MSI z390 motherboard

The difference between the two m.2 interfaces on the MSI z390 Tomahawk motherboard

There are two M2 interfaces. MSI MPGZ390GamingPlus motherboard has two M.2 interfaces, M.2-1 is close to the CPU, and M.2-2 is under the graphics card slot. If two M.2 interfaces are used together, it will affect the hard disk speed and graphics card performance.

The z390p motherboard provides two M2 interfaces. Both M2 interfaces are full speed. You can install the solid-state drive to any interface I. It is recommended to install it on the lower interface for better heat dissipation. .

One port is between U and the graphics card, and the other is under the graphics card. One is hotter and the other is colder. Most b360 motherboards have the bottom one at full speed and the top one at half speed. But there is also the reverse. For details, please look at the logo on the motherboard or the motherboard manual.

This motherboard has two M.2 interfaces with M keys, and there is also an M.2 interface with E keys specifically for wireless network cards.

The protocols of the two interfaces are different, one is the NVME protocol and the other is the SATA bus.

MSI motherboard z390 bios interface is gray

1. The safe boot option of MSI motherboard is gray, which usually means that the function is currently unavailable or disabled. There are several situations that may cause the Secure Boot option to be grayed out: BIOSUEFI version not supported: Some older MSI motherboards may not support the Secure Boot feature.

2. Press the computer startup shortcut key F2part and other keys to enter the BIOS settings. Enter the BIOS setting method for each brand of computer; find the default value for operating system optimization and set it to disabled or other operating systems; if it is still Gray, the default charging settings are reset.

3. When entering the BIOS, you must enter the admin password, or the administrator password; after that, you can enter the BIOS interface, but the BIOS settings are locked, so most of them are gray and cannot be changed. If you want to change BIOS settings, you also need to enter the user password.

What kind of chassis can be used for the MSI Blade z390 motherboard?

1. SAMA Tank 3 computer main chassis, JD.com quotes 219 yuan. .

2. X99 motherboard can use common ATX, E-ATX and Micro-ATX cases. ATX cases are mid-sized cases, typically larger than Micro-ATX cases, and can accommodate a wider range of hardware combinations, making them a good choice for X99 motherboards.

3. ATX chassis can basically be used. Z490 is a high-end motherboard. Generally, it is not recommended to consider an ultra-thin chassis within 200. It does not match the motherboard grade and has poor scalability, so it is generally recommended to consider 250- For a 600 yuan chassis, you can choose it according to your needs, such as appearance, scalability requirements, and what kind of radiator to match.

4. It can be equipped with this chassis: Antec Avengers X (DA601). You can also check out this configuration: Processor: Intel i9 original box 10850K. Cooling: Kyushu Fengshen Fortress 360 RGB integrated water cooling. Water cooling: Kyushu Fengshen Fortress 360. Motherboard: MSI MPGZ490 GAMING EDGE WiFi Blade.

5. Z390 motherboard is suitable for Intel’s three ninth-generation Core processors, namely i5-9600K, i7-9700K and i9-9900K processors. From the perspective of positioning, the Z390 motherboard is positioned as a high-end model, suitable for the latest Core 9th generation processors that support overclocking.

6. Chassis: MSI MPG VELOX 100R Blade Here is a brief introduction to the "car" of Intel's 12th generation processor i7 12700K - MSI MPG Z690 EDGE TI WIFI DDR4 Blade titanium motherboard.

The above is the detailed content of MSI z390 motherboard. For more information, please follow other related articles on the PHP Chinese website!