I just installed a new computer and there is no core display. Cannot light up. There is a discrete graphics card but no driver. The computer cannot be turned on...
You need to use the integrated graphics card to light up and set PCIE priority startup in the motherboard BIOS to find the independent graphics. First find the option with the word "Graphics" and adjust the parameters to "PCI-Onboard" -PEG”.
If the independent graphics card does not have a graphics driver installed, the display resolution is the standard VGA resolution; after installing the matching graphics driver, you can select the best resolution output.
It can be booted without a driver. Normally, the computer does not load the driver when it is turned on, so it is no problem to light up. However, many software cannot be used without the driver installed, and of course the game cannot be played.
As shown in the picture above, if you want the integrated graphics card to work normally, the most intuitive way is to first remove the independent graphics card in area 2, and then connect the monitor to the graphics card interface shown in area 1. After booting, you must Supplement the driver for the integrated graphics card.
Check whether the signal cable of the monitor is connected to the graphics card output interface. If the graphics card driver is not installed, you need to download the corresponding driver from the graphics card official website to install and use. Unplug and plug in the graphics card multiple times Just wipe the gold finger of the graphics card with an eraser several times or forcefully.
If the motherboard of another model still cannot light up, you can contact the seller or after-sales personnel to detect the fault of the graphics card (the motherboard or CPU with core You can also disconnect the independent graphics card to see if it can be turned on normally. If not, first check the hardware, memory, CPU installation on the motherboard, etc.).
How to install the graphics card driver for a newly installed computer
1. Open the main case and observe the structure inside. Find the location of the graphics card slot. Use a screwdriver to remove the baffle and screws on the main case. Insert the graphics card into the card slot of the graphics card. Be careful to install it when installing. The small clip on the top. After it is installed in place, make sure the graphics card is inserted properly and not incorrectly.
2. The independent graphics card does not need a driver to light up, but it only has a lighting function and cannot switch to high resolution. Even with a high refresh rate, 3D acceleration cannot be turned on. When the computer is turned on, go to the official website of the graphics card to download and install the driver.
3. First, if the system cannot recognize the network card by default, you may need to Download the network card driver. Secondly, you mainly need to download the NVIDIA graphics card driver and NVIDIA sound card driver.
4. Click on Computer, right-click Management, select Device Management, as shown in the figure. Enter the Device Manager , right-click on the graphics card with the exclamation mark and select Update Driver. Right-click and select Update Driver, as shown in the figure below. Browse the computer to find the driver software, as shown in the figure below.
5. General .EXE The suffix is Wenchang. You can directly click on the installation and keep pressing Next. If there is an old graphics card driver before installation, the screen will be blurred when reinstalling it at this time. If there is an old graphics card driver before installation, first click My Computer.
6. Open "Drive Life 2012" during computer installation, click Driver - Driver Management - Driver Uninstall - Uninstall the graphics driver - and then restart (or manually delete all graphics drivers and files currently on the computer, be sure (Delete it first) Restart. If the system prompts you to install the graphics card driver, just click Driver Life One-Click Update to install the driver.
How to install the independent graphics card driver
Step 1: Determine your graphics card model Before installing the driver, you need to determine your graphics card model. If you don't know your graphics card model, you can right-click a blank space on the desktop and select "Properties" or "Screen Resolution" in the pop-up menu.
The following are the detailed steps on how to install the graphics card driver: Step 1: Check the existing graphics card driver. Before installing a new driver, you must first check the graphics card driver currently installed in the computer. This can be done by opening the Device Manager in your computer. In Device Manager, find Display Adapters and click Expand.
Step one: Find and right-click the "Computer" icon on the desktop, select "Properties" and click Open. Step 2: Click on the first "Device Manager" and open it. Step 3: Find and click the small triangle arrow in front of "Display Adapter", usually the last item.
The independent graphics card always has an exclamation mark because the graphics card driver installation version is wrong. This can be solved by reinstalling the driver software. The specific steps are as follows: First, we need to right-click the computer and right-click Select the Device Manager option in the menu bar, and then enter the Device Manager interface.
Taking the NVIDIA driver as an example, first open the browser and enter NVIDIA's official website to download the driver. Open the downloaded NVIDIA graphics card driver and it will automatically detect whether the system is compatible. Click Agree and Continue to agree to the installation agreement to continue installing the driver. Then click on the Customize option.
How to install the driver when changing the graphics card without core display
If there is no core display, install the independent graphics card, connect the monitor cable to the independent graphics card, and connect all external power supplies. The rated power consumption of the power supply is sufficient If used, it will light up when turned on.
How to install Intel core display driver: Manual installation: Start Control Panel, click Hardware and Sound, and then click Device Manager. Expand Display Adapters, right-click the Intel Graphics entry, and click Uninstall.
In this case, you first need to purchase an independent graphics card and install it on the computer motherboard before booting. After booting, use the driver wizard or driver life software and follow the normal procedures to install the driver for the independent graphics card. If you do not install independent graphics and do not have core graphics, the computer itself cannot be turned on, let alone installing the driver.
What to do if there is no graphics card driver
1. Right-click on the computer - Management - Device Management - Find the graphics card with driver problems - Upgrade the driver and use the system's own ability to install the driver. Installation repair. Go directly to the graphics card official website to download the corresponding driver and install and update it. Use third-party driver software such as Driver Wizard to install it.
2. Usually, just update your own software or reinstall the graphics card driver and it will be fine. The display adapter type is Microsoft Basic Render Driver, which is the name of the default driver that comes with the system. The core graphics driver is not installed. It is recommended to download third-party software such as Driver Wizard to find the driver corresponding to the core display and then restart it.
3. It cannot be used without a graphics card driver in the computer system. The graphics card driver is a command language used to communicate between the computer control system and the graphics card hardware. Through this command tool, control commands are issued to make the graphics card perform related tasks. Without the driver, the connection cannot be established, and the screen is black when booting.
4. The method can be to install the graphics card driver by installing third-party software, such as Driver Wizard, Driver Life, and Master Lu, which can meet the purpose of installing the driver. Method: Log in to the official website of the graphics card, download the corresponding driver and install it. Or search online for the corresponding driver for the graphics card, download and install it.
5. Installation method Generally, the graphics card driver is included in the accessory CD of the computer configuration and can be installed directly.
6. First, install it with the driver CD that comes with the machine! Second, if not, first find the graphics card driver. Once you have access to the Internet, go to the website to download it.
The above is the detailed content of How to install graphics card driver without core display. For more information, please follow other related articles on the PHP Chinese website!

新系统win11给用户带来了许多优化和新特性,但是在连接共享打印机的时候可能会遇到错误代码0x00000bc4的问题,从而导致打印机无法连接、无法打印。那么共享打印机0x00000bc4要如何解决呢??来看看以下的处理方法吧。方法一、打印机共享(同操作系统):1、所有客户机设在同一网段内,如都在192.168.1.*网段内(路由器IP是192.168.1.1的话);2、所有客户机设在同一工作组内,如都在WORKGROUP;关闭WIN7的密码保护共享:打开网络和共享中心,选择更改高级共享设置,向下

更换显卡需要重新安装驱动吗1、是的,在更换显卡后通常需要安装新的驱动,以使显卡能够正常工作。首先,你需要卸载原来的1650s显卡的驱动。可以通过控制面板中的设备管理器或者使用专门的驱动卸载软件来完成。2、需要。新显卡和老显卡不是同一种显卡,那么必须要卸载原有显卡驱动程序,安装新显卡的驱动程序。显卡是电脑进行数模信号转换的设备,承担输出显示图形的任务。3、有些显卡驱动微软带了就不需要安装了。会自动安装的。是否要安装:如果你现在装的板载显卡驱动能适合独立显卡,不用重新装,不过就算能用,性能也不可恭维

老式台式电脑没有无线连接怎么办1、在桌面右键点击“网上邻居”,选择属性菜单;后右键单击“无线网络连接”选择“属性”,进入无线网络连接属性对话框。在可用无线连接列表里找到对应的网络热点,双击。并输入密码。此时网络即可连接。2、首先打开控制面板,然后选择网络和共享中心,接着选择左侧的“更改适配器设置”,然后查看无线网络连接是否被禁用,如果被禁用了就重新连接。3、先将USB无线网卡插入台式电脑的任一USB接口中,电脑检测到USB无线网卡后会自动检测USB无线网卡驱动。当无线网卡驱动安装完成后,插入US

一台新组装的电脑,从安装系统到安装各个硬件驱动的顺序是怎么样的...首先是准备组装的零组件:CPU,CPU散热器,内存,主板,显卡,硬盘,光驱,电源,机箱,除了上述这些东西,你还需要一把大小长短适中且好转的十字螺丝起子,还有平坦的桌面。安装操作系统:首先需要安装操作系统,例如Windows、Linux等。可以使用安装光盘或者U盘进行安装。安装驱动程序:安装操作系统后,需要安装电脑硬件的驱动程序,例如主板驱动、显卡驱动、声卡驱动等。安装向导正在安装驱动程序中,请等待安装完成。部分驱动程序可能会需要

导读:本篇文章将为大家介绍关于在Mac上使用单硬盘安装双系统的相关内容,希望对大家有所帮助。让我们一起来了解吧。mac不用u盘装双系统怎么装|mac不用u盘安装双系统教程1、运行Setup,打开BootCamp安装程序,执行驱动安装;驱动安装完毕后,点击是,立即重启系统,双系统安装完毕。在Mac电脑上安装双系统的步骤如下:首先,确保Mac电脑上有足够的可用存储空间,并下载所需的操作系统安装镜像文件。接下来,打开“应用程序”文件夹中的“实用工具”文件夹。在苹果电脑上下载Win10镜像文件,或使用U

win7系统如何调出摄像头(笔记本win7系统如何调出摄像头)运行QQ软件来打开摄像头。在系统设置中选择视频设置,选择好视频设备,就可以看到摄像头的预览画面了。下载AMcap来打开摄像头。方法打开开始菜单,右键“计算机”选择“管理”;在“计算机管理”窗口左边一栏,双击“设备管理器”。然后,从右边栏中找到“图像设备”,点开。方法一:首先右键点击“计算机”,选择“管理”。接着打开里面的“设备管理器”,在图像设备中找到自己的摄像头,右键选中,选择“属性”。首先在电脑中打开win7系统的开始--设置。然

导读:许多用户询问关于Mac双系统键盘无法输入的问题。本文将提供详尽解答,以帮助解决这个问题。请继续阅读,希望对您有所帮助!苹果电脑双系统连接不了键盘您要问的是苹果双系统win7为什么用不了键盘了?苹果电脑硬件升级。根据查询中关村在线网显示,苹果电脑硬件升级后,导致原版Windows7无法识别苹果的键盘和鼠标,解决这个问题的方法是修改Windows7的安装文件,添加相应的驱动程序。在更换为日文键盘的驱动时,需要进行以下步骤:首先,进入Windows10系统下的“设备管理器”,找到“键盘”分类。然

有些朋友在使用Windows7操作系统时,遇到了无法安装驱动程序的问题,这是因为组策略限制了驱动程序的安装。解决这个问题很简单,只需要在组策略编辑器中取消限制即可。接下来,我将为大家详细介绍解决方法,请跟随我的步骤一起操作。win7驱动安装被策略阻止:1、首先按下键盘“win+r”组合键调出运行。在开始之前,我们需要打开组策略编辑器。请按照以下步骤操作:1.打开开始菜单。2.在搜索栏中输入“gpedit.msc”。3.按下回车键,确认执行该命令。4.组策略编辑器将会打开。通过以上步骤,您将成功打


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

EditPlus Chinese cracked version
Small size, syntax highlighting, does not support code prompt function

SublimeText3 English version
Recommended: Win version, supports code prompts!

MinGW - Minimalist GNU for Windows
This project is in the process of being migrated to osdn.net/projects/mingw, you can continue to follow us there. MinGW: A native Windows port of the GNU Compiler Collection (GCC), freely distributable import libraries and header files for building native Windows applications; includes extensions to the MSVC runtime to support C99 functionality. All MinGW software can run on 64-bit Windows platforms.

SublimeText3 Linux new version
SublimeText3 Linux latest version

SAP NetWeaver Server Adapter for Eclipse
Integrate Eclipse with SAP NetWeaver application server.
