Home > Article > Computer Tutorials > How to disable the integrated graphics card in the BIOS?
php editor Baicao will introduce to you today how to block the integrated graphics card in the BIOS. For some users who need a discrete graphics card to improve performance, blocking the integrated graphics card can better take advantage of the performance advantages of the discrete graphics card. Next, we will introduce in detail the method of shielding the integrated graphics card so that you can easily achieve performance improvement.
Under normal circumstances, integration will be automatically blocked after plugging in a separate graphics card or independent network card.
Different motherboards may have different settings for the integrated graphics card in the CMOS parameters.
If there is no automatic shielding, you can press DEL when booting up to enter the BIOS settings. There is an item On-Chip Video in Advanced Chipset Features. If using a separate graphics card, this item should be set to: Disabled . If using integrated graphics, this item must be set to: Enabled.
Or enter the BIOS and select PNP/PCI Configurations→Primary Graphics Adapter to select the type of graphics card you choose, then exit and save.
As long as you turn on the computer and press the DEL key to enter the BIOS, you can disable the integrated graphics card.
1. Disable the integrated graphics card settings in the BIOS. Press DEL or other keys to enter the BIOS when you turn on the computer. Select Advanced ChipSet Features.
2. After entering, select on-chip video or related video settings, select disabled, save and exit.
3. Generally speaking, for motherboards with integrated graphics, as long as a separate graphics card such as Jingying GTX650 is installed, you only need to unplug the monitor cable from the integrated graphics card, and then connect the monitor cable to The signal output interface of this independent graphics card can be turned on and installed with the driver, and the integrated graphics card will be automatically blocked.
The settings for disabling integrated graphics in the BIOS vary depending on the specific motherboard, but generally you can follow the following steps:
1. Turn on the computer and enter the BIOS setup interface. When you press the shortcut key specified by your computer manufacturer (such as DEL, F2, etc.) when booting, you will usually be prompted in a corner of the screen which key to press to enter the BIOS settings.
2. After entering the BIOS, find the display option in the menu, and then find the integrated graphics option (may be called IGP, Integrated Graphics, etc.).
3. Set the integrated graphics option to disabled or off, then press F10 to save and exit the BIOS.
Please note that if you have both a discrete graphics card and an integrated graphics card installed, disabling the integrated graphics card will only allow you to use the discrete graphics card. If you need to enable integrated graphics again, please re-enable the integrated graphics option in the BIOS.
The above is the detailed content of How to disable the integrated graphics card in the BIOS?. For more information, please follow other related articles on the PHP Chinese website!