What should I do if the system gets stuck after one-click reinstallation in System Home?

System Home's one-click system reinstallation is a convenient and fast system recovery tool, but sometimes it may freeze or get stuck. If you encounter this problem, you can try to restart your computer or wait for a while to see if it returns to normal. If the problem persists, you can try using other system recovery tools or contact System Home customer service for help. In short, the key to solving problems lies in patience and care.

What to do if the system is stuck after one-click reinstallation in System Home

1. Modify bios settings and change to traditional mode boot

1. Restart the notebook and press F2 to start. Hotkeys (specific startup hotkeys require users to refer to their own computer brand)

2. Enter the BIOS and set Secure Boot Control to Disabled under Security as shown in the figure below

3. Go to the Boot interface, select UEFI Setting and press Enter.

4. Select UEFI Boot and press Enter to set it to Disabled. If there is CSM, set it to Enabled and press F4 to save.

PS: If there is a legacy boot option, change it to the legacyboot option.

2. Modify the hard disk partition table type

1. After opening the program, we select "U disk boot disk" and click.

2. After entering the interface, users do not need to modify the format. They can directly click "Start Production" in the default format.

3. Wait for the PE data to be downloaded during the process.

4. After the PE data is downloaded, the software will prompt some prompts, just click OK.

3. Notes

1. If you are stuck for a long time while waiting for PE data, There is no progress in downloading the PE data. We need to manually delete the "U Installation" and "Zjds" folders in the D drive, and then download the latest version of System Home to reinstall the system with one click and restart.

2. In the last step, after the U disk startup disk is created, please try to click Simulate Start - BIOS Start in the lower right corner, and you can see that the U disk startup disk has been created. If the following screen appears, it means it has been created.

The above is the detailed content of What should I do if the system gets stuck after one-click reinstallation in System Home?. For more information, please follow other related articles on the PHP Chinese website!