Detailed steps for installing the system into a USB flash drive

php editor Baicao brings you the detailed steps to install the system into the USB flash drive. First, insert the USB flash drive and back up the data. Then, download the system image file and unzip it. Then, run the installation creation tool and select the USB disk as the installation target. Finally, start making the USB boot disk and wait for completion. In this way, you can easily install the system into the USB flash drive for system installation or repair at any time.

Tool materials:

Computer brand and model: Lenovo ThinkPad X1 Carbon

Operating system version: Windows 10

Software version: Rufus 3.11

1. Prepare U disk and system image file

1. First, we need to prepare a U disk with a large enough capacity, it is recommended to be at least 16GB. Make sure the USB flash drive does not contain important data as it will be formatted during the production process.

2. Secondly, we need to download the required system image file. It can be downloaded from the official website or other reliable sources, ensuring that the file is complete and has not been tampered with.

2. Use Rufus to make a bootable U disk

1. Open the Rufus software and insert the U disk into the computer.

2. In the Rufus interface, select the correct U disk device.

3. In "Boot Selection", select the "Create bootable disk from ISO image" option, and click the "Select" button to select the system image file downloaded previously.

4. In "Partition Scheme", select "MBR" (applicable to BIOS and UEFI).

5. Click the "Start" button and Rufus will start creating a bootable USB flash drive. This process may take some time, please be patient.

3. Set the computer startup sequence

1. Insert the prepared bootable USB disk into the computer where the system needs to be installed.

2. Restart the computer and press the corresponding key (usually F2, F12 or Delete key) when booting to enter the BIOS settings.

3. In the BIOS settings, find the "Boot Sequence" or similar option, and put the bootable USB disk first.

4. Save the settings and exit the BIOS. The computer will boot from the USB disk.

4. Install the system to the target device

1. Follow the prompts on the system installation interface to select language, time zone and other settings.

2. Select the installation target device, which can be the computer's hard disk or other storage device.

3. Wait for the system installation to be completed. Some settings and confirmations may be required during this period.

4. After the installation is completed, restart the computer and the system will start from the target device.

Summary:

Through the above steps, we can install the system into the USB flash drive and use it at any time when needed. This method is very convenient, especially if you need to use the same system on different computers. I hope the introduction in this article will be helpful to you, and I wish you success in loading the system!

The above is the detailed content of Detailed steps for installing the system into a USB flash drive. For more information, please follow other related articles on the PHP Chinese website!