How to set up the hard drive to boot on a Dell computer

How to set the hard disk as the first startup item on Dell's desktop computer

1. The method for Dell computer to start from the hard disk is: first, use the shortcut when the computer starts Key settings, when booting into the LOGO screen, immediately press the F2 key in the upper left corner of the keyboard to enter the BIOS main interface, usually when the logo screen appears. Then, there will be a prompt to enter the BIOS button in the lower right corner of the screen.

2. The first step is to restart the computer. When you see the Dell logo, press the Dell key to enter the BIOS. In the second step, after entering the BIOS interface, find and click to select System Summary and press the enter key. The third step is to find Sata drive 012 and check whether the solid-state drive you installed has been recognized by the computer.

3. Press delete until you turn on the computer and enter bios. Right-click on the keyboard and go to boot, and then you can see the first boot and the second boot. Then select SSD as the first boot. If the SSD is installed to the original hard drive location, set the hard drive to boot first.

4. Dell desktop BIOS setting method: Generally, set the U disk as the first boot item. Press the DEL key to enter the BIOS main interface and select Advanced BIOS Features.

5. First, take Dell computer as an example. When the dell icon appears when booting, press and hold F2 to directly enter the BIOS interface. Then find the settings-general-boot sequence in the list on the left.

How to set the default startup item in Dell notebook bios to hard disk startup

1. The first step is to restart the computer. When you see the Dell logo, press the Dell key to enter the BIOS. In the second step, after entering the BIOS interface, find and click to select System Summary and press the enter key. The third step is to find Sata drive 012 and check whether the solid-state drive you installed has been recognized by the computer.

2. We first start our Dell computer. After the DELL logo appears, click F2 to enter the Bios setting interface. After entering the Bios settings interface, we select startup item settings. After entering the startup item settings, we see that the right side is our current startup sequence. We select the boot items we want to change the order of, such as USB devices.

3. You can perform the operation through the following steps: First, if we turn on the computer, we need to restart the computer at this time. If the computer is not turned on, just press the power button. (PS: Try to close all programs, which will cause the least damage to the computer. Let’s take the thinkpad computer as an example.

4. Hello,\x0d\x0aIt is recommended that you must install the original Windows operating system. Do not Use the Ghost version of the operating system, because most of these operating systems are streamlined systems with very poor stability and compatibility.

5. Dell computers can be set to boot from the hard disk by entering the bios. You can do this through the following Method to set hard disk startup as the first startup item: Turn on the power, and then observe the screen prompts. Before starting the system, press "F2 to perform BIOS settings. Set the startup mode. This setting screen is the BIOS settings.

What is the method for setting the first boot disk of SSD in Dell BIOS? Select ssd at first startup. If the ssd is installed to the original hard drive location, set it to harddrive as the first startup.

Press F1 to enter bios when booting. Enter the bios page, press the keyboard → move the button right to Startup, and then Move down to Primary Boot Sequence. When you see the hard disk, adjust the hard disk that needs to be set as the first boot. Down the arrow key, move to the hard disk that needs to be adjusted, press the symbol on the numeric keyboard, and move up.

Dell desktop BIOS setting method: Generally set the U disk as the first boot item. Press the DEL key to enter the BIOS main interface and select Advanced BIOS Features.

Second, after restarting, you will see that the solid state drive will become System startup disk, and then you can delete the folder in the original C drive.

First turn on the computer and press F2 to enter the BIOS interface. Click on Secure Boot as shown, select Secure Boot Enable, and uncheck Secure Boot Enable on the right. Click Apply in the lower right corner to save, restart the computer, and press F2 again to enter the BIOS.

Before booting into the system, tap F2 continuously to enter the BIOS. Under the Boot menu of the BIOS, change Secure Boot to Disabled and change the Boot List Option to Legacy.

The above is the detailed content of How to set up the hard drive to boot on a Dell computer. For more information, please follow other related articles on the PHP Chinese website!