouse appears indicating that some of the data is correct. Solution: Press the shortcut key Ctrl Alt Del in the black screen state to enter the Task Manager. Then click on the file, create a new one, and enter explorer in the pop-up Create New Task.

4. After the computer is turned on, the display screen is black with only the mouse arrow. What is going on? This is because the Explorer resource manager has not started. The solution is to start the task manager first, and then manually start the Explorer resource. Manager will solve the problem.

5. When we see that there is only a mouse on the desktop, we can assume that the browser is not open. If the screen is completely black, it is caused by a software or hardware failure. First, Ctrl Alt Delete key to open the Task Manager window. There is a new task in the lower right corner, click on it. Then a window to create a new task will pop up.

How to fix a computer that won’t turn on and keeps a black screen and only the mouse is visible

My computer has a black screen when it turns on and only the mouse. If you don’t know much about computers, the easiest way is to force shutdown. , after shutting down and then turning on again, there will be no problem.

How to fix the problem that the computer won’t turn on and the screen remains black. Only the mouse is visible. Solution: Rebuild the task manager and press the CTRL ALT DEL keys at the same time to open the task manager. Click the File option on the menu bar and click New Task. Enter explorer.exe in the pop-up dialog box and click OK.

If the computer can boot normally and the brand LOGO appears, but the screen goes black when entering the system, it is recommended that you try to restore the system and troubleshoot the system fault. If the machine comes with a genuine system backup, it is recommended that you turn on the machine and press F4 to enter the restore interface, and select restore or complete restore.

What to do if the computer starts up with a black screen and a mouse. Method 1: Restart the computer, press F8, enter the startup menu, and select "Use last known good configuration" to start the computer.

After the computer is turned on, the screen goes black and only the mouse can move. The system files are damaged and the system needs to be reinstalled. The following mainly introduces two methods to reinstall the system: U disk reinstallation system preparation: a normally booted computer and a U disk download "U Master" from Baidu (Lao Maotao, Dabaicai can also be used), download and install this software On the computer.

There are two situations when the computer is turned on and only the mouse is used. One is that there is a flashing cursor in the upper left corner, and the mouse can be moved or cannot be moved in the middle. In this case, it can basically be determined that the boot of the computer system is broken. , it is possible to fix it.

The computer turns on and the screen goes black, with only a mouse pointer. What should I do?

Because most black screens are basically caused by a service in Windows, restarting the computer can solve the problem of a black screen with only a mouse pointer. . Method 2: Turn on the computer, long press "shift", select safe mode in the menu, log in normally and open it, then restart the computer, and that's basically it.

Press the restart button on the computer, then press and hold F8 on the keyboard. Press the arrow keys on the keyboard to select the first option in safe mode in Figure 2. After entering the desktop, click the Control Panel in Figure 1 and select Uninstall in Figure 2.

After the computer is turned on, the display screen is black with only the mouse arrow. What's going on? This is because the Explorer resource manager has not started. The solution is to start the task manager first, and then manually start the Explorer resource manager. , the problem will be solved.

The computer starts up with a black screen and only a mouse arrow. The reasons are as follows: First, check whether the host power cord and the monitor cable are not connected properly. After they are connected, the main page should be displayed.

The solution to a black computer screen with only one mouse arrow is as follows: Tools/Materials: Dell XPS13-9350-370win Task Manager. Press the shortcut key ctrl alt del to open the task manager, then click on the file and then click on Run New Task.

The solution to a black screen with only one mouse arrow when the computer is turned on is as follows: Press the shift alt delete key or shift ctrl esc key at the same time to call the task manager program. Open Task Manager, then select the "Processes" tab and find the explorer.exe process among the processes.

Why does the black screen only show the mouse pointer after the computer is turned on?

1. Because most black screens are basically caused by a certain service in Windows, restarting the computer can solve the black screen. Mouse pointer problem. Method 2: Turn on the computer, long press "shift", select safe mode in the menu, log in normally and open it, then restart the computer, and that's basically it.

2. "After the computer is turned on, the display screen is black and only the mouse is left." This phenomenon means that the system is loading, and you can enter the desktop after the loading is complete. When this situation occurs, it is judged that there is a problem with the system, such as too much system garbage, too much redundancy, or system hardware problems; such as a certain block of memory is damaged, a certain area of ​​the hard disk is damaged, etc.

3. When the computer is turned on, only the mouse will appear in two situations. One is that there is a flashing cursor in the upper left corner, and the mouse can be moved or cannot be moved in the middle. In this case, it can basically be determined that the computer system is booting. If it's broken, it's possible to fix it.

Why does the laptop have a black screen with only a mouse pointer when it starts up?

1. Because most black screens are basically caused by a certain service in Windows, restarting the computer can solve the problem of a black screen with only a mouse pointer. Problem. Method 2: Turn on the computer, long press "shift", select safe mode in the menu, log in normally and open it, then restart the computer, and that's basically it.

2. First of all, it may be a hardware problem. The hardware itself has too many bad sectors, so only the mouse can display. In this case, you can try using a USB flash drive to test the hard drive. If there are too many bad sectors, the only way is to replace the hard drive. Furthermore, it may be that the C drive memory is full.

3. The black screen when the computer starts may be caused by damage to the motherboard, monitor and graphics card in the computer, or the computer configuration is too old. This phenomenon may also occur. Most of the reasons are caused by process errors. You can follow the steps below to troubleshoot.

4. The notebook screen is black. There may be a software or hardware problem. 1. Black screen caused by software. Sometimes after installing some software or hardware drivers, you may find that after restarting, the computer cannot enter the system and the screen remains black. In this case, the laptop screen is black due to software.

The above is the detailed content of After turning on the computer, the screen goes black with only the mouse. For more information, please follow other related articles on the PHP Chinese website!